Fiamma Carry-Bike Pro Hymer - Dethleffs Handleiding

Fiamma Fietsendrager Carry-Bike Pro Hymer - Dethleffs

Lees hieronder de đź“– handleiding in het Nederlandse voor Fiamma Carry-Bike Pro Hymer - Dethleffs (8 pagina's) in de categorie Fietsendrager. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
PRO Hymer
M0\IS\98690-572 rev.C
®
®
FIAMMA S.p.A S. Rocco 56, 21010 Cardano al Campo - Italy
+(39) 0331709111 Fax +(39) 0331263777 www.fiamma.com
®
®
1
®
®
Montageanleitung - Instructions de montage -Installation instructions - Istruzioni di montaggio
Kg
60
MAX
++
PRODUCT
SERVICE
geprĂĽfte
Sicherheit
2
5x10
2
22
1
22
6x12 1
1
1
2
M6x55 2
M5x60 2
M6x50
M6x60
4
2
M6
M5
8
2
44
2
2
22
4
1
8
®
®
PRO
HYMER
PRO
HYMER
Verpackungsinhalt -
Contenu de l’emballage -
Package contents
Contenuto dell’imballo
2
®
®
60 cm
Montageanleitung
Instructions de montage
Installationinstructions
Istruzioni di montaggio
min. 80 cm
max. 150 cm
1
Vor dem Aufstellen des Produkts kontrol-
lieren Sie die stärkere Punkte auf die
Fahrzeugwand, um die Kupplung korrekt
zu befestigen.
Control the strongest points of vehicles’s
wall, where You can fix the hooking,
before installing the product.
Avant d’installer le produit, verifiez les
points plus robustes sur la paroi du véhi-
cule, oĂą fixer les crochets.
Prima di installare il prodotto, verificare
i punti piu’ robusti sulla parete del mez-
zo dove fissare gli agganci.
3
M5x60
5,2
2
®
®
3
A
BC
A
BC
D
1. Rimuovere il cappuccio di copertura (A)
con l’aiuto di un cacciavite.
A tal fine,inserire il cacciavite nella fessura
di drenaggio inferiore del cappuccio
e rimuoverlo mediante lievi sollevamenti.
2. Svitare i dadi (B).Inserire la staffa (C) sulle
viti e riavvitare i dadi (B)
(coppia di serraggio 2.3-2.7 Nm).
Fissare il guscio (D).La fessura di drenaggio
deve trovarsi posizionata in basso.
1. Die Abdeckkappen (A) mit Hilfe eines
Schraubendrehers herunter nehmen.
Hierzu den Schraubendreher in die unteren
Entw
Entw
ässerungsschlitze der Abdeckkappen
einfĂĽhren und diese durch leichtes Anheben
abziehen.
2. Die Sicherungsmuttern (B) abschrauben.Die
BĂĽgel (C) auf die Schrauben aufstecken und
mit den Sicherungsmuttern (B) wieder anschrauben
(Anzugsmoment 2,3-2,7 Nm).Die Schalen (D)
aufstecken.Die ässerungsschlitze der Schalen
mĂĽssen nach unten zeigen.
1. Enlever le cache protecteur (A) Ă  l'aide d'un tournevis
que vous utiliserez afin de faire levier sur le cache en
insérant la pointe du tournevis dans la cavité de
drainage qui se trouve au bas du cache.
2. DĂ©visser les boulons (B). Positionner la patte de
fixation (C) sur les vis et resserrer les boulons (B).
(Couple de serrage 2.3-2.7) Fixer la coque (D).
Remettre le cache en s'assurant que la cavité de
drainage soit bien en bas.
1. Remove the cover cap with a screwdriver. In order to
do it, put the screwdriver into the lower draining leak
of the cap and remove it with slight raisings.
2. Unscrew the nuts (B). Insert the bracket (C) and
screw the nuts (B).(Tightening couple 2.3-2.7 Nm).
Fix the shell (D). The draining leak must be low on
the cap
M6x60
M6
M6x50
SILICONE
0 6,50 6,5
GB Installation
DMontage
IMontaggio
FMontage


Product specificaties

Merk: Fiamma
Categorie: Fietsendrager
Model: Carry-Bike Pro Hymer - Dethleffs

Heb je hulp nodig?

Als je hulp nodig hebt met Fiamma Carry-Bike Pro Hymer - Dethleffs stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fietsendrager Fiamma

Handleiding Fietsendrager

Nieuwste handleidingen voor Fietsendrager