Intellytech LiteCloth Mini Mega-4FC Handleiding

Bekijk gratis de handleiding van Intellytech LiteCloth Mini Mega-4FC (5 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.4 sterren uit 8 reviews. Heb je een vraag over Intellytech LiteCloth Mini Mega-4FC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

,0_MEGA-6FC_MEGA-8FC_eng

11

E)Attention

1. Please read this manual before using this product and follow the instructions

2. Should be used with the appropriate voltage labeledon product. Make sure the power button is set to off

before pressing the power button. Please remove the power connection if the light is not in-use.Don’t pull the

power cable directly. Please grip the power plug and pull it out from the socket.

3.Make sure your hand is dry when inserting and unplugging the power plug. Don’t touch the metal part

directly.

4. Keep the environment dry and ventilated when using the product. Do not leave or use the product in a

humid or dusty environment. And keep it away from fire or extreme heat.

5. Clean this product only with a soft and dry cloth.

6. Do NOT apply extreme pressure and do not drop the product.

7. Improper installation may damage the light, and there can be high voltage inside the unit. Please Do NOT

open or repair the unit yourself. If there is any defect, please contact Intellytech directly.

8.Only use the specific Li-ion camcorder batteries according to the model of the battery holder on the rear

panel. Do not install 24V batteries.

9.Please do not look at the LEDs directly or touch them. Please turn off the light if it is unattended.

10.Please make sure the product cools down and put it back in the case after being used. Don’t store the

product in a humid environment,and avoid direct sunshine.Avoid freezing temperatures.

D)Temperature Notice:

InstructionManual

LiteCloth 3.0

MEGA-4FC/ 3FC

Storing your Mega-LC in a cold or location?

For optimal power distribution, allow your Mega-LC 3.0 to warm up for

5 minutes using the following settings:

1: Set the bi-color LED’s to 5600k

2: Set the output to 10%

*This isn’t required but will help in evenly distributing power through

the LED’s. We recommend this if the light is being stored in a cold grip

truck or if it has recently shipped.

Need Help? Contact us now using Live Chat at www.intellytechusa.com.

We usually respond within 10 seconds during business hours and can help with

any questions.

Email: [email protected]

Product specificaties