Ion QUICK PLAY FLASH Handleiding

Ion Platenspeler QUICK PLAY FLASH

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion QUICK PLAY FLASH (20 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
QUICK PLAY FLASH
QUICKSTART GUIDE
ENGLISH ( 2 – 4 )
GUÍA DE INICIO RÁPIDO
ESPAÑOL ( 5 – 7 )
GUIDE D'UTILISATION RAPIDE
FRANÇAIS ( 8 – 10 )
GUIDA RAPIDA
ITALIANO ( 11 – 13 )
KURZANLEITUNG
DEUTSCH ( 14 – 16 )
SNELSTARTGIDS
NEDERLANDS ( 17 – 19 )
2
2
7
5
5
4
7
3
1
QUICKSTART GUIDE
BOX CONTENTS
o Make sure that the items listed below are included in the box:
QUICK PLAY FLASH
Slipmat
Power adapter
USB Flash Drive
Software CD
USB Cable
Quickstart Guide
Safety Instructions & Warranty Information
o READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
INTRODUCTION
You should install EZ Vinyl/Tape Converter to take advantage
of computer recording. EZ Vinyl/Tape Converter is the quickest
and easiest way to turn your recordings into digital media. EZ
Vinyl/Tape Converter conveniently saves your recordings in
your iTunes* library. We have included a handy software
Quickstart Guide with step-by-step instructions on software
installation and operation.
To install the software: simply insert the included CD into your computer and follow the on-screen instructions. After
you finish converting your vinyl, you can then burn to CD or load onto portable media devices.
Visit www.ionaudio.com/computer-optimization for more information on optimizing your computer for audio.
* iTunes is a trademark of Apple, Inc., registered in the U.S.A. and other countries.
TOP PANEL
1. 45 RPM Adapter- Use this adapter to play
your 45 RPM records.
2. Platter – Place your slipmat and record here.
3. Tonearm- QUICK PLAY FLASH comes with
a ready to use pre-balanced tonearm and
cartridge. The tonearm can be raised and
lowered by hand, or by pressing the raise /
lower lever. Please note that the tonearm
needs to be moved away from resting
position (on the arm clip) for the turntable
motor to activate. When the tonearm is
placed back in its resting position, the
turntable motor will deactivate.
4. Arm Clip – This specially designed arm clip
secures the tonearm while at rest or when
not in use. The arm clip has been designed to remain in the up position while unlocked.
5. Raise / Lower Lever – Raises and lowers the tonearm.
IMPORTANT: Remove the plastic cartridge cover
(needle cover) before operating the turntable.
Visit www.ionaudio.com/ezvc to download
the latest version of EZ Vinyl/Tape Converter
software or for helpful troubleshooting guide
and additional su
pp
ort.
3
* If needed, you may adjust the speed of the
turntable platter by tightening/loosening the
appropriate screw (there are separate screws
for 33/45/78 RPM operation on the underside
of QUICK PLAY FLASH) with a standard
Phillips-head screwdriver.
FRONT PANEL
1. VOLUME - hold down "-" or "+" button to increase/decrease volume;
2. MODE - enters Playback or Record Mode. Press this button firmly for
about half a second -- don't just tap it.
3. FORWARD/BACK - moves to the previous/next track on the flash drive
4. f / / - Play, Pause, and Record functions.
See PLAYBACK/RECORDING section for more information.
Solid red light: Ready to record (Record Mode).
Flashing red light: Recording a song.
Solid green light: Ready to play (Playback Mode).
Flashing green light: Playing a song.
5. USB PORT - connect a USB flash drive here
REAR PANEL
1. RCA OUTPUT – Line-level coaxial output; do not
connect to phono-level inputs (on a receiver).
Note: You must be in Record Mode to hear audio
through these outputs when playing a record.
2. USB – Connect to a computer to record audio
with EZ Vinyl/Tape Converter; (QUICK PLAY
FLASH can not be USB-powered; this must use a
power adapter). Use the included USB Cable to
connect your turntable to your computer. For
transferring your vinyl records to your computer,
we have provided software on the included CD.
3. PHONES – Connect 1/8" stereo headphones here (not included). The RCA outputs stop playing audio once
headphones are connected.
4. 33/45/78 RPM SWITCH – Sets speed of the platter
5. Autostop Switch – This switch turns autostop on or off.
When autostop is on, the platter will start spinning when
the tonearm is placed over the record and stop spinning
when the record has reached the end. (When autostop is
off, the platter will always spin regardless of the position of
the tonearm.)
Note: If your record stops before a song is done playing, set the Autostop Switch to "off."
6. POWER - Use included adapter to connect to wall power (9V DC, 800mA, pin +, tip ).
PLAYBACK/RECORDING
HOW TO PLAY YOUR RECORDS
1. Place the record on platter.
2. Select speed (33/45/78 RPM); use the included 45 RPM adapter if needed.
3. Undo the armclip.
4. Use the Raise/Lower Lever to raise the tonearm, then move it over to the record.
5. Lower the tonearm onto record; the record will begin playing.
6. Adjust volume with VOL buttons or your speaker system.
7. When finished, raise the tonearm and return it to rest on the armclip.
HOW TO RECORD TO A FLASH DRIVE
1. Connect a USB flash drive to the turntable’s front USB port.
2. Follow Steps #1-3 in HOW TO PLAY YOUR RECORDS (above).
3. If the light next to the f / / button is lit solid red, proceed to Step 4. If it is lit green, press the Mode button
once.
4. To start recording, press and hold the f / / for about 2 seconds; the light will flash red, indicating it's
recording.
5. Lower tonearm onto the record; the record will play and the song will record.
6. When finished, press f / / for about 2 seconds to stop recording.
7. To record more songs, repeat Steps #2-6 above. When you are finished, raise the tonearm and return it to the
armclip.
123456
MODE
12345
f / / z


Product specificaties

Merk: Ion
Categorie: Platenspeler
Model: QUICK PLAY FLASH

Heb je hulp nodig?

Als je hulp nodig hebt met Ion QUICK PLAY FLASH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Platenspeler Ion

Handleiding Platenspeler

Nieuwste handleidingen voor Platenspeler