IFM E30131 Handleiding


Bekijk gratis de handleiding van IFM E30131 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 3.6 sterren uit 12.5 reviews. Heb je een vraag over IFM E30131 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
Installation Instructions
Adapter
E30131
706005/00 05/2011
UK
ifm electronic gmbh • Friedrichstr. 1 • 45128 Essen • Germany
http://www.ifm.com • e-mail: info@ifm.com
2
Mounting sensor - adapter
D
A
B
C
1 2 3
Slightly grease the threads and sealing areas of the sensor and adapter with
the lubricating paste (A).
The paste must be suitable and approved for the application and compatible
with the elastomers used.
Place the sealing ring (B) in the groove (C) of the sensor.
The adapter is supplied with an EPDM O-ring. More sealing rings are available
as accessories: FKM O-ring, order no. E30123.
Screw the sensor into the adapter until it is hand-tight.
Clamp the sensor + adapter into a clamping device (D). Tighten the clamping
device only slightly so that the adapter does not warp.
Tighten the sensor using a spanner until you can feel the end stop (this cor-
responds to a maximum tightening torque of 35 Nm). Note: Further tightening
may affect the sealing effect.
Technical data and further information at www.ifm.com


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E30131

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E30131 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden