Golden Lighting Duncan 3602-BA3 Handleiding

Bekijk gratis de handleiding van Golden Lighting Duncan 3602-BA3 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over Golden Lighting Duncan 3602-BA3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Assembly Instructions: (Duncan)3602-BA3

IMPORTANT:

•ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

•SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

•USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important

notes above. Shut off the power at the circuit breaker and

completelyremovetheoldxturefromthewall,includingtheold

mountingstrap.

Mountingbracket(B)maybeattachedtobackplate(G).Ifso,

use a screwdriver to remove screws (F). Place the screws aside

forfutureuse.Mountingbracket(B)containsseveralpairsof

threadedholes.Findthepairofholesthatmatchesthespacing

oftheholesonthejunctionboxandbackplate(G).Pullthe

housewiresthroughthecenterofmountingbracket(B).Place

mountingbracket(B)overthejunctionboxandsecuremounting

bracket(B)tothejunctionboxwithmountingscrews(D)anda

screwdriver.Besurethatthemountingbracketislevel.Tighten

the screws securely.

CONNECTING THE WIRES

Attachthexture’swirestothepowersupplywiresfromthe

junctionbox.Connectblacktoblack(orsmooth);whitetowhite

(orribbed);groundtoground(greenorcopper).Twisttheends

ofthewirepairstogether,thentwistonawireconnector.Make

surealltwistsareinthesamedirection.Ifthereisnogroundwire

(greenorcopper)fromthejunctionbox,locategroundscrew

(E)onmountingbracket(B)andwrapthexture’sgroundwire

aroundthegreengroundscrew(E).Useascrewdrivertosecure

groundscrew(E)ontothemountingbracket.Tuckallwires

neatlyintothejunctionbox.

FINISHING THE INSTALLATION

Placebackplate(G)overmountingbracket(B)sothattheholes

onthetopofbackplate(G)matchupwiththeholesinmounting

bracket (B). Thread screws (F) into the holes in the top of

backplate(G)andintotheholesinmountingbracket(B).Tighten

thescrewsuntilthebackplateofthextureissnugagainstthe

wall.

Slideshade(I)oversocket(H)andtwistsocketring(J)ontothe

threads of the socket to secure in place.

Installlightbulbsinaccordancewiththexture’sspecications.

Donotexceedthemaximumrecommendedwattage.

Your installation is now complete. Turn on the power and test the

xture.

BLACK

(Hot)

WHITE

(Neutral)

GREEN

(Ground)

HOUSE WIRES

SMOOTH

(Or Black)

FIXTURE WIRES

RIBBED

(Or White)

BARE COPPER

(Or Green)

For Customer Service, contact

the place of purchase to arrange

for replacement parts.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

GE

D

B

F

Junction Box

C

H

I

J

Product specificaties