Ion LP 2 GO Handleiding

Ion Platenspeler LP 2 GO

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion LP 2 GO (20 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

QUICKSTART GUIDE

ENGLISH ( 2 – 4 )

GUÍA DE INICIO RÁPIDO

ESPAÑOL ( 5 – 7 )

GUIDE D'UTILISATION RAPIDE

FRANÇAIS ( 8 – 10 )

GUIDA RAPIDA

ITALIANO ( 11 – 13 )

KURZANLEITUNG

DEUTSCH ( 14 – 16 )

SNELSTARTGIDS

NEDERLANDS ( 17 – 19 )

QUICKSTART GUIDE

Make sure that the items listed below are included in the box:

• Quick Start Guide

• Safety Instructions and Warranty Information Booklet

• EZ Vinyl/Tape Converter Software CD

• Pre-Mounted Needle

• Pre-Mounted Slipmat

• 45 RPM Adapter

• USB Cable

• USB-to-AC Power Supply

READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT

Go to http://www.ionaudio.com for product registration.

INTRODUCTION

You should install EZ Vinyl/Tape Converter to take advantage of computer

recording. EZ Vinyl/Tape Converter is the quickest and easiest way to turn your

recordings into digital media. EZ Vinyl/Tape Converter conveniently saves your

recordings in your iTunes* library. We have included a handy software Quickstart

Guide with step-by-step instructions on software installation and operation.

To install the software: simply insert the included CD into your computer and follow

the on-screen instructions. After you finish converting your vinyl, you can then burn to CD or load onto portable media devices.

Visit www.ionaudio.com/computer-optimization for more information on optimizing your computer for audio.

* iTunes is a trademark of Apple, Inc., registered in the U.S.A. and other countries.

FEATURES

1. PLATTER – Place your record here.

2. TONEARM – LP2GO comes with a ready to use

pre-balanced tonearm and cartridge.

3. ARM CLIP – This specially designed arm clip

secures the tonearm while at rest or when not in

use. The arm clip has been designed to remain in

the up position while unlocked. When a record is

on the platter, place the arm clip down to avoid

scratching your vinyl.

4. 45 RPM ADAPTER HOLDER – Holds the

included 45 RPM adapter. When not using the

adapter, please place it in this holder.

5. VOLUME/POWER KNOB – To power on LP2GO, turn this knob clockwise

until it clicks. When powered on, use this knob to adjust the

volume. To turn off LP2GO, turn this knob counterclockwise until

it clicks.

6. 33 / 45 SWITCH – This switch controls the RPM of the turntable

platter.

7. SPEAKER – The record's audio will be played through this built-

in speaker.

8. USB/BATTERY SWITCH – When the switch is in the “down”

position, the turntable will be powered through a USB connection

– the USB AUDIO OUTPUT connected to either (A) your computer or (B) wall power, using the included USB-to-AC

power supply. When the switch is in the “up” position, the turntable will be powered by batteries (if batteries are installed).

9. HEADPHONE OUTPUT – Connect 1/8" stereo headphones here (not included). The speaker output stops playing audio

once headphones are connected.

10. USB PORT – Use the included USB cable to connect your turntable to your computer. The USB connection will provide

power to the turntable as well as the audio from the turntable to your computer. You can also power the turntable by

using the included USB cable and USB-to-AC power supply to connect your turntable to wall power.

Note: LP2GO may appear as “USB Microphone” or “USB Composite Device” in your computer’s sound control panel

(even though the included EZ Vinyl/Tape Converter manual says it appears as “USB Audio Codec”).

11. BATTERY COMPARTMENT – Remove the cover and place 4 AA batteries into this compartment. Be sure the positive

and negative poles of the batteries are facing the proper direction.

IMPORTANT: Make sure that the slipmat is

always placed on top of the platter while using

the turntable. Failure to use the slipmat may

cause damage to your media as well as damage

to the turntable.

Remove the plastic cartridge cover (needle

cover) before operating the turntable.

Visit www.ionaudio.com/ezvc to

download the latest version of EZ

Vinyl/Tape Converter software or for

helpful troubleshooting guide and

additional support.

OFF

33/45

USB

BATT

78910

HOW TO PLAY YOUR

RECORDS

1. Undo and lower arm clip.

2. Raise the tonearm, then

move it to the side.

3. Place the record on the

platter.

4. Select speed (33/45 RPM);

use the included 45 RPM

adapter if needed.

5. Lower the tonearm onto

record; the record will begin

playing.

6. Adjust volume with

ON/OFF knob.

7. When finished, raise the

tonearm and return it to

rest on the arm clip.

VOLUME

Product specificaties

Merk:	Ion
Categorie:	Platenspeler
Model:	LP 2 GO
Kleur van het product:	Zwart
Soort:	Draaitafel met directe aandrijving
Meegeleverde kabels:	USB
Snelstartgids:	Ja
Aantal USB-aansluitingen:	1
USB-versie:	2.0
Mac-compatibiliteit:	Ja
Nominale snelheid:	45 RPM