IHealth PT3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IHealth PT3 (20 pagina's) in de categorie Thermometers. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
User’s Manual
Mode d'emploi
Manual de usuario
Infrared No-Touch Forehead Thermometer
l'infrarouge Pas de contact forhead thermomĂštre
Infrarrojos TermĂłmetro sin contacto frente
Version 1.0
Product introduction
Caution
(1) Measurements
1
Thank you for choosing our product.
This product is a high-tech infra-red (IR) thermometer
designed to take human body temperature by measuring the
energy of IR emitted from the forehead. The product helps
you to assess you and your family members’ health
conditions easily and quickly.
Product Name: Infrared No-Touch Forehead Thermometer
Product Model: PT3
1. Thermometer readings should be regarded as a reference.
Do not attempt self-diagnostics or self-treatment using the
temperature readings. Please seek professional medical
advice when necessary.
2. There is no absolute standard for human body
temperature. Knowing your own normal body temperature
range is important to accurately determine if you have a
fever.
3. Make sure that the forehead of the subject is free from
sweat, cosmetics, dirt, or grease before measuring.
4. Patients should not drink, eat, or be physically active
before/while taking a reading. Wait 30 minutes before
taking a measurement. Temperature readings taken when
a body is in a state of stable equilibrium is more accurate
and useful as a reference.
5. Do not take temperature measurement over scar tissue,
open sores or abrasions.
6. Do not measure body temperature from scar tissues on the
forehead as such tissues will aïŹ€ect temperature conduction
of the body.
7. If there is a temperature diïŹ€erence between the
thermometer storage area and the new ambient
environment around the subject, please let the
thermometer sit within the new environment for 30
minutes before taking the measurement.
8. Do not measure body temperature immediately after
consuming a drug that raises body temperature.
Temperature readings taken at this time will not be
accurate.
9. It is normal for readings taken from continuous
measurements to ïŹ‚uctuate within a small range. During
continuous measurements, the subject’s body temperature
may be transmitted to the thermometer, aïŹ€ecting
Safety Precautions
Warning
Use of this thermometer is not intended as a substitute for
consultation with your physician. Please consult your doctor
if you have any doubt about the temperature reading.
For consumer use only, not for professional use.
Keep the thermometer out of reach of children. For
accidental swallowing of the battery or other components,
please contact emergency services immediately.
Batteries must not be thrown into an open ïŹre or short
circuited.
Contents
Product introduction
Safety Precautions
Caution
Overall Description
Product performance
Expected use and scope of applications
Contraindications
Instruction For Use
Product errors and troubleshooting
Care and Cleaning
Maintenance
Disposal
Operating, shipping, and storage conditions
Accessories
Standard icons
Calibration
Storage
Electromagnetic Compatibility (EMC) Tables
WARRANTY
1
1
1
2
3
4
4
4
6
7
7
7
8
8
8
8
9
Body temperature 6
9
11
EN
2 3
LED screen instructions
Temperature
display area
Celsius
Fahrenheit
Low power
reminder
Device dimensions: 5.39 in x 1.34 in x 1.54 in
Screen dimensions: 1.01 in x 0.75 in
Product weight: 90 g
Product performance
1. Measurement position: Centre of the forehead surface
2. Measurement distance: ≀1.18in(3 cm)
3. Power source: DC 3V; 2 x 1.5V AAA batteries
4. Measurement range: 89.6℉-109.2℉(32℃-42.9℃)
5. Measurement precision: ±0.4℉ within 95℉-107.6℉,
and±0.5℉ for other temperature ranges.
6. Resolution: 0.1℉
7. Clinical reproducibility: Within ±0.5℉
8. Operating conditions:
Temperature: 59℉-104℉(15℃-40℃)
Humidity: 15-85%RH, non-condensing
Atmospheric Pressure: 70~106kPa
9. Operation mode:
Adjusted mode: forehead
Direct mode: surface mode
10. Expected service life: 2 years
11. Reference Body Site: Oral
12. Software version: V1.0
1. This product is a precision device. Return the product to its
original packaging for proper storage after use. To ensure
accurate measurements, avoid the device or probe
contacting any liquid or droplets. Avoid tiny particles (such
as dust or powder) falling into the probe.
2. Avoid dropping or subjecting the product to external
forces. Do not disassemble or re-assemble the product on
your own.
3. Do not directly touch the probe with your ïŹngers or blow
on it. Measurements taken using a damaged or dirty IR
probe may be inaccurate.
4. Keep the product at a place inaccessible to children to
prevent children from swallowing the batteries or small
parts.
5. Do not throw the thermometer or batteries into ïŹre to
prevent explosions.
6. Remove the batteries from the thermometer if the device
will not be used for more than one month.
7.If you are allergic to plastic/rubber, please don’t use this
device.
8.The materials (ABS, TPU, metal) of expect contact with
patient had passed the ISO 10993-5 and ISO 10993-10
standards test, no toxicity, allergy and irritation reaction.
They are in compliance with the MDD requirements.
Based on the current science and technology, other
potential allergic reactions are unknown.
(2) About the product
measurement accuracy. We recommend taking only up to
3 continuous readings within a short period.
10. Do not directly face the sun or an air outlet of an air
conditioning or radiator device during the measurement
as this will cause changes to the forehead temperature.
Measurements should be taken in a stable environment
where possible.
11. Do not measure body temperature in an environment
with strong EM interference (examples include places
close to a working microwave, induction cooker, or
cellphone in-use) as EM interference may cause errors in
the reading or even device failure.
12. This product should be considered a personal device.
Clean and sanitize the product properly to prevent cross
contamination.
13. To clean a dirty thermometer probe, gently swipe the
probe using a cotton swab dipped in 75% alcohol. Let the
cleaned thermometer sit for at least 15 minutes before
taking more measurements.
14. This infrared thermometer meets requirements
established in ASTM Standard (E1965-98) Except of clause
5.2.2. It displays subject’s temperature over a range of 89.6
℉~109.2℉. Full responsibility for the conformance of this
product to the standard is assumed by (manufacturer:
Famidoc Technology Co., Ltd. Add:
No. 212 Yilong Road, Hexi Industrial Zone, Jinxia, Changan
Town, Dongguan 523853, Guangdong Province, China.)
LED display
area
Thermometer
probe
Distance
probe
Battery cover
Measurement
button
Overall Description
ASTM laboratory accuracy requirements in the display range
of 98°F to 102°F(37℃) for IR thermometers is ±0.4°F(±0.2℃),
whereas for mercury in-glass and electronic thermometers,
the requirement per ASTM Standards E667-86 and E1112-86
is ±0.2°F(±0.1℃).
The thermometer is mainly comprised of a plastic casing, IR
temperature sensor, MCU, vibration motor, LED display screen
and batteries.


Product specificaties

Merk: IHealth
Categorie: Thermometers
Model: PT3
Ingebouwd display: Ja
Gewicht: 90 g
Breedte: 34.03 mm
Diepte: 39.11 mm
Hoogte: 136.9 mm
Gebruikershandleiding: Ja
Meeteenheid temperatuur: F, °C
Kleur behuizing: Wit
Ondersteund aantal accu's/batterijen: 2
Display technologie: LED
Bereik temperatuurmeting: 32 - 42.9 °C
Batterijen inbegrepen: Ja
Type batterij: AAA
Display met achtergrondverlichting: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met IHealth PT3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden