HQ SEC-SA301RF Handleiding

HQ Rookmelder SEC-SA301RF

Lees hieronder de 📖 handleiding in het Nederlandse voor HQ SEC-SA301RF (37 pagina's) in de categorie Rookmelder. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/37

Français Nederlands Italiano Español Magyar Suomi Svenska Česky Română Ελληνικά

DeutschEnglish

SEC-SA301RF

MANUAL (p. 2)

Oprical Wireless Smokealarm

MODE D’EMPLOI (p. 8)

Détecteur de fumée optique sans l

MANUALE (p. 14)

Allarme Antifumo Ottico Senza li

BRUKSANVISNING (s. 26)

Ασύρματος Οπτικός συναγερμός

Καπνού

MANUAL DE UTILIZARE (p. 32)

Alarmă de fum optică fără cablu

HASZNÁLATI ÚTMUTATÓ (o. 20.)

Vezeték nélküli, optikai füstérzékelő

riasztó

KÄYTTÖOHJE (s. 23)

Langaton optinen palohälytin

ANLEITUNG (s. 5)

Optischer kabelloser Rauchmelder

GEBRUIKSAANWIJZING (p. 11)

Optische draadloze rookmelder

MANUAL DE USO (p. 17)

Alarma óptica inalámbrica de humos

NÁVOD K POUŽITÍ (s. 29)

Optický bezdrátový detektor kouře

ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 35)

Ασύρματος Οπτικός συναγερμός

Καπνού

EnglishDeutsch

FrançaisNederlandsItalianoEspañolMagyarSuomiSvenskaČeskyRomânăΕλληνικά

ENGLISH

The photoelectric wireless online smoke alarm KD-101LF can be interconnected as a system. Its

communication is very easy just through a LERN-IN button. In a learnable wireless online smoke alarm

system others will sound together if one smoke alarm detects the smoke and sounds. In this way the

alarm is set off.

The product is used in family homes and non-smoking areas.

• TESTING

1. Insert 9V battery and 3 x 1.5V battery (according to Figure).

2. The RED alarm LED will ash about every 40s in working condition (see Figure).

3. Press the TEST button for several seconds, the Red alarm LED and the LEARN-IN (red and green)

LED will ash, then the smoke alarm sounds. It shows that the smoke alarm is in working condition

(see Figure).

9V battery

1.5V x 3

battery

Horn

LEARN-IN LED

(Red or Green)

Alarm LED

(Red)

Test button LEARN-IN

button

• LEARN-IN

SET the MAIN detector/Assistant detector

1. After TESTING, please LEARN-IN the wireless online smoke alarms into a system. Press the

LEARN-IN button each time, the LEARN-IN LED changes in from red to green.

2. MAIN Detector: ensure the LED (main detector) of the LEARN-IN button is GREEN.

3. ASSISTANT Detector: ensure that the LED of the others (assistant detectors) are RED.

4. LEARN-IN Operation: Press the test button of the MAIN detector for several seconds in order to send

out the signal to the assistant detectors; in this case the RED alarm LED ashes and the detector

sounds, while the assistant detectors receive the signal and sound together. Then press the test

button on each assistant detector for several seconds in order to send out the signal to the MAIN

detector. The MAIN detector receives the signal and sounds the alarm.

• INSTALLATION

1. Use supplied screws to install the smoke alarm according to the Figures below.

2. Use the two screws (supplied) to x the mounting plate at the ceiling.

3. Adjust the hook of the mounting plate with the hole of the detector and turn counter-clockwise.

9V battery

installation

1.5V battery

installation

Screw

hole

Screw hole

Hole Hole Hook

Hook

Français Nederlands Italiano Español Magyar Suomi Svenska Česky Română Ελληνικά

DeutschEnglish

• Technical Parameters

Operating voltage: DC9V (smoke testing)

DC4.5V (transmission/Receiver: 3 x 1.5V battery)

Current: DC9V average stand-by current ≤10uA

DC9V average alarm current ≤ 20mA

DC4.5V average working current ≤120 uA

Alarm volume: 85dB/3m

Alarm LED: Red LED

LEARN-IN LED: Red/Green LED

Frequency: 433.92MHz

Transmission/Receiver distance: ≤60 m

Operating temperature: -10°C~40°C

• Points for attention:

1. No replaceable parts inside. Only battery is replaceable.

2. Do not use the product in the humid, dusty and smoky environment.

3. When the battery reaches a low energy level, the detector will sound about every 45 seconds to

indicate that the battery must be replaced.

4. Please test the smoke alarm weekly.

• Quality Guarantee:

1. This product is guaranteed for two years by the manufacturer.

2. Repair by third parties or improper operation of the product are excluded from the guarantee.

Declaration of conformity

We,

Nedis B.V., De Tweeling 28, 5215MC ’s-Hertogenbosch, The Netherlands

Tel.: 0031 73 599 1055, Email: info@nedis.com

Declare that product:

Brand: HQ / SEC-SA301RF

Model: KD-101LD

Description: Optical Wireless Smoke alarm

Is in conformity with the following standards:

EN 14604: 2005, EN 300 220-2 V2.1.2, EN 301 489-01 V1.6.1, EN 301 489-03 V1.4.1

And complies with the requirements of the European Union Directives 89/106/EEC and 1999/5/EC.

‘s-Hertogenbosch, 01-09-2009

Mrs. J. Gilad

Purchase director

Product specificaties

Merk:	HQ
Categorie:	Rookmelder
Model:	SEC-SA301RF
Kleur van het product:	Wit
Gewicht verpakking:	334 g
Stroombron:	Batterij/Accu
Connectiviteitstechnologie:	Draadloos
Afmetingen verpakking (BxDxH):	135 x 190 x 60 mm
Ondersteund aantal accu's/batterijen:	4
Certificering:	EN 14604
Batterij bijna leeg-indicatie:	Ja
Maximumbereik:	3 m
Detector type:	Optische detector
Koppelbaar:	Ja
Bandbreedte:	433.92 MHz
Bedrijfstemperatuur (T-T):	-10 - 40 °C
Alarm decibels:	85 dB