GARDE 181WEDGE8 Handleiding
GARDE
Snijmachine
181WEDGE8
Bekijk gratis de handleiding van GARDE 181WEDGE8 (4 pagina’s), behorend tot de categorie Snijmachine. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.8 sterren uit 4.5 reviews. Heb je een vraag over GARDE 181WEDGE8 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
4 Section
Item #181WEDGE4
6 Section
Item #181WEDGE6
8 Section
Item #181WEDGE8
8 Section
Apple Corer
Item #181CORE8
10 Section
Item #181WEDGE10
12/2021
Fruit & Vegetable Wedgers
Safety Instrucons
Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands
away from the blades.
Preparaon
1) This unit comes fully assembled.
2) Place the unit on a sturdy work surface.
Operaon
1) Li the push block and place the produce on the blade assembly.
2) Remove hands and ngers from the cung area and bring the push block down to force the produce
through the blades.
3) Clean the machine aer wedging is completed using the instrucons below.
Cleaning and Maintenance
1) Li the pusher block from the guide rods.
2) Remove the screws from the boom of the frame to release the blade assembly.
3) Wash the push block, blade assembly, and frame thoroughly.
4) To re-assemble, reverse the procedure.
5) When needed, lubricate the guide rods with mineral oil, food grade grease, or paran.
Do not use cooking oil.
Please read and comply with the instrucons listed on this document. To get the best service life
and performance from your machine, clean it thoroughly before and aer each use by following the
instrucons listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
4 Secon Blade Assembly
#181WBA4
10 Secon Blade Assembly
#181WBA10
Knob
#181VWKNOB
Feet
#181FT1
4/8 Secon Push Block
#181WPB48
10 Secon Push Block
#181WPB10
6 Secon Push Block
#181WPB6
8 Secon Blade Assembly
#181WBA8
8 Secon Corer Blade Assembly
#181CBA8
6 Secon Blade Assembly
#181WBA6
White Bushing
#181BUSHING3
Product specificaties
| Merk: | GARDE |
| Categorie: | Snijmachine |
| Model: | 181WEDGE8 |
Heb je hulp nodig?
Als je hulp nodig hebt met GARDE 181WEDGE8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine GARDE
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
Handleiding Snijmachine
- Dremel
- ETA
- Ozito
- Cecotec
- Coline
- Pro-Cut
- Prince Castle
- Emga
- Ovela
- Cuisinart
- Skil
- Concept
- Quigg
- Ufesa
- Siemens
Nieuwste handleidingen voor Snijmachine
22 Juli 2025
14 Juli 2025
7 Juli 2025
6 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025