Fenix LD12 Handleiding

Fenix Zaklamp LD12

Lees hieronder de 📖 handleiding in het Nederlandse voor Fenix LD12 (3 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

Fenix LD12

Fenix LD12 is a widely used multifunctional flashlight. Offering 4 brightness levels and 2

different flashing functions, it can operate simply via the side mode switch. It makes a perfect

combination between different needs in brightness and runtime in various conditions. Featuring

the universal AA battery, compact and exquisite design, advanced constant brightness technology

and waterproofing to IPX- r8 Standard, LD12 must be you good to meet the needs in partner

various outdoor conditions and in the urgent condition.

Technical Parameters

General Mode

ANSI/FSC

Turbo

Low

Mid

High

Strobe

SOS

OUTPUT

115

LUMENS

115

LUMENS

RUNTIME

2h 9 min

97h

11h

4h 51 min

DISTANCE

80m

INTENSITY

1612cd

IMPACT

RESISTANT

WATERPROOF

IPX-8 2m ，underwater

EXTRA

FUNCTIONS

ACCESSORIES

Holster, body clip, lanyard - and spare o ring

◎ Cree XP-G (R5) LED with a lifespan of 50,000 hours

◎ Uses one 1.5V AA (Ni-MH, Alkaline ) battery

◎ 105mm (Length) x 21.5mm (Diameter)

◎ 54-gram weight (excluding battery and holster)

◎ Digitally regulated output - maintains constant brightness

◎ Reverse polarity protection, to protect from improper battery installation

◎ - - Anti roll, slip resistant body design

◎ Tactical tail cap switch with momentary-on function

◎ Side mode switch in the front

◎ Made of durable aircraft- grade aluminum

◎ Premium Type III hard- - anodized anti abrasive finish

◎ Toughened ultra-clear glass lens with anti coating-reflective

Notice: The above-mentioned parameters (tested by 2500mAh batteryNi-MH in Lab) are

approximate and may vary between flashlights, batteries and environments.

Operation Instruction

The tail cap switch is the power switch and the side button is the mode switch.

Press the tail cap switch lightly to activate the flashlight momentarily (without any press, it will be

off); Press the tail cap switch completely to turn on the flashlight and lock it. Another press can

turn it off.

When the flashlight is on, a single press on the side mode switch can select the brightness levels in

the order of Turbo Low Mid High Cycle;→ → → →

Press and hold the side mode switch for about one second to enter into the Strobe. It will flash in

the frequency of 6Hz/15Hz and transfer the frequency in every 2 seconds.

Press and hold the side mode switch for about 3 seconds to enter into the SOS.

Under the condition of Strobe or SOS, a single press on the side mode switch can return to the

general mode.

The flashlight can memorize the brightness levels in the general mode except the mode. When

turn it on, it will begin to work in the general mode.

Battery Specifications

Type

Dimensions

Nominal voltage

Usability

Ni- B MH attery

1.2V

Recommended

√

Alkaline B attery

1.5V

Usable

√

Non- rechargeable Battery

(Lithium)

1.5V

Usable

√

Rechargeable Battery

(Li- ion)

14500

3.7V

Banned

Battery Replacement

Unscrew the tail cap to put in the battery with the anode side (+) toward the light head, screw the

tail cap back on to test.

Usage and Maintenance

◎ Please don't disassemble the sealed head, doing so can cause damage to the flashlight and will

void the warranty.

◎ High-power light should use battery with high current discharge ability, we suggest using high

performance Ni-MH rechargeable battery, using alkaline battery will lower the runtime of

high- intensity light.

◎ Please use batteries of high quality, if the flashlight is not to be used for an extended period ,

remove the battery, or the flashlight could be damaged by electrolyte leakage or battery explosion.

◎ Due to the momentary-on tactical switch, perhaps the flashlight will activate unconsciously.

To avoid this case, please unscrew the tail cap for half a turn before put it into the bag.

◎ -The O ring may be worn out after using for a long time. If it happens, please replace the

O- ring with a new one to keep the flashlight properly sealed against water.

◎ Please clean the contacts of your light from time to time, especially if the light flickers or

doesn't light up. There may be several reasons for a flickering or not working light:

Reason A: The battery needs replacing.

Solution: Replace batteries (Please confirm the correct installation of anode and cathode).

Reason B: The threads, PCB board contact or other contacts are dirty.

Solution: Clean the contact points with an alcohol soaked cotton swab.

If the above methods don't work, please contact the distributors and refer to the warranty policy.

Product Warranty

We will replace products afflicted with manufacturing defects within 15 days of purchase and

repair a light free of charge within 24 months of purchase if problems develop with normal use; if

repair is required after 24 months from the date of purchase, we will charge for parts. The total

repair fee is dictated by the cost of the replaced materials.

Warranty Card Registration

We kindly suggest that you register your guarantee card on the official website of Fenixlight

Limited. You can get an extra six-month warranty period once you have successfully registered.

What's more, you could take part in the lottery of questionnaire at the same time.

Warning

LD12 is a high-intensity lighting device and capable the of causing eye damage, avoid shining

light directly into the eyes.

Product specificaties

Merk:	Fenix
Categorie:	Zaklamp
Model:	LD12
Kleur van het product:	Zwart
Aantal vermogenniveau's:	6
Gewicht:	54 g
Breedte:	21.5 mm
Diepte:	105 mm
Hoogte:	21.5 mm
Materiaal behuizing:	Aluminium
Aantal lampen:	- lampen
Soort lamp:	LED
Vermogen lamp:	- W
Internationale veiligheidscode (IP):	IPX8
Waterdicht:	Ja
Ondersteund aantal accu's/batterijen:	1
Levensduur accu/batterij:	100 uur
Aantal:	1
Lichtstroom:	125 lm
Levensduur lamp:	50000 uur
Type batterij:	AA
Type zaklamp:	Zaklamp
Lichtbundelafstand (max):	87 m