Intellytech LiteCloth Mega-6 Handleiding
Intellytech
Verlichting
LiteCloth Mega-6
Bekijk gratis de handleiding van Intellytech LiteCloth Mega-6 (5 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.9 sterren uit 8.5 reviews. Heb je een vraag over Intellytech LiteCloth Mega-6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5

,0_MEGA-6FC_MEGA-8FC_eng
11
E) Attention
1. Please read this manual before using this product and follow the instructions
2. Should be used with the appropriate voltage labeled on product. Make sure the power button is set to off
before pressing the power button. Please remove the power connection if the light is not in-use. Don’t pull the
power cable directly. Please grip the power plug and pull it out from the socket.
3. Make sure your hand is dry when inserting and unplugging the power plug. Don’t touch the metal part
directly.
4. Keep the environment dry and ventilated when using the product. Do not leave or use the product in a
humid or dusty environment. And keep it away from fire or extreme heat.
5. Clean this product only with a soft and dry cloth.
6. Do NOT apply extreme pressure and do not drop the product.
7. Improper installation may damage the light, and there can be high voltage inside the unit. Please Do NOT
open or repair the unit yourself. If there is any defect, please contact Intellytech directly.
8. Only use the specific Li-ion camcorder batteries according to the model of the battery holder on the rear
panel. Do not install 24V batteries.
9. Please do not look at the LEDs directly or touch them. Please turn off the light if it is unattended.
10. Please make sure the product cools down and put it back in the case after being used. Don’t store the
product in a humid environment, and avoid direct sunshine. Avoid freezing temperatures.
D) Temperature Notice:
Instruction Manual
LiteCloth 3.0
MEGA-8 / 6
Storing your Mega-LC in a cold or location?
For optimal power distribution, allow your Mega-LC 3.0 to warm up for
5 minutes using the following settings:
1: Set the bi-color LED’s to 5600k
2: Set the output to 10%
*This isn’t required but will help in evenly distributing power through
the LED’s. We recommend this if the light is being stored in a cold grip
truck or if it has recently shipped.
Need Help? Contact us now using Live Chat at www.intellytechusa.com.
We usually respond within 10 seconds during business hours and can help with
any questions.
Email: customerservice@intellytechusa.com

Connecting Mega LED Mat to Frame
1: Unfold Folding Frame, and tighten silver collar(s) to
lock in place.
(Make sure bar it is totally straight before
tightening silver collar).
2: Attach LED Mat to Frame by adding buckles and
straps.
3: Add CL-40L anywhere on center bar of the Folding
Frame.
Connecting 5" Softbox to LED Mat
1: Unfold Softbox, and lineup Velcro between the LED
Mat and Softbox.
** User Tip: Lean light and frame vertically against a wall
and then add softbox.
**Softbox Straps: These are optional and not required.
Attach these to reduce sag on your softbox.
**Optional lightweight modifiers shown below
(Using these will reduce the weight by 2-3 pounds compared to
using the included 5" deep softbox)
Pancake Lantern W/ Skirt
Pop-Up Diffuser
Product specificaties
Merk: | Intellytech |
Categorie: | Verlichting |
Model: | LiteCloth Mega-6 |
Heb je hulp nodig?
Als je hulp nodig hebt met Intellytech LiteCloth Mega-6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verlichting Intellytech
25 Februari 2025
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
Handleiding Verlichting
- Geemarc
- Smith-Victor
- NUVO
- Ferplast
- Sonneman
- Trio Lighting
- Manfrotto
- Verbatim
- Pauleen
- Litecraft
- Ecomed
- Bresser
- NGS
- Lightway
- Aquatica
Nieuwste handleidingen voor Verlichting
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025