Ikan Mylo MB-1H2Q Handleiding
Bekijk gratis de handleiding van Ikan Mylo MB-1H2Q (7 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Ikan Mylo MB-1H2Q of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/7
support@ikancorp.com © 2017 ikan Corporation. All rights Reserved
www.ikancorp.com
713.272.8822
CHECKED BY
QUICKSTART GUIDE
MB-1H2Q
What’s Included
1 x Mylo Half x 1 Light Fixture
2 x Mylo Mini Quarter x 1 Light Fixture
1 x CP Stand Bag
1 x Light Bag
3 x Barn Doors
3 x CP Light Stands
3 x Dual Charger
3 x Neutral Diffusion Filter
3 x Power Supplies with Cable
6 x Sony “L” Style Batteries
Bi-Color 3-Point LED Light Kit
Getting to know your Mylo Mini (MB4)
Thank you for choosing Ikan Mylo Mini Bi-Color LED Light. This product will provide you with bright, portable illumination. It can
be used in a variety of different scenarios. It features ultra-bright 420 LED bulbs with 45° lens. It has 3200K-5600K variable
color temperature. With its removable barn doors and neutral diffusion filter, the Ikan Mylo Mini Light is the best choice for any
working professional.
This fixture has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and
understand the instructions in this manual carefully and throughly before attempting to operate this unit. These instructions
contain important information regarding safety during use and maintenance.
Every fixture has been throughly tested. Carefully check the shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your unit for damage and be sure all accessories necessary to operate
the unit have arrived intact. In the event damage has been found or parts are missing, please contact our customer support
team for further instructions. Please do not return this unit to your dealer without first contacting customer support at the
number listed below. Please do not discard the shipping carton in the trash. Please recycle whenever possible.
Safety Warnings
To guarantee a smooth operation, it is important to follow the guidelines in this manual. The manufacturer of this device will not
accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this
manual.
DO NOT try and disassemble or repair the MB4. The fixture must be returned to Ikan for repair or replacement.
DO NOT expose the water or rain; electric shock may occur.
DO NOT operate near flammable gas or vapors.
DO NOT use if the fixture emits smoke or flames. The power supply must be disconnected immediately to prevent bodily injury.
Handle Unit with care. Use only the recommended batteries.
General Guidelines
Mounting the Mylo Mini to a Camera
The Mylo Mini can be mounted to a camera by attaching the shoe mount supplied with the fixture to any camera that has a cold
shoe adapter. (Hot shoe adapters can be used with caution).
The Mylo Mini has a ¼-20" receiver in the bottom of the fixture that can receive the ¼-20" thread of the shoe mount. After
screwing in the mount and tightening the tension disk, the light is now ready to be attached to the camera. Loosening the
tension disk above the shoe adapter, you can slide the shoe mount into the cold/hot shoe of the camera and tighten down the
tension disk.
Mounting the Mylo Mini to a Stand
The Mylo mini can be attached to a stand as well buy using the supplied shoe mount that come with the fixture. The stands that
work most effectively with the Mylo Mini have a ¼-20 or 3/8-15 thread on the top of them. The shoe mount must be modified
to accept the stand by removing the bottom of the shoe and tightening disk from the mount. This will have a ¼-20 insert in
the mount and that can be screwed down on the top of the stand. (Removing the ¼-20 insert allow for you to use the shoe
mount with a 3/8-15 stand instead) The Mylo Mini can now be attached to the top of the shoe mount on the stand. This allow
movement of 360 degrees for placement of the fixture in any position that is desired.
Powering the LEDs
The Mylo Mini can be powered by AC power supply of from the supplied Sony “L” Style Batteries. The AC power supply has a
4ft length and allows you to plug the lights into any standard 120-240V outlet. The Mylo Mini can be powered by the supplied
Sony “L” Style batteries Either one or two batteries can be used to power up the fixture.
Adjusting the Color & Brightness of the Light
The Mylo Mini LED Light is controlled by the large yellow knob on the rear of the fixture. The knob was designed with the idea
that it could be reached and adjusted when the light is up on a stand. The knob has two push settings.
1. The default setting is the brightness, from 10%-100% brightness.
2. By pressing in on the knob the color temperature can be adjusted. (Bi-Color Lights)
Fixture Overview: (Front)
Fixture Overview: (Back)
Product specificaties
| Merk: | Ikan |
| Categorie: | Lamp |
| Model: | Mylo MB-1H2Q |
Heb je hulp nodig?
Als je hulp nodig hebt met Ikan Mylo MB-1H2Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lamp Ikan
1 Juli 2025
1 Juli 2025
19 Maart 2025
Handleiding Lamp
- Brilliant
- Broncolor
- Osram
- Toolcraft
- Impact
- Xiaomi
- Neewer
- Steinhauer
- Profoto
- NUVO
- Kartell
- Mission
- Innoliving
- Nanlite
- Beghelli
Nieuwste handleidingen voor Lamp
1 Juli 2025
1 Juli 2025
1 Juli 2025
29 Juni 2025
29 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025