JLab Crasher Handleiding

JLab Cradle/docking station Crasher

Bekijk gratis de handleiding van JLab Crasher (6 pagina’s), behorend tot de categorie Cradle/docking station. Deze gids werd als nuttig beoordeeld door 54 mensen en kreeg gemiddeld 4.9 sterren uit 27.5 reviews. Heb je een vraag over JLab Crasher of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/6

CRASHER BLUETOOTH

WIRELESS STEREO SPEAKER

INSTRUCTION MANUAL

INTRODUCTION

Thank you for purchasing the Crasher. We are excited to welcome you to the JLab community. As an owner

of the Crasher portable Bluetooth speaker, we are here to help assist you with any product questions or issues

that come your way.

The Crasher ooth wireless speaker system applies the latest wireless technology that enables Bluet Bluetooth

you to enjoy , and hands free calls wherever wireless music, audio you want.

WHAT’S INCLUDED

1. The Crasher Bluet ooth stereo speaker

2. USB to Micro USB charging cable

3. 3.5mm to 3.5mm AUX audio cable

4. Power adapter with USB jack

5. Soft carrying pouch

FEATURES & BENEFITS

1. ooth tBlue Wireless Connectivity

2. Quality ound Hi-Fi stereo s

3. Hands free call control

4. attery devices Built In B Power Pack to charge your via full sized USB port

5. feet Use up to 33 away

6. Around 18 hours of operation time (median volume level)

GET TO KNOW THE CRASHER

1. Power On/Off Control

2. Battery Check / Bluetooth Pair Button

3. Pairing/Battery Check LED Indicators

4. Charging Red/Green LED Indicator

5. 3.5mm Audio In Jack to connect non BT devices

6. Micro USB Charge In Jack for charging the speaker

7. Telephone Call Button

8. Volume +

9. Volume –

10. USB Charging Out Jack (to external portable devices)

11. Microphone location

12. Speaker Drivers

13. Back Passive Woofer (located on back panel of unit)

1 - st Step CHARGING CRASHERTHE

1. Make sure the speaker is fully charged before initial use.

2. Connect the speaker via the Micro USB port (see item 6 above) to your PC or wall outlet using the Micro

USB cable and/or 5V Power Adapter.

3. The Battery LED (see item 4 above) will illuminate in red while charging and should become green once

fully charged. Another way to check if fully charged, ck the Battery Check button once (see item 2 . is to cli

above). If all 4 LED indicators light up, your Crasher is almost or fully charged. If only 1 3 of the LED –

lights light up, please continue charging your device.

4. JLab recommends charging the Crasher overnight with the Micro USB for optimum performance.

5. If you encounter any issues while using your Crasher, please first check to ensure device is fully charged

before troubleshooting the issue and contacting Support.

2nd Step - POWER UP

1. Once the Crasher is fully charged, l utton toggle switch ocate the Power B (see item 1 above).

2. Slide toggle to the right to power on. LED lights and sound should further indicate that the Crasher is on.

3. To power off, slide toggle to the left.

3rd Step - GET CONNECTED VIA BLUETOOTH

1. Crasher turned Make sure the is ON (See 1st and 2nd Step)

2. Press the Pair/Battery Check button and hold for about 5 seconds or until the 4 LEDs flash.

3. Bluetooth compatible device. Enable the searching mode on your (Most commonly found on your

smartphone under Settings, then Bluetooth, then by turning BT On / Searching for Devices.)

4. Select “ JLab Crasher” in the list shown on your Bluetooth device / smartphone.

5. a Enter “0000” if password is required.

6. When the Bluetooth connection is made, the first LED will flash slowly. – Please allow 10 20 seconds for

your device to connect.

7. Once connected, select your music, videos or calls and see your sound instantly amplified with the JLab

Crasher.

8. Please note, only one device may be connected at a time. To connect another Bluetooth device, you must

disconnect with the Crasher from your device / smartphone.

9. To reset the Crasher and void any existing connections, hold down the Pair/Battery Check button (see item

Product specificaties

Merk:	JLab
Categorie:	Cradle/docking station
Model:	Crasher
Kleur van het product:	Zwart
Materiaal behuizing:	Aluminium
LED-indicatoren:	Bezig met opladen
Capaciteit van de accu/batterij:	1500 mAh
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Bluetooth-versie:	2.1+EDR
Connectiviteitstechnologie:	Bedraad en draadloos
Type stroombron:	AC,Battery
Meegeleverde kabels:	AUX,USB
Inclusief AC-adapter:	Ja
Accu/Batterij voltage:	3.7 V
Gemiddeld vermogen:	3 W
Ondersteund aantal accu's/batterijen:	2
Aantal luidsprekers:	1
Volumeregeling:	Digitaal
FM-radio:	Nee
Ingebouwde microfoon:	Ja
Levensduur accu/batterij:	18 uur
Opbergetui:	Ja
Aanbevolen gebruik:	Mobiele telefoon/smartphone
Impedantie:	- Ohm
3,5mm-connector:	Ja
Ingebouwde accu:	Ja
USB oplaadpoort:	Ja
Audio-uitgangskanalen:	2.1 kanalen
Aantal drivers:	2
Frequentiebereik:	20 - 20000 Hz
Signaal/ruis-verhouding:	90 dB
AUX ingang:	Ja
Bereik van Bluetooth:	10 m
Luidspreker soort:	1-weg
Totale harmonische vervorming (THD):	0.5 procent
Meegeleverde subwoofer:	Ja
Versterker:	Ingebouwd
Opladen via USB:	Ja
Afstandsbediening inbegrepen:	Nee
Wifi:	Nee
Type product:	2.1 draagbaar luidsprekersysteem
Batterijtechnologie:	Lithium-Ion (Li-Ion)