Flyzone Extra 300 SX Handleiding

Flyzone Radiografisch bestuurbaar speelgoed Extra 300 SX

Lees hieronder de 📖 handleiding in het Nederlandse voor Flyzone Extra 300 SX (12 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

SPECIFICATIONS

Wingspan: 41.5 in

[1055 mm]

Wing

Area:

297 in2

[19.2 dm2]

Weight: 28 – 31 oz

[795 – 880 g]

Wing

Loading:

13.6 – 15 oz/ft2

[42 – 46 g/dm2]

Length: 34.5 in

[875 mm]

Radio: 4 – 5-channel

(required)

READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT

INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.

WARRANTY

Hobbico guarantees this kit to be free from defects in both

material and workmanship at the date of purchase. This

warranty does not cover any component parts damaged by use

or modication. In no case shall Hobbico’s liability exceed the

original cost of the purchased kit. Further, Hobbico reserves

the right to change or modify this warranty without notice.

In that Hobbico has no control over the nal assembly or

material used for nal assembly, no liability shall be assumed nor

accepted for any damage resulting from the use by the user of

the nal user-assembled product. By the act of using the

user-assembled product, the user accepts all resulting liability.

If the buyer is not prepared to accept the liability associated

with the use of this product, the buyer is advised to return

this kit immediately in new and unused condition to the

place of purchase.

To make a warranty claim send the defective part or item to

Hobby Services at the address below:

Hobby Services

3002 N. Apollo Dr. Suite 1

Champaign IL 61822 USA

Include a letter stating your name, return shipping address, as

much contact information as possible (daytime telephone

number, fax number, e-mail address), a detailed description of

the problem and a photocopy of the purchase receipt. Upon

receipt of the package the problem will be evaluated as quickly

as possible.

INSTRUCTION MANUAL

™

INTRODUCTION

Thank you for purchasing the Flyzone Extra 300SX. The

Extra was originally intended as a 3D-capable platform,

but because of its power-to-weight ratio and well-

mannered  ight characteristics, the Extra is also a great

sport  yer for average pilots when the control throws are

set to low or high rates.

For the latest technical updates or manual

corrections scan the QR code, or visit the

Flyzone web site at www. yzoneplanes.

com. Click the icon at the top airplane

of the page, then select the Extra 300SX

when the airplane page opens. A “Tech

Notice” box indicates corrected or

updated technical information.

ADDITIONAL ITEMS REQUIRED

Radio System

The Extra 300 can become airborne with any 4-channel

radio system, but to take advantage of its sport  ying

and/or 3D capabilities a modern computer radio with

standard features such as a timer, channel mixing, dual

rates and exponentials is required. The Tactic TTX650 or

TTX850 are both viable options that  t this criteria:

❑ Tactic TTX 650 6-channel SLT computer transmitter

(TACJ2650)

❑ Tactic TTX 850 8-channel SLT computer transmitter

(TACJ2850)

❑ Tactic TR624 6-Channel SLT Receiver (TACL0624)

❑ Batteries for transmitter: Hobbico HydriMax

NiMH 4-Cell 4.8V 2000mAh Flat AA receiver pack

(HCAM6321) Duratrax Onyx AA Alkaline Battery OR

(4-pack, DTXP4704)

LiPo Battery

The Extra was primarily designed as a 3D-capable aircraft

with a 3S 1800mAh LiPo. A 3S 2200mAh LiPo is also

suitable, but the additional weight of a heavier battery may

detract from its 3D performance slightly. In any case, if

you start experimenting with batteries and propellers, be

certain you don’t exceed the ESC’s maximum 30A rating.

❑ 3S 11.1V 1800mAh 30C LiPo (GPMP0855)

❑ 3S 11.1V 2200mAh 30C LiPo (GPMP0861)

❑ For additional batteries, adhesive-back hook-&-loop

Velcro is also recommended (GPMQ4480)

LiPo Charger

The bare minimums to look for in a charger are LiPo

balancing and the ability to charge at a minimum rate of

1C. An LED readout and AC capability are also convenient

features. The Great Planes Triton EQ AC/DC charger meets

all the above:

❑ GPMM3155 Great Planes ElectriFly Triton EQ AC/DC

Charger

ORDERING REPLACEMENT PARTS

Before starting to build, inspect the parts to make sure they

are of acceptable quality. If any parts are missing or are not

of acceptable quality, or if you need assistance with assembly,

contact Product Support.

Flyzone Product Support

3002 N. Apollo Drive, Suite 1 Ph: (217) 398-8970, ext. 5

Champaign, IL 61822 Fax: (217) 398-7721

E-mail:

airsupport@ yzoneplanes.com

REPLACEMENT PARTS LIST

ORDER NO.

FLZA6214

FLZA6620

FLZA6621

FLZA6622

FLZA6623

FLZA6624

FLZA6625

FLZA6626

FLZA6627

FLZA6628

FLZA6629

FLZA6630

FLZA6631

2005

GPMQ6600

DESCRIPTION

Propeller Adapter 4mm Shaft

Fuselage

Wing

Tail Surfaces

Cowl

Landing Gear

Landing Gear Covers

Wheel Pants

Canopy/Hatch

Spinner

Tail Wheel Assembly

Servo

Wing Bolt

35mm 1000kV 77g Outrunner Motor

10x4.5 Power Flow Propeller (2)

11 10

Fuselage

Foam fuselage

Foam canopy hatch w/pilot

Foam cowl

30A ESC

Motor

Elevator servo

Rudder servo

Control linkage (elevator, rudder

pushrods, screw-lock connectors,

90° pushrod connectors)

10 x 4.5 propeller

1-3/4" spinner

Propeller adapter assembl

Elevator joiner rod

Tail gear assembly

NOT PICTURED

Velcro

1.5mm hex key wrench

M3 set screw

M4 x 40 wing bolt

Wing

Foam wing

Aileron servos (2)

Servo extensions

Y-harness

Aileron linkage (pushrods, screw-lock

connectors, 90° pushrod connectors)

R&L horizontal stabilizer halves

R&L main landing gear wires

w/50mm wheels, retainers

R&L main landing gear covers

R&L wheel pants

Do not mount the propeller until instructed to do so.

To remove the canopy hatch, grasp the base around the

bottom and pull up to disengage the magnets.

❑ 1. Fit the square elevator joiner tube into one of the

elevators.

ASSEMBLY

Product specificaties

Merk:	Flyzone
Categorie:	Radiografisch bestuurbaar speelgoed
Model:	Extra 300 SX
Kleur van het product:	Silver, White
Gewicht:	880 g
Materiaal behuizing:	Schuim
Lengte:	875 mm
Constructietype:	Montagekit
Aantal kanalen:	4 kanalen
Type product:	Gevechtsvliegtuig
Type motor:	Borstelloos
Motorafmeting:	30-35-1000kV
Reproductie:	Ja
Spanwijdte:	1055 mm
Elektronische toerentalregeling (ESC):	Ja
Type elektronische toerentalregeling (ESC):	Borstelloos
Vleugeloppervlak:	1920 cm²
Aanbevolen batterij:	3S 11.1V 1800-2200mAh 30C LiPo