Gamber-Johnson 7160-0907 Handleiding

Gamber-Johnson Cradle/docking station 7160-0907

Lees hieronder de 📖 handleiding in het Nederlandse voor Gamber-Johnson 7160-0907 (6 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

Rev. C INST-759

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

PANASONIC CF33 TABLET DOCKING STATION

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

instructions on features, set-up, and operation of the computer, please refer to the

Product

This docking station is designed to be used with a variety of Gamber-Johnson

Revision

mounting systems. Installation instructions for other Gamber-Johnson products are

Printing Spec:

provided with each individual product.

7160-0907

PS-001

Form

manual provided by Panasonic with the computer.

INSTALLATION INSTRUCTIONS

This instruction sheet is for the Panasonic CF33 Tablet docking station only. For

This instruction sheet is for the following products:

Item No. 7160-0907-00 FULL PCB, No RF (External Power Supply sold separately)

Item No. 7160-0907-02 FULL PCB, Dual RF, Right (External Power Supply sold separately)

Item No. 7160-0907-06 LITE PCB, NO RF (External Power Supply sold separately)

Item No. 7160-0907-07 LITE PCB, Dual RF (External Power Supply sold separately)

Panasonic recommends using a Lind Auto Adapter to power the docking station. It can be ordered from

Gamber-Johnson (Item No. 14103 for bare wire leads, Item No. 14650 for mountable case and cigarette

plug lead).

1 / 6

IMPORTANT SAFETY INFORMATION FOR INSTALLERS

Safety is dependent on the proper installation and servicing of this docking station. It is

important to read and follow all instructions before installing this product.

To properly install a Gamber-Johnson docking station you must have a good

understanding of automotive electrical procedures and systems, along with proficiency

in the installation and service of aftermarket vehicle equipment.

There are no adjustments required at any time of the electrical components within the

docking station. Opening the docking station will void the product warranty.

During Installation:

DO NOT connect this docking station to the vehicle battery until:

All other electrical connections are made1.

Mounting of all components is complete2.

Verification that no shorts exist in the entire system3.

DO NOT install equipment or route wires or cords in the deployment path of any air bag.

When drilling into the vehicle, DO make sure that both sides of the surface are clear of

anything that could be damaged.

CAUTION: If wiring is shorted to the frame, high current conductors can cause

hazardous sparks resulting in electrical fires or flying molten metal.

After installation:

Test the docking station to ensure that it is working properly.

File these instructions in a safe place and refer to them when performing maintenance

or re-installing.

WARNING: Failure to follow all safety precautions and instructions may result in property

damage, serious injury, or death.

PRE-INSTALLATION RECOMMENDATIONS

Conduct a "Bench Test"

Gamber-Johnson strongly advises a "bench test" be conducted to verify all

electronic and software issues are resolved prior to installation:

Make sure the computer is operational by itself.1.

Insert computer into the docking station and verify that the computer is 2.

operating in the dock.

Interconnect entire assembly and verify start-up of all components, 3.

including other equipment (printers, modems, scanners, etc.)

Gamber-Johnson recommends positioning of all mounts and equipment in the

vehicle prior to the actual install to verify that mounting locations are safe and

practical.

2 / 6

External ANT

Switch

Part# / Serial# Label

PANASONIC CF33 TABLET DOCK FEATURE IDENTIFICATION

3 / 6

Lock

Latch

Connector Guard

(2) USB 2.0

VESA 75MM

Hole Pattern

Power Input

15.6 Vdc

RF - ANT 1

RF - ANT 2

(2) Ethernet (RJ45)

(2) USB 3.0

(2) USB 2.0

Serial (RS232)

VGA

HDMI

Cable Tie Slot

(for power)

Cable Tie Slots NOTE: "LITE" version dock will not have VGA and HDMI ports

Warranty Label

Panasonic Notation: Ch1 (Ext-Ant1)

Panasonic Notation: Ch2 (Ext-Ant2)

Product specificaties

Merk:	Gamber-Johnson
Categorie:	Cradle/docking station
Model:	7160-0907
Kleur van het product:	Zwart
Gewicht:	1880 g
Breedte:	282 mm
Diepte:	296.4 mm
Hoogte:	77.2 mm
Bluetooth:	Nee
Ethernet LAN:	Ja
Type stroombron:	DC
Aantal USB 2.0-poorten:	4
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
HDMI-connector type:	Volledige grootte
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	Toughbook, MIL-STD-810G, RoHS, FCC, CE
Aansluiting voor netstroomadapter:	Ja
HDMI:	Ja
VESA-montage:	Ja
Merkcompatibiliteit:	Panasonic
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Compatibiliteit:	Toughbook 33
Montage interface compatibiliteit (max):	75 x 75 mm
Seriële poort(en):	1
Standaard apparaat type:	Tablet
AC-ingangsspanning:	15.6 V