Felt Z series Disc Carbon Handleiding
Felt
Fiets E-bike
Z series Disc Carbon
Bekijk gratis de handleiding van Felt Z series Disc Carbon (8 pagina’s), behorend tot de categorie Fiets E-bike. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.9 sterren uit 17.5 reviews. Heb je een vraag over Felt Z series Disc Carbon of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8

ROAD DISC
TECHNICAL
MANUAL

1
INTRODUCTION CONTENTS
NOTE:
This manual is not intended as a
comprehensive use, service, repair, or
maintenance manual. Please see your dealer
for all service, maintenance, and repair.
Your dealer may also be able to refer you to
classes, clinics, or books regarding bicycle
use, service, repair, or maintenance.
CABLE ROUTING
Internal Fork Cable Routing ...................................................................... 2
Mechanical Cable Road Map .................................................................... 4
Di2 Cable Road Map ................................................................................ 5
Mechanical Routing .................................................................................. 6
Di2 Routing ..............................................................................................8
Internal Rear Brake Routing .................................................................... 10
CONTACT INFORMATION
Contact ................................................................................................... 11
Congratulations on purchasing a Felt disc brake equipped
road bike. As with all of our bikes and components, our aim is
to provide the rider with the best product and riding experience.
Read this manual supplement thoroughly, as it’s to
help you set your bike up correctly, and care for it.
For further information, visit:
FELTBICYCLES.COM

32
INTERNAL FORK
ROUTING
Understand that Felt Bicycles recommends
the brake cable is routed from the bottom
up. Begin by inserting the end of the
cable into the lower hole, feeding the
cable through the fork blade toward the
upper hole.
This section view shows the brake
cable entering the lower hole,
traveling up the fork blade and
out the upper hole.
Once the brake cable has exited the upper
cable hole as shown, slide the grommet
over the cable housing and press the rigid
shoulder into the cable hole to firmly hold
the brake cable in place.
The image to the left shows the front brake
cable (pink) successfully routed up through
the lower cable hole. The cable travels
through the fork blade, out of the upper
cable hole, and into the brake lever.
Note: Enough slack is left so the handlebars
can be fully turned in both directions without
interference between cables.
INTERNAL FORK
ROUTING
Product specificaties
Merk: | Felt |
Categorie: | Fiets E-bike |
Model: | Z series Disc Carbon |
Heb je hulp nodig?
Als je hulp nodig hebt met Felt Z series Disc Carbon stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Fiets E-bike Felt
13 Januari 2023
13 Januari 2023
13 Januari 2023
13 Januari 2023
Handleiding Fiets E-bike
- Hercules
- E-Move
- Trenergy
- Shimano
- Merida
- Devron
- Ebike20
- Pegasus
- Villette
- Sram
- Girandola
- Vogue
- Electra
- Keola
- Polisport
Nieuwste handleidingen voor Fiets E-bike
14 April 2025
22 Februari 2025
20 Februari 2025
26 Februari 2025
19 Februari 2025
26 Februari 2025
22 Februari 2025
31 Januari 2025
22 Februari 2025
18 Februari 2025