Husqvarna-Viking Scandinavia 400 Handleiding
Husqvarna-Viking
Naaimachine
Scandinavia 400
Bekijk gratis de handleiding van Husqvarna-Viking Scandinavia 400 (64 pagina’s), behorend tot de categorie Naaimachine. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over Husqvarna-Viking Scandinavia 400 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/64
KEEPING THE WORLD SEWING
5SERS'UIDE
This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed,
including the following:
Read all instructions before using this household sewing machine.
DANGER - To reduce the risk of electric shock:
• A sewing machine should never be left unattended when plugged in. Always unplug
this sewing machine from the electric outlet immediately after using and before clean-
ing.
• Always unplug before relamping. Replace bulb with same type rated 5 Watt.
WARNING - To reduce the risk of burns, fi re, electric shock, or
injury to persons:
• Do not allow to be used as a toy. Close attention is necessary when this sewing ma-
chine is used by or near children or infi rm persons.
• Use this sewing machine only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
• Never operate this sewing machine if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the sewing
machine to the nearest authorised dealer or service center for examination, repair, elec-
trical or mechanical adjustment.
• Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of the sewing machine and foot controller free from the accumulation of lint,
dust, and loose cloth.
• Keep fi ngers away from all moving parts. Special care is required around the Sewing
machine needle.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
• Do not pull or push fabric while stitching. It may defl ect the needle causing it to break.
• Switch the sewing machine off (“0”) when making any adjustment in the needle area,
such as threading needle, changing needle, threading bobbin, or changing presser foot,
etc.
• Always unplug the sewing machine from the electrical outlet when removing covers,
lubricating, or when making any other user servicing adjustments mentioned in the in-
struction manual.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is be-
ing administrated.
• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Hold plug when rewinding into cord reel. Do not allow plug to whip when rewinding.
SAVE THESE INSTRUCTIONS
Product specificaties
| Merk: | Husqvarna-Viking |
| Categorie: | Naaimachine |
| Model: | Scandinavia 400 |
Heb je hulp nodig?
Als je hulp nodig hebt met Husqvarna-Viking Scandinavia 400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Naaimachine Husqvarna-Viking
23 Mei 2025
15 Mei 2025
14 Mei 2025
5 Februari 2025
5 Februari 2025
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
Handleiding Naaimachine
- Solac
- Durabase
- Alfa
- Tristar
- Juki
- Bernina
- Bestron
- Kenmore
- Guzzanti
- Hema
- Aigger
- Empisal
- Mellerware
- Necchi
- Kohler
Nieuwste handleidingen voor Naaimachine
8 September 2025
8 September 2025
26 Augustus 2025
7 Juli 2025
4 Juli 2025
4 Juli 2025
15 Juni 2025
16 Mei 2025
14 Mei 2025
14 Mei 2025