EXSYS EX-6069-2 Handleiding

Bekijk gratis de handleiding van EXSYS EX-6069-2 (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over EXSYS EX-6069-2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

651

BESCHREIBUNG & TECHNISCHE DATEN

AUFBAU

Anleitun

Vers. 1.0 / 01.11.22

E606

Die EX2 ist eine HighSpeed Gigabit Ethernet PCI Karte. Sie ist mit einem externen RJ45 -6069--

Anschluss ausgestattet. Die EX2 unterstützt den PCI & PCIX Bus mit 5 Volt und 3,3 Volt. -6069--

Der serielle PCI Bus unterstützt optimal die Leistung des schnellen Realtek Chipsatz. Die EX-

6069-2 gewährleistet so eine sichere Datenübertragung und exzellente Performance von bis zu

1 Gbit/s!

Switzerland:

EXSYS Vertriebs GmbH

Dübendorfstrasse 17

8602 Wangen

www.exsys.ch

Germany:

EXSYS Vertriebs GmbH

Industriestrasse 8

61449 Steinbach

www.exsys.de

RJ45 Anschluss

Status LED´s

Kompatibilität:PCI oder PCIX, 33Mhz-

Betriebssysteme:Windows 98SE / ME Vista / 7 / 8.x / 10 / 11 / Server 20xx / / 2000 / XP /

MAC / Linux / Unix / Novell

Anschlüsse:1x RJ45 Gigabit Ethernet Anschluss

Lieferumfang:2, Treiber CD, Low Profile Bügel, AnleitungEX-6069-

Zertifikate:

ANSCHLÜSSE & LED`S

RJ45 Anschluss:

Status LED´s:

RJ45 Anschluss

PinSignalPinSignalPinSignal

1BI_DA+4BI_DC+7BI_DD+

2BI_DA5BI_DC8BI_DD- - -

3BI_DB+6BI_DB -

DRIVER INSTALLATION

Windows

After completing the hardware installation, the operating system will automatically the card and

install this! If the driver should not be installed automatically, insert the driver CD into you CD-

ROM drive (eg drive D:) and then open the folder RTL8169SC/windows driversPlease select „“.

the folder with your operating system and install the driver (see Picture). Follow the hardware

assistant and finish the installation. Important! Restart your PC in any case after installing the

drivers.

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „Networkadapter“ the following new entry:

If you see this or a similar information the device is installed correctly.

HARDWAREINSTALLATION

Please note the following installation instructions. Because there are large differences between the

PC’s, we can give you only a general installation instructions for the EX--60692. Please refer your

computers reference manual whenever in doubt.’

1.Turn off the power to your computer and any other connected peripherals.

2.Remove the mounting screws located at the rear and/or sides panels of your Computer and

gently slide the cover off.

3.Locate an available PCI expansion slot and insert the card. Make sure that the card is plugged

in correctly.

4.Then attach the card with a screw to the rear panel of the computer.

5.Gently replace your computer’s cover and the mounting screws.

DRIVER INSTALLATION

MAC

After completing the hardware installation, the operating system will automatically the card and

install this! If the driver should not be installed automatically, insert the driver CD into you CD-

ROM drive (eg drive D:) and then open the folder RTL8169SC/MACPlease select the folder „“.

with your operating system and install the driver (see Picture). Follow the hardware assistant

and finish the installation. Restart your PC in any case after installing the drivers.Important!

Linux / Unix

After completing the hardware installation, the operating system will automatically the card and

install this! If the driver should not be installed automatically, insert the driver CD into you CD-

ROM drive (eg drive D:) and then open the folder RTL8169SC/UNIX(LINUX)Please select „“.

the folder with your operating system and install the driver (see Picture). Follow the hardware

assistant and finish the installation. Important! Restart your PC in any case after installing the

drivers.

LINK / Connected

ACT LAN DATA

Product specificaties