Honeywell ComfortTemp 4 HCE640 Handleiding

Honeywell Heater ComfortTemp 4 HCE640

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell ComfortTemp 4 HCE640 (16 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
IMPORTANT
SAFETY INSTRUCTIONS
WARNING – READ AND SAVE THESE OPERATING
AND SAFETY INSTRUCTIONS BEFORE USING THIS
HEATER. IF YOU DO NOT UNDERSTAND THESE
INSTRUCTIONS OR PRODUCT LABELS PLEASE
CALL OUR CUSTOMER REPRESENTATIVES AT
1-800-477-0457 FOR ASSISTANCE BEFORE USING
THIS PRODUCT.
Warning – Failure to follow any of these safety
instructions could result in fire, injury, or death.
YOUR RESPONSIBILITIES
Electrical appliances may expose people to hazards
that can cause severe injury as well as death. The use
of electrical products may create hazards that include,
but are not limited to, injury, fire, electric shock and
electrical system damage. These instructions are
intended to provide you with the information you need
to use the product correctly and to avoid such hazards.
When using electrical appliances, basic precautions
should always be followed to reduce risk of fire,
electric shock, and injury to persons including the
following:
1. Warning – Read all instructions before using
this heater.
2. Warning – This heater is hot when in use. To
avoid burns, let bare skin touch hot DO NOT
surfaces. Use handles when moving this heater.
Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, and curtains at
least 3 feet (0.9 m) from the front of the heater
and keep them away from all sides of the heater.
3. Warning – Extreme caution is necessary when
any heater is used by or near children or invalids,
and whenever the heater is left operating and
unattended.
4. WarningALWAYS unplug heater when not
in use.
5. Warning DO NOT operate any heater with
a damaged cord or plug, any heater that
malfunctions, or any heater that has been
dropped or damaged in any manner. Discard
heater or return heater to authorized service
facility for examination and/or repair.
6. Warning – For residential use only.
7. WarningDO NOT use outdoors.
8. Warning – This heater is not intended for use
in bathrooms, laundry areas, and similar indoor
locations. DO NOT locate heater where it may
fall into a bathtub or other water container.
9. WarningDO NOT run cord under carpeting.
DO NOT cover cord with throw rugs, runners,
or similar coverings. route cord under DO NOT
furniture or appliances. Arrange cord away from
traffic areas and where it will not be a tripping
hazard.
10. Warning – This appliance has a polarized plug
(one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
11. Warning – This heater draws 12.5 amps during
operation. To prevent overloading a circuit,
DO NOT plug the heater into a circuit that already
has other appliances working.
COMFORTTEMP 4
CERAMIC HEATER
HCE640, HCE643, HCE645 SERIES
2
ABOUT CERAMIC TECHNOLOGY
12. Warning – It is normal for the plug to feel warm
to the touch; however, a loose fit between the
AC outlet (receptacle) and plug may cause
overheating and distortion of the plug. Contact a
qualified electrician to replace loose or worn outlet.
13. Warning – To disconnect the heater, first turn off
the product, then grip the plug body and pull it
from the wall outlet. pull by the cord.DO NOT
14. WarningDO NOT insert or allow foreign objects
to enter any ventilation or exhaust opening as
this may cause electric shock, fire, or damage
to the heater.
15. Warning – To prevent a possible fire, DO NOT
block air intakes or exhaust in any manner.
DO NOT use on soft surfaces, like a bed, or where
openings may become blocked.
16. WarningA heater has hot and arcing or
sparking parts inside. use it in areas DO NOT
where gasoline, paint or flammable liquids are
used or stored.
17. Warning Use this heater only as described in this
manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or
injury to persons.
18. WarningALWAYS plug heater directly into
a wall outlet/receptacle. use with an DO NOT
extension cord or relocatable power tap
(outlet/power strip).
19. NEVER Warning tamper with this product
or attempt to fix it. Any tampering with, or
modification of this product can result in serious
