GARDE 181CHKSLC12 Handleiding
GARDE
Snijmachine
181CHKSLC12
Lees hieronder de ๐ handleiding in het Nederlandse voor GARDE 181CHKSLC12 (4 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 5 personen en werd door 3 gebruikers gemiddeld met 4.6 sterren beoordeeld
Pagina 1/4
USER MANUAL
1/2"
Item #181CHKSLC12
3/8"
Item #181CHKSLC38
1/4"
Item #181CHKSLC14
09/2020
Chicken Slicers
Safety Instruc๎พons
Be careful when handling and opera๎พng the machine, as the blades are very sharp. Always keep your hands
away from the blades.
Cau๎พon: This product should only be used to cut cooked, lean meats.
Prepara๎พon
1) Place the unit on a sturdy work surface.
2) Hold the handle in the upright posi๎พon and carefully place the product on the blades.
3) Remove hand and ๎ngers from the cu๎พฎng area.
4) Slowly and ๎rmly bring handle down and force the product through the blades with the push plate.
Cleaning and Maintenance
1) Remove ring pin and the handle from main frame.
2) Carefully remove blade assembly from main frame.
3) Thoroughly clean all components with water and soap, or a mild detergent.
4) Dry all components and reassemble by following the steps above in reverse order.
Please read and comply with the instruc๎พons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and a๎er each use by following the instruc๎พons
listed below. Minimize the use of alkaline cleaners as they may dull the ๎nish and cause pi๎พฎng.
USER MANUAL
Replacement Parts
USER MANUAL
๎ฌ๎ฐ๎จ๎๎๎๎๎ถ๎๎๎๎ฉด๎ญ๎ผ๎ป
#181CHKP12
๎ฌ๎ฐ๎ช๎๎๎๎๎ถ๎๎๎๎ฉด๎ญ๎ผ๎ป
#181CHKP14
๎ฌ๎ฐ๎ฎ๎๎๎๎๎ถ๎๎๎๎ฉด๎ญ๎ผ๎ป
#181CHKP38
๎๎๎ฉถ๎๎๎๎ฉด๎ญ๎ท๎ป๎๎๎ถ๎ถ๎ป๎ฌ๎ฐ๎ฉด๎
๎ฒ๎๎ฉถ๎๎๎๎๎๎๎๎๎ฉถ
๎๎๎๎๎๎๎ฉด๎ญ๎ท๎ป๎๎๎ถ๎ถ๎ป๎ฌ๎ฐ๎ฉด๎
๎ฒ๎๎ฉถ๎๎๎๎๎๎๎๎๎
๎๎๎๎๎๎๎ฉด๎ญ๎ท๎ป๎๎๎ถ๎ถ๎ป๎ฌ๎ฐ๎ฉด๎
๎ฒ๎๎ฉถ๎๎๎๎๎๎๎๎๎
Ring Pin
#181RINGPIN
๎ข๎๎ฑ๎พ๎ฏ๎ญ๎๎๎ฏ๎ฏ๎ผ
๎ฒ๎๎ฉถ๎๎ข๎ฆ๎๎๎ฆ๎๎๎ค
๎ก๎๎ฐ๎ฐ๎ป๎ต๎๎๎ฏ๎ฏ๎ผ
๎ฒ๎๎ฉถ๎๎๎ข๎๎๎๎๎๎๎ค
Product specificaties
| Merk: | GARDE |
| Categorie: | Snijmachine |
| Model: | 181CHKSLC12 |
Heb je hulp nodig?
Als je hulp nodig hebt met GARDE 181CHKSLC12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine GARDE
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
Handleiding Snijmachine
- Snijmachine Wolfcraft
- Snijmachine Saro
- Snijmachine Bomann
- Snijmachine Fritel
- Snijmachine Eurel
- Snijmachine Parkside
- Snijmachine RIDGID
- Snijmachine Ices
- Snijmachine Proline
- Snijmachine Graef
- Snijmachine Clatronic
- Snijmachine Powerplus
- Snijmachine Nevir
- Snijmachine Genius
- Snijmachine Prowork
Nieuwste handleidingen voor Snijmachine
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025