GARDE 181TSLC38 Handleiding
GARDE
Snijmachine
181TSLC38
Lees hieronder de 📖 handleiding in het Nederlandse voor GARDE 181TSLC38 (1 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.7 sterren beoordeeld
Pagina 1/1
QUICK START GUIDE
TOMATO SLICERS
MODELS
181TSLC316 - 3/16" Slices
181TSLC732 - 7/32" Slices
181TSLC14 - 1/4" Slices
181TSLC38 - 3/8" Slices
SAFETY INSTRUCTIONS
CAUTION
Be careful when handling and operating the machine, as
the blades are very sharp. Always keep your hands away
from the blades.
PREPARATION
1. This unit comes fully assembled.
2. Place the unit on a sturdy work surface.
3. The guides for the pusher assembly located along the
sides of the cutting board need to be lubed regularly to
keep your slicer operating smoothly. Using a food grade
sanitary lube (such as 401PETROLGEL) will ensure you
get a clean slice every time.
OPERATION
1. Pull the handle toward you and place a tomato on the
slide board between the pusher plates and the blades.
2. Remove hands and ngers from the cutting area
and push the handle toward the blades with one
quick motion.
3. Remove the sliced tomato from the slide board
and repeat as necessary.
BLADE TENSION INSTRUCTIONS
1. Ensure that the blade holder assembly is rmly
mounted on the frame with the sharp side of the
blades toward the pusher assembly.
2. Be sure the hex head screws on the right side of the
blade holder are tight.
3. Tighten the hex head screws on the left end of the
blade holder until the blades “hum” when strummed
or plucked.
4. Check the blade tension each time the machine is used.
CLEANING
NOTE: Avoid using alkaline cleaners as they may dull the
nish and cause pitting.
1. Remove the thumb screws and the slide stop from the
pusher assembly. Pull the pusher off the end of the
slide board.
2. Remove the mounting screws from the slide board and
blade shield.
3. To totally disassemble the pusher assembly, remove
the acorn and hex nuts on the top of the stack and
carefully remove the pusher plates and spacers.
Remove the additional screws if you wish to
disassemble the guide plate.
4. To reassemble, reverse the procedure.
NOTE:
Always rinse the tomato slicer in cold or lukewarm
water after it has been washed in hot water.
Hot water makes the slide board expand which may
make it difcult to use the pusher assembly until
the slide board returns to room temperature.
NOTE: After reassembly, you must add tension back to
the blades.
REPLACEMENT PARTS
BLADE ASSEMBLIES
#181BLDTS316 #181BLDTS732 #181BLDTS14 #181BLDTS38
3/16" 7/32" 1/4" 3/8"
#181PTS316 3/16"
#181PTS732 7/32"
#181PTS14 1/4"
#181PTS38 3/8"
ADDITIONAL PARTS
#181TSCREW Thumb Screw
#181FT1 Feet (4)
08/2023
Product specificaties
| Merk: | GARDE |
| Categorie: | Snijmachine |
| Model: | 181TSLC38 |
Heb je hulp nodig?
Als je hulp nodig hebt met GARDE 181TSLC38 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine GARDE
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
7 Juli 2023
2 Juli 2023
26 Juni 2023
26 Juni 2023
Handleiding Snijmachine
- Snijmachine Bron-Coucke
- Snijmachine Hendi
- Snijmachine Melissa
- Snijmachine Swan
- Snijmachine Ade
- Snijmachine Sammic
- Snijmachine Black And Decker
- Snijmachine Zelmer
- Snijmachine Ambiano
- Snijmachine Beem
- Snijmachine Enkho
- Snijmachine Nemco
- Snijmachine Graef
- Snijmachine Thane
- Snijmachine Backyard Pro
Nieuwste handleidingen voor Snijmachine
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025