EXSYS EX-46014 Handleiding

Bekijk gratis de handleiding van EXSYS EX-46014 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 5.0 sterren uit 8 reviews. Heb je een vraag over EXSYS EX-46014 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

651

AUFBAU

Anleitun

Vers. 1.1 / 06.03.25

E4601

DRIVER INSTALLATION

Windows XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx

After the hardware installation is completed, the operating system automatically detects the EX-

46014 and shows you a new . First, please download the driver from „“Serial PCIPort-

www.exsys.de or www.exsys.ch. The driver is available for your product under Downloads“”.

Open now the folder .Now select the folder of your operating system and „“IO_ASIX_AZ99100

start the application which is located in the respective folder(see picture). „“ AX99100_Setup

Follow the installation instructions and complete the installation. Restart your PC Important!

after the installation.

CHECK INSTALLED DRIVER

Open the. Now you should see at and at >DeviceManager<-„Ports (COM & LPT)“

„“ Mutlifunction adapterthe following new Entries:

If you see these or similar entries, the card is installed correctly.

HARDWAREINSTALLATION

Please note the following installation instructions. Because there are large differences between the

PC’s, we can give you only a general installation instructions for the EX46014. Please refer your -

computer’s reference manual whenever in doubt.

1.Turn off the power to your computer and any other connected peripherals.

2.Remove the mounting screws located at the rear and/or sides panels of your Computer and

gently slide the cover off.

3.Locate an available PCI-Express expansion slot and insert the card. Make sure that the card

is plugged in correctly.

4.Then attach the card with a screw to the rear panel of the computer.

5.Gently replace your computer’s cover and the mounting screws.

DRIVER INSTALLATION

BESCHREIBUNG & TECHNISCHE DATEN

Kompatibilität:PCIExpress p1-x1 bis x16-

Betriebssysteme:Windows XP Vista / 7 / 8.x / 10 / 11 / Server 20xx / Linux/

Anschlüsse:4x 9Pin DSub Seriell Stecker--

Lieferumfang:46014, Low Profile Bügel, AnleitungEX-

4x 9Pin DSub Seriell Stecker--

Die EX46014 ist eine seriell RS232 PCIExpress Karte. Sie ist mit vier seriellen FIFO 16C550 ---

Anschlüsse für den Anschluss von HighSpeed seriellen RS232 Peripherie Geräten (z.B. --

Modem, Plotter, Drucker, Scanner usw.) ausgestattet. Die EX46014 unterstützt alle PCI--

Express Slots von p1-x1 bis x16. Der serielle PCIExpress Bus unterstützt optimal die Leistung des -

schnellen ASIX Chipsatz. Die Karte gewährleistet so eine sichere Datenübertragung und exzel-

lente Performance von bis zu 115KBaud/s für jedes angeschlossene serielle Gerät! Es ist nicht

möglich die I/O Adressen und Interrupts manuell einzustellen, da die Einstellungen der Karte

vom System (BIOS) und beim installieren des Betriebssystems automatisch vorgenommen

werden.

ANSCHLÜSSE

9Pin DSub Seriell Stecker:--

9Pin DSub Seriell Stecker--

PinSignalPinSignalPinSignal

14DTR7RTSCDC

2RXD5GROUND8CTS

3TXD6DSR9 RI

Switzerland:

EXSYS Vertriebs GmbH

Dübendorfstrasse 17

8602 Wangen

www.exsys.ch

Germany:

EXSYS Vertriebs GmbH

Industriestrasse 8

61449 Steinbach

www.exsys.de

Italy:

EXSYS Italia Srl

Via Belvedere, 45/B

I22100 Como -

www.exsys.it

Linux

After the hardware installation is completed, the operating system automatically recognizes the

EX-46014. First, please download the driver from www.exsys.de or www.exsys.ch. The driver is

available for your product under DownloadsOpen now the folder . The “”. „“IO_ASIX_AZ99100

drivers for your Linux system are located in the folder (see picture). Restart „“ LinuxImportant!

your PC after the installation.

Product specificaties