Impact LSA-LW25P Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Impact LSA-LW25P gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
LSA-LW22P / LSA-LW25P
22 and 25 mm
Locking Wheel
INSTRUCTIONS
2
Thank you for choosing Impact.
Specications
The Impact Locking Wheel Set ts on most tripod or light stand
legs with 22 mm (LSA-LW22P) or 25 mm (LSA-LW25P) diameter
tubes. The wheels feature sturdy construction, easy-to-operate
wheel locks, and metal brake shoes that assure a tight and secure
connection. The three-inch rubber wheels are easy to roll, even
on thick carpeting, and won’t scratch wood or polished surfaces.
• Please read and follow these
instructions, and keep this manual
in a safe place.
• Make sure everything is secure
before proceeding.
• Make sure that this product
is intact and that there are no
missing parts.
• All images are for illustrative
purposes only.
Connector SizeLSA-LW22P: 0.9 in. (22 mm)
LSA-LW25P: 1 in. (25 mm)
Wheel Diameter3 in. (75 mm)
Locking WheelsYes
MaterialSteel, polymer
Weight (set of 3)LSA-LW22P: 2.9 lb. (1296 g)
LSA-LW25P: 2.8 lb. (1287 g)
Scan for a complete listing of our
studio equipment or visit
www.ImpactStudioLighting.com/se
3
Attachment Instructions
1. Install the brake shoe by sliding
it into the receiver’s notch. Make
sure the post is at the bottom of
the receiver.
2. Fully insert the tripod leg into the
receiver until it touches the post
3. Tighten the knob until secure.
Locking and Unlocking the Wheels
To lock the wheels, press or step
down on the locking lever.
To unlock the wheels, use your toe to
push back the release tab on top of
the wheel.
Product specificaties
| Merk: | Impact |
| Categorie: | Niet gecategoriseerd |
| Model: | LSA-LW25P |
Heb je hulp nodig?
Als je hulp nodig hebt met Impact LSA-LW25P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden