Extech 407860 Handleiding
Extech
Meetapparatuur
407860
Bekijk gratis de handleiding van Extech 407860 (10 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 3.8 sterren uit 20.5 reviews. Heb je een vraag over Extech 407860 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/10
USER MANUAL
Heavy Duty Vibration Meter
Model 407860
Additional User Manual Translations available at www.extech.com
40786 en0- -GB_v3.0 2/17
2
Introduction
Congratulations on your purchase of the Extech 407860 Vibration Meter. Model 407860 The
measures vibration levels in industrial machinery. Misalignment, poor balancing, structural
compromises, and other factors can cause unwanted vibration increases. The Model 407860 has
a frequency sensitivity that meets ISO-2954 and oers Displacement, Velocity and Acceleration
features. This meter is shipped fully tested and calibrated and, with proper use, will provide years
of reliable service.
Meter Description
1. Probe connector
2. RS-232 Connector
3. LCD Display
4. Function switches and pushbuttons
5. Probe
6. Magnetic base
7. Protective rubber meter jacket
8. Battery compartment (on rear)
Meter LCD Display
40786 en0- -GB_v3.0 2/17
3
Meter Operation
Connecting the Probe
1. Note that this meter accepts only the supplied vibration probe.
2. Plug the BNC connector end of the probe cable onto the BNC connector at the top of the meter.
3. The probe can then be connected to the tested machinery in three ways.
a. Attach the magnetic end of the probe to a on the equipment under test as ferrous material
shown in the accompanying diagram.
b. Manually hold the probe in place against the equipment under test as shown.
c. Unscrew the magnet from the probe end (as shown in the diagram) and use the threaded
mount to connect to a screw, bolt, or stud on the equipment under test.
POWER button and Auto Power OFF feature
1. Press the button to turn the meter ON. If the meter does not turn on, check the 9V POWER
battery.
2. To turn the meter o, press and hold the button until the meter beeps. POWER
3. The meter is equipped with an Automatic Power OFF utility that conserves battery life. If the
meter is left inactive for 10 minutes, omatically turn o. it will aut
Note: utility is disabled in the RECORD mode. Automatic Power OFF
FUNCTION button
Press the button to select RMS, PEAK or MAX-HOLD. FUNCTION
1. - Typical selection for vibration measurements RMS
2. – For measurement of the peak value. Not available in the Displacement mode. PEAK
3. MAX_HOLD – Holds and displays the maximum value. The display will update only when a
new maximum is measured. Not available in the Displacement mode.
Product specificaties
| Merk: | Extech |
| Categorie: | Meetapparatuur |
| Model: | 407860 |
Heb je hulp nodig?
Als je hulp nodig hebt met Extech 407860 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetapparatuur Extech
24 Mei 2025
24 Mei 2025
24 Mei 2025
1 Mei 2025
1 Mei 2025
1 Mei 2025
1 Mei 2025
1 Mei 2025
17 Maart 2025
30 Januari 2025
Handleiding Meetapparatuur
- Cliff
- Sonel
- Fixpoint
- Goclever
- Peak
- Lund
- Greisinger
- UHoo
- Kreg
- DeWalt
- Stamos
- Meec Tools
- Albrecht
- Sanwa
- Vemer
Nieuwste handleidingen voor Meetapparatuur
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025