Gedore TBN 10 Handleiding
Pagina's 1 Schroefmachine
Bekijk de handleiding van Gedore TBN 10 gratis online of download de PDF. 13 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
Servicing Information
Regular servicing every year or 5000 cycles of your Torque Tool is important to ensure it
continues to perform correctly.
Safety & Maintenance
This Torque Tool is a precision instrument and should be used for its
intended purpose only
Only hold the tool using the handgrip
Always ensure that the tool is in correct alignment with the fastener
Torque tools should be regularly calibrated and inspected to ensure correctoperation
Ensure the tool is clean and free from oil, grease and water before use
Do not use extension bars to increase the leverage of the handle
Never dip into cleaning uid or petroleum
Instruction Part Number P16960 Issue 3
How to use and care for your TBNPresetBreaking
Torque Wrench
Tool Specication
Models: TBN2, 2 G, 10 & 10 G (Torque Range 0.4 –10 N.m)
Repeatability: +/-6% of Torque Setting
ISO 6789 Class: Type 2, Class A
Calibration Period: Every 12 Months or 5000 cycles (minimum)
Mechanism: Breaking -Incorrect tightening is Unlikely
EPA Compliant:
How to adjust your Torque Wrench
(1) To check setting:
Use a Torque Analyser.
(2) To adjust the torque setting:
Use a 5 mm hexagon key to remove the end cap.
Then use the same 5mm hexagon keyto turn the
torque adjuster.
(3)To increase torque:
Using the 5mmkey provided, rotate clockwise
until the correct torque is shown consistently
on the Analyser. (10 readings)
(3)To reduce torque:
When adjusting, always approach the required
torque from a lower setting.
To reduce the torque, rotate the hexagonal key
anti clockwisepass your setting, then increase
torque to the required value.
To set torque:
The adjustment mechanism locks
automatically when the hexagonal key is removed.
To use Torque Wrench:
The TBNWrench is designed for use withspecial endttings.
1
2
3
Product specificaties
| Merk: | Gedore |
| Categorie: | Schroefmachine |
| Model: | TBN 10 |
| Gewicht: | 130 g |
| Soort: | Mechanisch |
| Kleur handvat: | Zwart |
| Nauwkeurigheid: | 6 procent |
| Lengte: | 105 mm |
| Koppelbereik: | 1 - 10 Nm |
| Kleur steel: | Staal |
Heb je hulp nodig?
Als je hulp nodig hebt met Gedore TBN 10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroefmachine Gedore
Gedore RTU 170 Handleiding Gedore TSN 25 D Handleiding Gedore QSN 120 FH Handleiding Gedore TBN 2 Handleiding Gedore ATB 10 Handleiding Gedore Quickset Minor Metric FH Handleiding Gedore Minor FH Handleiding Gedore ATB 5 Handleiding
Alle Gedore Schroefmachine handleidingen
Populair in Schroefmachine
Handleiding Schroefmachine
Nieuwste handleidingen voor Schroefmachine
Cleco 24RAA11AL3 Handleiding Cleco 34RAA47AX3 Handleiding Cleco 34RAA37AX3 Handleiding Parkside PASSP 20-Li C4 Handleiding Parkside PBSPA 12 E4 Handleiding Parkside PPDSSA 12 A1 Handleiding Parkside PASD 4 C3 Handleiding Parkside PPBSSA 12 A1 Handleiding Parkside PTBSA 20-Li A1 Handleiding Parkside PBSAP 20-Li A1 Handleiding