Golden Lighting Duncan 3602-14 Handleiding

Bekijk gratis de handleiding van Golden Lighting Duncan 3602-14 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 31 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Golden Lighting Duncan 3602-14 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Assembly Instructions: (Duncan)3602-14

IMPORTANT:

•ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

•SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

•USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important

notes above. Shut off the power at the circuit breaker and

completelyremovetheoldxturefromtheceiling,includingthe

oldmountingstrap.

Fromthepartsbagremovethemountingstrapassembly.One

endofnipple(F)shouldbeattachedtomountingstrap(B)with

washerandhexnut(CandC1)inplace.Attachmountingstrap(B)

tothejunctionboxusingmountingscrews(D)andascrewdriver.

Tightensecurely.

CONNECTING THE WIRES

Haveanassistantsupportthexture’sweightwhilecompleting

thewiring.Cutawayexcesswire.Threadthexture’swires

throughcanopyloopandnipple.Attachthexture’swiresto

thepowersupplywiresfromthejunctionbox.Connectblack

to smooth/black/transparent (L) wire; white to ribbed/white/

transparent(N)wire;groundtoground(greenorcopper).Twist

theendsofthewirepairstogether,andthentwistonawire

connector. Make sure all twists are in the same direction. If there

isnogroundwire(greenorcopper)fromthejunctionbox,locate

groundscrew(E)onthemountingbracket/mountingstrapand

wrapthexture’sgroundwirearoundthegreengroundscrew(E).

Useascrewdrivertosecuregroundscrew(E)ontothemounting

bracket/mountingstrap.Tuckallwiresneatlyintothejunction

box.

FINISHING THE INSTALLATION

Unscrewscrews(L).Removediffuserandmetalring(KandM).

Avoidtouchingtheinsulationwithyourbarehands.Raisethetop

ofceilingpan(G)tomountingstrap(B).Positionnipple(F)sothat

itprotrudesthroughthecenterofceilingpan(G).Securexture

(G)tomountingstrap(A)bythreadingdecorativenut(H)onto

nipple(F).Tightensecurely.

Pushshade(I)uptoceilingpan(G).Twistscrew(A)intoceiling

pan(G).Secureinplacebytwistingshade(I)sothatthekey

holelocksontoscrew(A).Installlightbulbs(notprovided)in

accordancewiththexture’sspecications.Donotexceedthe

maximumwattage.

Placediffuser(K)intometalring(M).Raisemetalring(M)up

beneath shade (I) and twist screws (L) into each screw hole of

metalring(M).Twistuntilsecure.

Your installation is now complete. Turn on the power and test the

xture.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

For Customer Service, contact the

place of purchase.

Smooth / Black /

Transparent (L)

Black (Hot)

Ribbed / White /

Transparent (N)

Bare Copper / Transparent with

Green Interior / Green

White (Neutral)

Green

(Ground)

A

H

G

I

J

L

K

M

N

O

D

B

F

E

C

C1

Product specificaties