Full Boar FBDWS-6100U Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Full Boar FBDWS-6100U (9 pagina's) in de categorie Polijstmachine. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
WARNING: Read all safety warnings and instructions before use. Failure
to follow the warnings and instructions may result in electric shock, re and/or
serious injury. Save these instructions for future reference.
02/17
DRYWALL
SANDER KIT
INSTRUCTION MANUAL
• 600W MOTOR
• PIVOTING SANDING HEAD
• HOOK & LOOP SYSTEM
• 6 SANDING SHEETS &
KIT BOX INCLUDED
2
Voltage: 230-240V ~ 50Hz
Power: 600W
Sanding Paper Size: Ø225mm
Paper Fitment: Hook & Loop
No Load Speed: 600-1500/min
Weight (Tool Only): 3.2kg
SPECIFICATIONS - MODEL NO. FBDWS-6100U
KNOW YOUR PRODUCT
1. Pivoting head
2. Extraction hose
3. Motor housing
4. Collapsible handle
5. Variable speed control
6. Lock-on button
7. Soft grip main handle
8. Adjustable rear handle
9. Sanding head
10. Extension handle lock
11. Extraction hose lock
12. Extraction hose
1
2 3
4
5
6
7
12
11
10
9
8
4
Congratulations on purchasing a Full Boar drywall sander kit.
It will make quick work of sanding plasterboards to achieve a
smooth nish, ready for paint.
Read and understand the instruction manual before operating
the demolition hammer. Failure to do so could result in
personal injury or equipment damage.
INTRODUCTION
WARNING! When using mains-powered tools, basic safety precautions, including the
following, should always be followed to reduce risk of re, electric shock, personal injury
and material damage.
Read the whole manual carefully, and make sure you know how to switch the tool off in an emergency,
before operating the tool. Save these instructions and other documents supplied with this tool for
future reference. The manufacturer cannot accept any liability for damage or accidents which arise
due to a failure to follow these instructions and the safety information.
Before you connect the equipment to the mains supply make sure that the data on the rating plate is
identical to the mains data.
This tool is double insulated therefore no earth wire is required.
The power supply for this product should be protected by a residual current device (rated at 30mA or
less). A residual current device reduces the risk of electric shock.
If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord
available through the service organisation.
Note: Double insulation does not take the place of normal safety precautions when operating this
tool. The insulation system is for added protection against injury resulting from a possible electrical
insulation failure within the tool.
Using an extension lead
Always use an approved extension lead suitable for the power input of this tool. Before use, inspect
the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or
defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead
not suitable for the power input of the tool or which is damaged or defective may result in a risk of re
and electric shock.
ELECTRICAL SAFETY


Product specificaties

Merk: Full Boar
Categorie: Polijstmachine
Model: FBDWS-6100U

Heb je hulp nodig?

Als je hulp nodig hebt met Full Boar FBDWS-6100U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden