Fantini Cosmi S71 Handleiding


Bekijk gratis de handleiding van Fantini Cosmi S71 (2 pagina’s), behorend tot de categorie Gasmelder. Deze gids werd als nuttig beoordeeld door 59 mensen en kreeg gemiddeld 4.4 sterren uit 30 reviews. Heb je een vraag over Fantini Cosmi S71 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
8
S71-S72
Gas detection sensors for control units P30A
Combustible gas detection sensors to be used with the electronic control units P30A. The sensors are available
in 2 versions: S71 for methane gas and city gas, S72 for LPG.
INSTALLATION
Wall mounting.
Detection sensors should be fixed on the wall at a distance of approximately 2 meters from the gas using device in such position in
order to allow natural air circulation:
S71 for specific light gases (methane gas, city gas), this sensor has to be installed at a high level approximately 30-40 cm from
the ceiling.
S72 for heavy gases (cylinder liquid gas LPG), this sensor has to be installed to a low level approximately 30-40 cm above the floor.
Avoid installing the sensors:
behind barriers that hinder the air natural circulation in the environment.
near vents (keeping a minimum distance of 2 meters).
away from steam, smoke and other fumes.
Remove the cover by unscrewing the four front screws.
Install the base on the wall using for the cable input the appropriate cable gland.
76
128
65
Dimensions (mm)
Gas type Operating ambient
temperature
Protection
degree
S71 Methane gas, or other light gases - 10 ÷ 50 °C IP54
S72 LPG gas (cylinder liquid gas) or other heavy gases - 10 ÷ 50 °C IP54
B
C
A


Product specificaties

Merk: Fantini Cosmi
Categorie: Gasmelder
Model: S71

Heb je hulp nodig?

Als je hulp nodig hebt met Fantini Cosmi S71 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden