Impact CS-PCX3 Handleiding

Bekijk de handleiding van Impact CS-PCX3 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

CS-PCX3

C-Stand

Pro Caster Set

INSTRUCTIONS

Thank you for choosing Impact.

The Impact C-Stand Pro Caster Set is compatible with any C-stand with legs up

to 1 inch in diameter. The 3-inch rubber wheels are mounted on rugged steel

offset brackets that lower the stand’s center of gravity and extend the footprint

diameter for stability, even if the stand is carrying a heavy load. Mobility is

effortless with 360° wheel rotation, and C-stands will glide over most surfaces,

including thick carpeting. Dual-action foot-operated wheel locks make locking

and unlocking fast and easy so repositioning a C-stand will take seconds. An

included hex key is the only tool you need to attach the casters to your C-stand.

The leg receivers feature dual hex bolts to prevent rotation once they’re

tightened.

• Please read and follow these instructions, and

keep this manual in a safe place.

• Clean the unit with only a soft, dry cloth.

• Make sure all attachment screws are tight and

secure before proceeding.

• Make sure that this product is intact and that

there are no missing parts.

• All images are for illustrative purposes only.

Attaching the Casters

1. Slide the C-Stand’s legs into the

caster’s receivers.

Note: Be sure to align the casters

so the center of the receiver is

aligned with the leg.

2. Use the included hex key to tighten

both hex screws until secure.

Note: Make sure to tighten both hex

screws evenly.

Beoordeel deze handleiding

Product specificaties

Als je hulp nodig hebt met Impact CS-PCX3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden