JL Audio Stealthbox SB-F-SUPRDTY/10W1v3 Handleiding

JL Audio Niet gecategoriseerd Stealthbox SB-F-SUPRDTY/10W1v3

Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio Stealthbox SB-F-SUPRDTY/10W1v3 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

➔

Stealthbox™

I N S T A L L A T I O N G U I D E

SB - F -SU P D T Y/ 1 0 W Ø, J L AU D I O , I n c 2 0 0 3 Sh e e t S K U # 0 1 1 1 1 0 Revi s i o n 1 1 / 0 5 / 0 3Pag e 1

for the

SB-F-SUPRDTY/10WØ

(Fits ‘98-Up Standard, Super Cab &

Crew Cab with Front 40/20/40 Split

Bench Seat )

This Stealthbox™ is a product

which requires professional

installation skills and tools.

Please read this installation guide

thoroughly before beginning the

project. It will guide you step by

step through the installation. Several

of the steps in this process may

require two people to accomplish.

It is absolutely vital that the

enclosure be properly mounted to

the vehicle according to these

instructions. Failure to mount the

enclosure properly presents two

problems: 1) The sub-bass

performance will suffer due to the

movement of the enclosure caused

by the force exerted by the

woofer(s) and 2) A loose enclosure

presents a serious safety hazard in

the event of a collision or sudden

deceleration.

Please enjoy your JL Audio®

Stealthbox™ responsibly.

Step 1: Remove the 40/20/40 split front bench

seat from truck.

STEP 2:

Remove the side plastic panel from

armrest assembly.

STEP 3: Remove the floor seat brackets

from under the OEM center seat.

STEP 4:

Remove the center seat from the

armrest assembly, by removing the OEM bolts.

STEP 5: Once the seat is removed, peel off

the OEM center seat uphostry.

The OEM uphostery will be used to recover

the Stealthbox™, in later steps.

STEP 6:

There are two different cushions in

the 40/20/40 front bench seat.There are two

differnt instruction procedures for the differnt

style cushions.

This is the type 1 cushion.

START

HERE

Continued on Page 2 ➔

w w w . j l a u d i o . c o m

➔

Look at the seating plate’s bottom

right corner.You will see a

moutning rod.

On the type 1 cushions, the

rod extends pass the side of the

plate.

➔

➔ ➔

➔➔

➔

STEP 7: The driver’s side of the Stealthbox™

only has one threaded mounting insert.

*Important*

If you are working on a type 1 cushion, use

the supplied 3/4” spacer. If you are working on

a type 2 cushion, then use no spacer.

The spacers need to mount between the

Stealthbox™ and the armrest assembly.

Cont.

From

Page 1

Continued on Page 3 ➔

➔

On the type 2 cushions, the rod

does not extends pass the side of

the plate.

STEP 9: Wrap the Stealthbox™ using the OEM

uphostry that was removed in STEP5.

To secure the OEM uphostry to the Stealthbox™, use

the supplied hook strips, apply one piece to each of the

front and rear flaps of the seat cover.The side flaps do

not need the strips.

Attach the loop strips to the Stealthbox™.

Make sure that hook and loops strips are lined up with

each other. If they are not lined up properly, the OEM

uphostry will not be secure to the Stealthbox™.

➔

STEP 11: Attach the OEM floor seat brackets to

the Stealthbox™ using the factory bolts, that were

removed in STEP 3.

Be sure that the side OEM uphostry flaps are

tucked between the seat bracket and the

Stealthbox.

STEPS 9 & 10, require some patience.The

spacers and brackets must be aligned with

each other in addition to the aligning the bolt

holes.

STEP 8: The passenger’s side of the Stealthbox™

has a pair of threaded inserts. Use the supplied pair

of 7/8” spacers.

The spacers are going to mount between the

Stealthbox™ and the armrest assembly.

SB - F -SU P D T Y/ 1 0 W Ø, J L AU D I O, I n c 2 0 0 3 Sh e e t SK U # 0 1 1 1 1 0 Re v i s i o n 1 1 / 0 5 / 0 3Pag e 2

w w w . j l a u d i o . c o m

➔

This is the type 2 cushion.

Notice that cushion type 2 has an upside down

pyramid shape towrds the front.

STEP 10: With the OEM uphostry

applied. Using the supplied 3/8” hex head

bolts, mount the armrest assembly to the

Stealthbox™.

*IMPORTANT*

Make sure that you are using the correct

supplied spacers on the correct side of the

Stealthbox™.The supplied bolts are to be

mounted through the spacers.

➔

Specifications:

Enclosure Type: Acoustic Suspension (Sealed)

Driver Type: One JL AUDIO® 10WØ Subwoofer

Nominal Impedance: 4Ω

Cont. Power Handling: 125 Watts

JL Audio recommends using a high quality amplifier such as the JLAudio® 250/1. The diagram below shows the recommended

crossover, infrasonic filter and equalizer settings for the 250/1 when being used to power the the Audio Stealthbox™.

Included Hardware:

(3) 3/8”-16x1x1/2” hex head bolts

(3) 3/8” split lock washer

(2) 3/4”x7/8”(L)x3/8”alum spacer

(1) 3/4”x3/4”(L)x3/8” alum spacer

(2) backing loop

(2) backing hook

10369 N. Commerce Pkwy, Miramar, Florida 33025-392 Phone: 954.443.1100 Fax: 954.443.1111

The JL Audio 250/1 is a very versitile audio component. Please consult the owner’s manual for detailed information

about installing and tuning this amplifier.

➔ ➔

STEP 12: Run and attach speaker wire to the

Stealthbox™. Double check the woofer for proper

function.

STEP 13: Bolt the 40/20/40 split front bench seat

back into the truck using the OEM bolts, from

STEP 1.

Cont.

From

Page 3

➔

SB - F -SU P D T Y/ 1 0 W Ø, J L AU D I O , I n c 2 0 0 3 Sh e e t S K U # 0 1 1 1 1 0 Re v i s i o n 1 1 / 0 5 / 0 3Pag e 3

w w w . j l a u d i o . c o m

Mid/High Frequency Driver Information:

CONGRATULATIONS!

INSTALL COMPLETE.

XR570-CSi

TR570-CXi

Front Location Driver Size:

5”x7"

Applicable JL Audio® Products:

TR570-CXi, XR570-CSi or CXi

Rear Location Driver Size:

5”x7”

Applicable JL Audio® Products:

TR570-CXi, XR570-CXi

Product specificaties

Merk:	JL Audio
Categorie:	Niet gecategoriseerd
Model:	Stealthbox SB-F-SUPRDTY/10W1v3

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio Stealthbox SB-F-SUPRDTY/10W1v3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd JL Audio

JL Audio MediaMaster MM105-HR Handleiding

11 Maart 2024

JL Audio JLINK RX Handleiding

8 Januari 2024

JL Audio Stealthbox SBA-J-JK-FHB Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-F-SUPRDTY/10W1v3 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-D-QDRAM/10W3v3 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-GM-C6CONV/8W3v3 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-J-JL4DDRV/10TW1-4 Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-F-F1502/10W3v3/TN Handleiding

31 Augustus 2023

JL Audio Stealthbox SB-N-350/10W3v3 Handleiding

31 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024