Festo VAOH-P15-H13 Handleiding

Bekijk gratis de handleiding van Festo VAOH-P15-H13 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.9 sterren uit 9 reviews. Heb je een vraag over Festo VAOH-P15-H13 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Translation of the original instructions

1Further applicable documents

All available documents for the product www.festo.com/pk.è

2Safety

2.1General safety instructions

–Take into consideration the ambient conditions at the location of use.

–Only use the product in original status without unauthorised modifications.

–Observe labelling on the product.

–Observe further applicable documents.

–Store the product in a cool, dry, UV-protected and corrosion-protected envir-

onment. Ensure that storage times are kept to a minimum.

2.2Intended use

The control element VAOH is intended for operation in the balancer kit YHBP.

2.3Training of skilled personnel

Installation, commissioning, maintenance and disassembly should only be con-

ducted by qualified personnel.

The skilled personnel must be familiar with the installation of pneumatic control

systems.

3Additional information

–Accessories www.festo.com/catalogue.è

–Spare parts www.festo.com/spareparts.è

4Service

Contact your regional Festo contact person if you have technical questions

èwww.festo.com.

5Product overview

5.1Function

By extending and retracting the handle on the control element, an

overpressure/partial vacuum is generated at pneumatic connection of the cyl-2

inder. Using a connected pressure regulator, it is possible to specify the speed of

cylinder movement at the balancer kit by means of the size of the pressure value.

The home position (mid-position) on the control element takes place by spring

return.

5.2Design

1

Mounting thread M8 (at both ends)

2

Pneumatic connection

3

Handle

4

Slot for proximity sensor

Fig. 1

6Assembly

•Mount control element at the intended position. The permissible tightening

torque is max. 10Nm.

The control element can be installed with the handle at the top or at the bot-

tom. For intuitive operation, the control element should always be aligned in

the movement direction of the balancer kit.

7Pneumatic installation

•Connect tubing between connection and the corresponding connection on2

the pressure regulator of the balancer kit.

8Malfunctions

8.1Troubleshooting

Fault descriptionCauseRemedy

Pressure at connection with2

handle in mid-position.

Leakage between air connec-

tion of control element and con-

nection of pressure regulator.

Check fittings and tubing are

tight.

Tab. 1

8.2Repair

Send the product to the Festo repair service for repair.

9Disposal

ENVIRONMENT!

Send the packaging and product for environmentally sound recycling in accord-

ance with the current regulations www.festo.com/sp.è

10Technical data

Type codeVAOH-P15-H13

Mounting positionAny

Mounting threadM8 (max. screw-in depth: 27mm)1

Max. lateral force[N]100

Position sensingFor proximity sensor

Operating pressure[bar]

£1

Pneumatic connectionG1/82

Ambient temperature[°C]–10…+80

Product weight[g]1350

Materials

CylinderAnodised aluminium

HandlePA6

Note on materialsContains materials that include LABS

1)

1) LABS = paint-wetting impairment substances

Tab. 2

8081648

Operator control element

VAOH-P15-H13

8081648

2018-02

[8081650]

Instructions| Operating

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Product specificaties