Impact FOAM-FORK Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van Impact FOAM-FORK gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
FOAM-FORK
Foamcore Fork
INSTRUCTIONS
Thank you for choosing Impact.
Impact’s FOAM-FORK attaches to any foamcore board a 3/8-inch thick or larger.
It’s ideal for employing foamcore as a bounce board or ag in the studio or on
location. This photo and video accessory features a knurled baby pin for secure
and nonslip attachment. And for easy positioning, it’s compatible with grip
accessories with a 5/8-inch receiver like a grip head or super clamp.
• Please read and follow these
instructions, and keep this manual
in a safe place.
• The tines are sharp. Handle the
unit with care.
• Keep this product away from
children.
• All images are for illustrative
purposes only.
Specications
Number of Tines4
Tine length5.7 in. (14.5 cm)
MaterialSteel
Mount5/8 in. baby pin (16 mm)
Dimensions Width: 9.7 in. (24.6 cm)
Height: 11.7 in. (29.7 cm)
Weight1.4 lb. (636 g)
Mounting the Foam Fork
1. Attach a grip head to the C-stand’s baby pin,
and place a sandbag over the C-stand’s big
leg to prevent tipping.
2. Slide a grip arm through the grip head.
Make sure to use the correct orientation:
position the grip head end of the grip-arm to the
right when the grip head’s large locking knob
faces you.
3. Insert the FOAM-FORK’s baby pin into the grip
arm’s 5/8-inch hole. Adjust the foamcore to the
desired position, and tighten the locking
knob clockwise until secure.
Note: Make sure the C-stand’s big leg is in line
with the grip arm.
1
2
3
Attaching a Foamcore Board
Foamcore boards that are a minimum of
3/8-inch thick are recommended.
Center the tines and press them into the
foam core.
Product specificaties
| Merk: | Impact |
| Categorie: | Niet gecategoriseerd |
| Model: | FOAM-FORK |
Heb je hulp nodig?
Als je hulp nodig hebt met Impact FOAM-FORK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden