Furuno 1944CBB Handleiding
Furuno
Scheepsradar
1944CBB
Lees hieronder de 📖 handleiding in het Nederlandse voor Furuno 1944CBB (223 pagina's) in de categorie Scheepsradar. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/223
Your Local Agent/Dealer
9-52 Ashihara-cho,
Nishinomiya 662-8580, JAPAN
Telephone : +81-(0)798-65-2111
Fax : +81-(0)798-65-4200
Marine Radar
MODEL 1824C-BB/
1834C-BB/1934C-BB/
1944C-BB/1954C-BB
OPERATOR'S MANUAL
http://www.furuno.co.jp/
FIRST EDITION : JAN. 2005
C
All rights reserved. Printed in Japan
( DAMI ) M1804C-BB, GD1920C-BB
Pub. No. OME-35490
(Elemental Chlorine Free)
The paper used in this manual
is
elemental chlorine free.
MODEL 1824C-BB/1834C-BB/1934C-BB/1944C-BB/1954C-BB, GD-1920C-BB OPERATOR'S MANUAL
Color Video Plotter
GD-1920C-BB
VX2
i
SAFETY INSTRUCTIONS
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
Turn off the radar power
switch before servicing the
antenna unit. Post a warn-
ing sign near the switch
indicating it should not be
turned on while the antenna
unit is being serviced.
Prevent the potential risk of
being struck by the rotating
antenna and exposure to
RF radiation hazard.
Wear a safety belt and hard
hat when working on the
antenna unit.
Serious injury or death can
result if someone falls from
the radar antenna mast.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
Turn off the power immediately if water
leaks into the equipment or the equip-
ment is emitting smoke or fire.
Continued use of the equipment can cause
fire or electrical shock.
Use the proper fuse.
Fuse rating is shown on the power cable.
Use of a wrong fuse can result in damage
to the equipment.
Keep heater away from equipment.
Heat can alter equipment shape and melt
the power cord, which can cause fire or
electrical shock.
A warning label is attached to the
equipment. Do not remove the label.
If the label is missing or damaged,
contact a FURUNO agent or dealer.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Name: Warning Label (1)
Type: 86-003-1011-0
Code No.: 100-236-230
WARNING
Radio Frequency
Radiation Hazard
The radar antenna emits electromagnetic
radio frequency (RF) energy which can be
harmful, particularly to your eyes. Never
look directly into the antenna aperture from
a close distance while the radar is in
operation or expose yourself to the trans-
mitting antenna at a close distance.
Distances at which RF radiation levels of
100 and 10 W/m2 exist are given in the
table below.
Note: If the antenna unit is installed at a
close distance in front of the wheel house,
your administration may require halt of
transmission within a certain sector of
antenna revolution. This is possible - Ask
your FURUNO representative or dealer to
provide this feature.
MODEL Distance to
100 W/m
2
point
Distance to
10 W/m
2
point
MODEL
1834C-BB Nil Worst case
1.80 m
MODEL
1934C-BB
MODEL
1944C-BB
Worst case
0.20 m Worst case
3.00 m
Nil Worst case
2.50 m
MODEL
1954C-
BB
Nil Worst case
2.50 m
Worst case
2.30 m
XN-12A
XN-13A
MODEL
1824C-BB Nil Worst case
0.50 m
WarningLabel
ii
TABLE OF CONTENTS
FOREWORD ....................................vi
SYSTEM CONFIGURATIONS .......viii
1. OPERATIONAL OVERVIEW.. 1-1
1.1 Operating Controls..........................1-1
1.1.1 Control unit ..........................1-1
1.2 Inserting a Chart Card....................1-3
1.3 Turning the Unit On/Off...................1-4
1.4 Adjusting Hue, Panel Illumination...1-5
1.5 Selecting a Display.........................1-6
1.5.1 Display modes.....................1-6
1.5.2 Selecting a display...............1-7
1.5.3 Switching control in
combination and overlay
screens ................................1-8
1.5.4 Selecting image source.......1-9
1.6 Trackball, Cursor...........................1-10
1.7 Entering the MOB Mark,
Setting MOB as Destination..................1-11
1.8 Data Boxes ...................................1-12
1.8.1 Showing, hiding data boxes
with soft key.......................1-12
1.8.2 Rearranging data boxes ....1-12
1.8.3 Temporarily erasing a
data box.............................1-12
1.9 Function Keys...............................1-13
1.10 Simulation Display........................1-14
2. RADAR OPERATION ............. 2-1
2.1 Radar Display.................................2-1
2.2 Transmitting, Stand-by....................2-1
2.3 Tuning.............................................2-2
2.4 Adjusting the Gain ..........................2-2
2.5 Reducing Sea Clutter .....................2-3
2.5.1 How the A/C SEA works......2-3
2.5.2 Adjusting the A/C SEA.........2-4
2.6 Reducing Precipitation Clutter........2-4
2.6.1 Adjusting the A/C RAIN .......2-4
2.7 Range Scale...................................2-5
2.8 Pulselength.....................................2-5
2.9 Presentation Mode..........................2-6
2.9.1 Selecting a presentation
mode....................................2-6
2.9.2 Description of presentation
modes..................................2-7
2.10 Measuring the Range .....................2-8
2.10.1 Measuring range by
range rings...........................2-8
2.10.2 Measuring range by cursor..2-8
2.10.3 Measuring range by VRM....2-9
2.10.4 Various VRM operations......2-9
2.11 Measuring the Bearing..................2-10
2.11.1 Measuring bearing by cursor....
........................................2-10
2.11.2 Measuring bearing by EBL.......
........................................2-10
2.11.3 Various EBL operations .....2-10
2.12 Erasing the Heading Line,
North Marker.................................2-11
2.13 Reducing Noise Interference........2-11
2.14 Rejecting Radar Interference........2-11
2.15 Zoom.............................................2-12
2.15.1 Zooming radar targets .......2-12
2.15.2 Zooming ARP, TTM targets.......
........................................2-13
2.16 Shifting the Picture........................2-14
2.16.1 Manual shift........................2-14
2.16.2 Automatic shift...................2-14
2.17 Using the Offset EBL....................2-15
2.17.1 Predicting collision course.2-15
2.17.2 Measuring range & bearing
between two targets...........2-16
2.18 Echo Trails....................................2-17
2.18.1 Trail time ............................2-17
2.18.2 Starting echo trails .............2-18
2.18.3 Trail gradation....................2-18
2.18.4 Trail color ...........................2-18
2.18.5 Echo trail mode..................2-19
2.19 Echo Stretch..................................2-19
2.20 Echo Averaging.............................2-20
2.21 Outputting TLL Data......................2-21
Product specificaties
| Merk: | Furuno |
| Categorie: | Scheepsradar |
| Model: | 1944CBB |
Heb je hulp nodig?
Als je hulp nodig hebt met Furuno 1944CBB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Scheepsradar Furuno
19 Februari 2023
19 Februari 2023
19 Februari 2023
28 Mei 2023
22 Mei 2023
19 Februari 2023
19 Februari 2023
21 Mei 2023
20 Mei 2023
15 Mei 2023
Handleiding Scheepsradar
- Scheepsradar Garmin
- Scheepsradar Lowrance
- Scheepsradar Navman
- Scheepsradar Raymarine
- Scheepsradar Simrad
- Scheepsradar JRC
Nieuwste handleidingen voor Scheepsradar
14 Augustus 2023
2 Juli 2023
30 April 2023
25 Maart 2023
25 Maart 2023
25 Maart 2023
28 Mei 2023
25 Maart 2023
24 Mei 2023
23 Mei 2023