Extech 375475 Handleiding

Extech Schakelaar 375475

Lees hieronder de đź“– handleiding in het Nederlandse voor Extech 375475 (4 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
User's Guide
7-Day Programmable Digital Timer
Model 375475
Introduction
Congratulations on your purchase of the Extech 375475 Digital Timer. This device
features individual or multi-day timer settings (up to 6 On/Off settings per day), easy-to-
read LCD, and battery-backup for the real-time clock. Careful use of this timer will
provide years of reliable service.
V1.1 3/04 2
AM
Mo
12:00
00
|ON
AM
WE
12:00
00
|ON
AM
TU
12:00
00
|ON
AM
US
12:00
00
|ON
AM
Mo T W T FU E H R
12:00
00
|ON
AM
S SA U
12:00
00
|ON
AM
Mo T W T F S SU E H R A U
12:00
00
|ON
Specifications
General Specifications
Input Line Voltage 120VAC (60Hz)
Switching Interval 1 minute minimum
Max Output Current 15A (resistive load); 8A (lighting load)
Max Resistive Load 1800W (15A x 120VAC)
Max Lighting Load 960W (8A x 120VAC)
Max Motor Load 1 Hp
Memory Backup One 1.5VDC Type N battery
Dimensions 4x2x2" (104x54x51mm)
Weight 5.25 oz. (150g)
Operation
Set the Real-Time Clock
1. Day Set: Hold down the CLOCK button and
press the WEEK button until the correct day
appears at the top of the display.
2. Time Set: Hold down the CLOCK button and press the HOUR button until the display
indicates the correct hour. You may have to cycle through the hours twice to obtain the
proper AM or PM (on the left side of the display).
3. Hold down the CLOCK button and press the MIN button until the display indicates the
correct minutes. Seconds will automatically reset to zero.
Set the Power ON/OFF Timers
1. Push the PROG button once. 1ON will appear near the lower left corner of the display to
indicate the the first power-on time is ready to be programmed.
2. Press the HOUR and
MIN buttons to enter
your first desired
power-on time.
3. Press the WEEK button to select
the desired day. These days appear
along the top of the display. If “Mo
Tu We Th Fr Sa Su” all appear on
the display, these days all have the
same power-on time. You can
select “Mo Tu We Th Fr” as a
group, “Sa Su” as a group, or a
single day.
AM
Mo T W T F S SU E H R A U
_ _ _ _
|ON
AM
Mo T W T F S SU E H R A U
12:0000
|ON
AM Mo
12:0000
V1.1 3/04 3
4. When you have your first desired power-on time and date entered, press the PROG
button. 1
OFF
now appears on the display to indicate that the first power-off time is ready
to be programmed. Repeat steps 2 and 3 to enter your first desired power-off time.
5. Press the PROG button again. 2
ON appears on the display to indicate that the second
power-on time is ready to be programmed. Repeat the same procedure used in steps 2
through 4 to enter the rest of your power-on/power-off times (up to 6 on/off times
maximum).
6. Press the PROG button to step through the times you entered to make sure they are
correct.
7. Press the RST/RCL button to reset or recall any timer entries. When you reset a
particular power-on/off entry, four dashes will appear instead of time. When you recall
an entry, it will return the values that were set before you performed a reset.
8. Press the CLOCK button to return to the real time clock display.
9. Press the ON/AUTO/OFF button until the bar below the display is positioned above the
OFF legend on the face of the timer.
Connecting an Appliance to the Timer
1. Plug the Digital Timer into a standard AC outlet. If the power indicator light is on, press
ON/AUTO/OFF button once or twice until the light goes out. NOTE: The bar below the
display should be above the “OFF” legend.
2. Plug the appliance cord you wish to control into the socket on the Digital Timer. Make
sure any power switch on the appliance is set to on. (The appliance will not turn on
because the Digital Timer is set to off).
3. To manually turn the appliance on, press the ON/AUTO/OFF button until the power
indicator lights and the bar below the display is above the “ON” legend on the timer’s
faceplate.
4. To automatically control the appliance, press the ON/AUTO/OFF button until the bar
below the display is above the “AUTO” legend on the faceplate.
Mo T W T F S S
U E H R A U
_ _ _ _
|OFF
Mo T W T F S S
U E H R A U
|OFF 12:00
00
Mo T W T F S S
U E H R A U
_ _ _ _
2ON
Mo T W T F S S
U E H R A U
_ _ _ _
2OFF
AM
M T W T F S S
O U E H R A U
________

Product specificaties

Merk: Extech
Categorie: Schakelaar
Model: 375475

Heb je hulp nodig?

Als je hulp nodig hebt met Extech 375475 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schakelaar Extech

Extech

Extech 375475 Handleiding

29 Januari 2023

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar

IPGARD

IPGARD SUHN-4D-P Handleiding

16 April 2024
IPGARD

IPGARD SUHN-4S-P Handleiding

16 April 2024
IPGARD

IPGARD SDPN-8S-P Handleiding

16 April 2024
IPGARD

IPGARD SDVN-82-X Handleiding

16 April 2024
IPGARD

IPGARD SUHN-2S-P Handleiding

16 April 2024
IPGARD

IPGARD SDMN-4S-P Handleiding

16 April 2024
IPGARD

IPGARD SUHN-4S Handleiding

16 April 2024
IPGARD

IPGARD SDVN-42-X Handleiding

16 April 2024
Comet

Comet 3550.01.12 Handleiding

13 April 2024
StarTech.com

StarTech.com IES1G52UP12V Handleiding

10 April 2024