EXSYS EX-13003 Handleiding

Bekijk gratis de handleiding van EXSYS EX-13003 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 30 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over EXSYS EX-13003 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

USB 2.0 APlug-

PinSignalPinSignal

1VCC3DATA+

2DATA4GND-

6

5

Das 41 USB zu Seriell Kabel EX13003 mit A und CStecker stellt wahlweise eine serielle -in----

RS--232/422/485 Schnittstelle sowie RS232 kompatible TTL 5V oder 3.3V Logikpegel zur

Verfügung. Die Verbindungen der seriellen Anschlüsse erfolgen auf einfache Weise am

integrierten Terminalblock. Durch den einfachen Anschluss am USBA oder USBC Port muss --

der Rechner nicht geöffnet werden und das EX13003 kann bei laufendem Betrieb installiert -

werden.

Kompatibilität:USB 1.1, 2.0 & 3.2

Betriebssysteme:Windows 9.x / ME / 2000 / XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx/

Linux / MAC

Anschlüsse:1x USB 2.0 AStecker / CStecker --

-- 1x 9pin Terminal Block seriell RS232 /

-- 1x 4pin Terminal Block seriell RS422/485 /

- 1x 5pin Terminal Block TTL

Lieferumfang:EX-13003

1

BESCHREIBUNG & TECHNISCHE DATEN

AUFBAU

USB AStecker -

zum Anschluss an PC

RS- 232 Pin Assignment:

CONNECTORS & STATUS LEDS‘

CLEANING

USB 2.0 APlug:-

HARDWAREINSTALLATION

DRIVER INSTALLATION

Because there are large differences between PC’s, we can give you only a general installation

guide for the EX-13003. Please refer your computers reference manual whenever in doubt.

1.--- Connect the EX13003 USB to the USB APort or CPort at the your PC.

2.When you are ready you can start your PC and continue with the point Driver Installation„“.

Windows

After the hardware installation Windows will recognize the device automatically and install the

drivers. If the driver should not be installed automatically, please download the driver from our

homepage (www.exsys.de / www.exsys.ch) first. Now select the folder with your operating

system and install the driver. Follow the hardware assistant and finish the installation.

Important! Restart your PC in any case after installing the drivers.

CHECK INSTALLED DRIVER

Open the . Now you should see at >Device manager<„Ports (COM & LPT)“ and „USB-

Controller“the following new entry:

If you see this or a similar information the device is installed correctly.

To clean the unit, use only a dry, lintfree cloth and apply light pressure to remove dirt. Be -

careful not to leave any fibres of the cloth in the connector area.

Never use a damp or wet cloth for cleaning!

Terminal Block

USB 2.0 CStecker -

zum Anschluss an PC

5pin Terminal Block-

TTL

9pin Terminal Block-

seriell RS-232

Note!

By dual assignment of the pins, the USB TypeC plug can be plugged into the port on -

both sides.

USB 2.0 CPlug:-

9pin serial RS232 Terminal Block--

PinSignalPinSignalPinSignal

1CTS4TXD7DSR

2RTS5GND8DTR

3RXD69 DCD RI

19 . . . . . . . . . . . . . . .

RS--- 422 (4wire) / 485 (2wire) Pin Assignment:

Terminal Block

14 23

4pin serial RS422/485 Terminal Block--

PinSignalPinSignal

13 (485: B)RX- TX-

2RX+4TX+ (485: A)

TTL Pin Assignment:

Terminal Block

5pin TTL Terminal Block-

PinSignalPinSignal

15V Logic Level 3RXD

23.3V Logic Level 5GND

3TXD

14 235

Note!

Only one serial connection can be established with the EX13003 41 cable; --in-

simultaneous use of RS232, RS422, RS485 or TTL is not possible.---

4pin Terminal Block-

seriell RS422/485-

GND: Pin 5 from TTL

Switzerland:

EXSYS Vertriebs GmbH

Dübendorfstrasse 17

8602 Wangen

www.exsys.ch

Germany:

EXSYS Vertriebs GmbH

Industriestrasse 8

61449 Steinbach

www.exsys.de

Italy:

EXSYS Italia Srl

Via Belvedere, 45/B

I22100 Como -

www.exsys.it

Anleitun

Vers. 1.0 / 06.03.24

E1300

Product specificaties