injury, death, or fire. open. Risk of electric DO NOT
shock. There are no user serviceable parts inside.
20. WarningDO NOT remove product labels
that contain warnings or safety instruction.
21. Caution – The output of this heater may vary
and its temperature may become intense enough
to burn exposed skin. Use of this heater is not
recommended for persons with reduced sensitivity
to heat or an inability to react to avoid burns.
22. Caution – Before cleaning, or storage, or when
not in use, turn the product’s controls to the OFF
position and unplug the heater from the electrical
outlet and allow to cool.
23. CautionPlace the heater on a firm, level, open
surface free from obstructions and at least 3 feet
(0.9 m) away from any combustible materials.
DO NOT use on an unstable surface such as
bedding or deep carpeting. Be sure the heater
is not in a position where it may be tripped over
by small children or pets.
24. Caution If your home has aluminum wiring
have a licensed electrician check your receptacle’s
connections. When using a 1500 watt heater,
aluminum wire connections can cause a safety issue.
25. SAVE THESE
INSTRUCTIONS
Ceramic heaters generate heat by passing electricity through heating elements embedded in ceramic plates.
In the Honeywell ComfortTemp™ 4 Ceramic Heater, air is drawn into the back of the heater by a fan, and then
pushed through the ceramic element and out the front of the heater to gently introduce warm air into the room.
This type of heating technology provides consistent, even heating.
For best heat output, place heater on the floor and allow it to run for 5-10 minutes.
3
SET UP
MOVING THE HEATER
The Honeywell ComfortTemp™ 4 Ceramic Heater requires no assembly. Simply unpack heater and save all
packaging materials for off-season storage.
Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) away from any
wall or combustible material.
use on an unstable surface such as bedding or deep carpeting.DO NOT
BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY CHILDREN OR PETS.
This heater is equipped with a Cool Touch handle for your convenience.
Turn off the heater.
Allow it to cool for ten minutes.
Unplug heater and move.
OPERATION
NOTE: NEVER LEAVE AN OPERATING HEATER
UNATTENDED
Plug the heater into a polarized 120V outlet.
DO NOT FORCE THE POLARIZED PLUG INTO
THE OUTLET; it will only fit one way.
With 90° oscillation, the Honeywell ComfortTemp
4 Ceramic Heater is versatile and designed to be
placed in the center of the room or closer to the wall
(at least 3 feet away) for maximum convection room
heating.
Turn heater on by pressing the Power Button ( ).
The Power Indicator will illuminate and the heater
will start in the highest level setting (Heat Blast).
The heater has two operational modes, which can be
chosen using the red switch on the back of the unit
(Fig. 2):
- Continuous heating ( ) – heater will run until it
is manually shut off.
- Auto ShutOff ( ) mode - heater will
automatically shut off after 8 hours each time that
you use the heater. This is a built-in safety feature
to help ensure the heater isn’t accidentally left on
for an extended period of time.
NOTE: See the SafeGuard® Auto ShutOff feature section for more information on this feature.
This heater comes pre-set from the factory with the Auto ShutOff mode engaged. When the unit is turned on, the
Auto ShutOff icon ( ) will be illuminated on the top of the controls. All features are functional while operating in
the Auto ShutOff mode.
Should you want the heater to automatically shut off after 8 hours, switch to Continuous heating by simply NOT
pressing the red switch on the back of the unit. Once selected, the Continuous heat icon ( ) will illuminate on
the top of the control panel.
Fig. 1
Power
Button
Heat
Levels
Continuous
Timer
Heat
Setting
Heat
Level
Indicator
Auto Shut-Off
Oscillate
NOTE: Controls/features will vary slightly by model
Fig. 2 Auto Shut-Off Continuous


Product specificaties

Merk: Honeywell
Categorie: Heater
Model: ComfortTemp 4 HCE640

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell ComfortTemp 4 HCE640 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Honeywell

Handleiding Heater

Nieuwste handleidingen voor Heater