EXSYS EX-12005 Handleiding

Bekijk gratis de handleiding van EXSYS EX-12005 (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.0 sterren uit 8 reviews. Heb je een vraag over EXSYS EX-12005 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

65

Die EX12005 ist eine USB 3.2 (Gen2) PCIExpress Karte. Sie ist mit 4 externen Ports ausge---

stattet, wovon die ABuchsen 900mA und die CBuchsen 3A Strom zu Verfügung stellen. Die --

EX-12005 unterstützt die volle Leistung an allen externen Ports ohne das Sie zusätzlichen

Strom vom PCNetzteil benötigen. Sie unterstützt alle PCIExpress Slots von x4 bis x16. Der --

serielle PCI-Express Bus unterstützt optimal die Leistung des schnellen ASMedia Chipsatz. Die

EX-12005 gewährleistet so eine sichere Datenübertragung und exzellente Performance von bis

zu 10Gbit pro Sekunde! Die EX12005 unterstützt alle USB Anschlüsse von 1.1 bis 3.2.-

1

ANSCHLÜSSE

BESCHREIBUNG & TECHNISCHE DATEN

AUFBAU

Anleitun

Vers. 1.0 / 05.05.21

E1200

Kompatibilität:PCIExpress p1-x4 bis x16-

Betriebssysteme:Windows XP/ Vista/ 7/ 8.x/ 10/ Server 20xx/ Linux

Anschlüsse:2x USB 3.2 (Gen2) ABuchse, 2x USB 3.2 (Gen2) CBuchse--

Lieferumfang:12005, Treiber CD, AnleitungEX-

Zertifikate:

P4 & P5: 1x USB 3.2 (Gen2) CBuchse-

DRIVER INSTALLATION

CONNECTORS

HARDWAREINSTALLATION

DRIVER INSTALLATION

Windows XP/ Vista/ 7/ Server 2003/ 2008/ 2012

After starting Windows is recognizes a new Start the „USB (Universal Serial Bus)Controller-“.

„„“setup.exe“ file which is in the ASM3142 folder (see picture):

Follow the installation instructions and complete the installation.

Windows will now install automatically you right driver for your particular operating system. After

the installation the operating system detects the card and automatically install them.

Please note the following installation instructions. Because there are large differences between the

PC’s, we can give you only a general installation instructions for the EX12005. Please refer your -

computer’s reference manual whenever in doubt.

1.Turn off the power to your computer and any other connected peripherals.

2.Remove the mounting screws located at the rear and/or sides panels of your Computer and

gently slide the cover off.

3.Locate an available PCI-Express expansion slot and insert the card. Make sure that the card

is plugged in correctly.

4.Then attach the card with a screw to the rear panel of the computer.

5.Gently replace your computer’s cover and the mounting screws.

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „USBController-“the following new entry's:

If you see this or a similar information the device is installed correctly.

Windows 8.x/ 10/ Server 2012 R2/ 2016/ 2019

After the hardware installation, the operating system will recognize the device automatically and

install the drivers.

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „USBController-“the following new entry's:

If you see this or a similar information the device is installed correctly.

Linux

After the hardware installation, the operating system will recognize the device automatically and

install the drivers.

CHECK INSTALLED DRIVER

Now you should see the following new entry:

If you see this or a similar information the device is installed correctly.

P1 & P2:

1x USB 3.2

(Gen2) ABuchse-

P1 & P2:

USB 2.0 Pins‘

PinSignal

1VCC

2DATA-

3DATA+

4GND

USB 3.2 Pins‘

PinSignal

5SSTX+

6SSTX-

7GND

8SSRX+

9SSRX-

P4 & P5:

Note!

By dual assignment of the pins, the USB TypeC plug can be plugged into the port on -

both sides.

Product specificaties