Extech 380395 Handleiding

Extech Niet gecategoriseerd 380395

Lees hieronder de 📖 handleiding in het Nederlandse voor Extech 380395 (17 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17

User Manual

Digital High Voltage Insulation Tester

Model 380395 380396 or

2 380395_380396- - _V1.5 /en US 10 23

Introduction

Congratulations on your purchase of the Extech 380395 (120V) or 380396 (220V) High Voltage Insulation

Tester is meter provides four Insulation Resistance test ranges plus Continuity, AC/DC Voltage, . Th

Polarization Index and Dielectric Absorption Ratio measurements. This meter is shipped fully tested and

calibrated and, with proper care and , will provide years of reliable service. use

Features

• Auto ranging 6000 count LCD display with bargraph

• Selectable LCD backlight level function facilitates working dimly illuminated areas. in

• MAX/MIN, PEAK, Relative, and Data hold functions for DC/AC voltage measurements.

• Designed to the following safety standards:

IEC 61010-1 (CAT IV 600V Pollution degree 2)

IEC 61010-031 (Requirements for hand-held probes)

• Insulation test range: 0. 61MΩ to 0GΩ.

• Insulation test voltages: 500 0V, 100 V, 1 5 . 500V, and 000V

• AC/DC voltage: 0.5 V to 600 V.

• 200mA Continuity.

• Resistance: 0.1 Ω to 6kΩ.

• Auto-discharge function & voltage output warning function.

• E cally discharged after measurements. Discharge lectric charges stored in capacitive circuits are automati

status can be check using the real time voltage graph. ed bar

• LIVE circuit warning symbols plus audible warning.

• Live circuit detection prevents insulation test if voltage > 30 V is detected.

• Auto-power off function and battery check.

• Programmable Test Timer measurement function.

• Polarization Index measurement (PI).

• Dielectric Absorption Ratio measurement (DAR).

• Power source: Eight (8) 1.5V ‘C’ Cell Batteries.

3 380395_380396- - _V1.5 /en US 10 23

Safety

International Safety Symbols

This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for

further information.

This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages may be

present.

Danger: identifies conditions and actions that pose hazard(s) to the user.

Warning: alerts the user to avoid electric shock.

Caution: identifies conditions and actions that may damage the Insulation Resistance tester.

Operating Caution: identifies conditions where the user needs to take extra care during the

operation of the Insulation resistance tester

Danger: Use of this instrument in a manner not specified by the manufacturer may impair safety

features/protection provided by the equipment. Read all of the safety information carefully before

using or servicing the instrument.

This symbol indicates that the meter uses double or reinforced insulation.

Safety Notes

• Do not exceed the maximum allowable input range for any functions. of the meter’s

• Set the function switch OFF when the meter is not in use.

• Remove the batteries the meter is to be stored for longer than 60 days.if

Warnings

• Set the function switch to the appropriate position before measuring.

• Do not measure current on a circuit whose voltage exceeds 600V.

• When changing ranges always disconnect the test leads from the circuit under test.

• Do not use the Insulation resistance tester if it is damaged or if metal parts are exposed. Also, check

the meter for cracks or missing plastic.

• Be careful when working above 30V AC rms or 30V DC. Such voltages pose a shock hazard. Discharge all

circuit loads under test after measuring high voltage.

• Do not replace the batteries with the tester in a wet environment.

• Place the test leads in the proper input terminals. Ensure that the test leads are firmly connected to the

Insulation Resistance tester’s input terminals.

• Ensure that the Insulation Resistance tester is switched off when opening the battery compartment.

Product specificaties

Merk:	Extech
Categorie:	Niet gecategoriseerd
Model:	380395

Heb je hulp nodig?

Als je hulp nodig hebt met Extech 380395 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Extech

Extech 380396 Handleiding

25 Maart 2024

Extech 380395 Handleiding

25 Maart 2024

Extech HDV540 Handleiding

11 December 2023

Extech DCP36 Handleiding

26 Juni 2023

Extech CO100 Handleiding

31 Mei 2023

Extech 380405 Handleiding

28 Mei 2023

Extech DCP60 Handleiding

17 Mei 2023

Extech 382202 Handleiding

13 Mei 2023

Extech EC400 Handleiding

10 Mei 2023

Extech 382203 Handleiding

10 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024

Sony PDW-U4 Handleiding

26 April 2024

Sony NXL-FR318 Handleiding

26 April 2024