EXSYS EX-46001 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor EXSYS EX-46001 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 4.9 sterren beoordeeld

Pagina 1/2
6 5 1
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Anleitun
Vers. 1.0 / 30.11.22
E 4600
Kompatibilität: PCI Express p1-x1 bis x16 -
Betriebssysteme: Windows XP Vista / 7 / 8.x / 10 / 11 / Server 20xx / Linux /
Lieferumfang: 46001, Low Profile Bügel, Treiber CD, Anleitung EX-
Zertifikate:
1x 25 Pin D Dub Parallel Buchse- -
Die EX 46001 PCI Express Parallel Karte stellt einen parallelen SPP/EPP/ECP High Perfor-- -
mance Ausgang zur Verfügung. Sie erweitert Ihren PC, Workstation oder Server über den PCI-
Express Bus um einen weiteren parallelen Ausgang. Mit der EX 46001 bestehen keine Konflikte -
mit IRQ und I/O Adressen und sie ist PCIe Plug Play Kompatibel ist. Im Lieferumfang ist - -and- -
ein Low Profile Bügel zum Einbau in schmale PC Gehäuse enthalten.
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
ANSCHLÜSSE
25- - Pin D Sub Parallel Buchse:
25- - Pin D Sub Parallel Buchse
Pin Signal Pin Signal Pin Signal
1 STROBE ACKNOWLEDGE GROUND 10 19
2 DATA 0 BUSY GROUND 11 20
3 DATA 1 PAPER EMPTY GROUND 12 21
4 DATA 2 SELECT GROUND 13 22
5 DATA 3 AUTO FEED GROUND 14 23
6 DATA 4 ERROR GROUND 15 24
7 DATA 5 INIT GROUND 16 25
8 DATA 6 SELECT INPUT 17
9 DATA 7 GROUND 18
DRIVER INSTALLATION
Windows XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx
After the hardware installation is completed, the operating system automatically detects the EX-
46001 and shows you a new . Now insert the driver CD into your CD ROM „ “Parallel PCI Port--
drive (e.g. drive D:) and open the folder „SERIAL&PARALLEL/Ax99100 “. Now select the
folder of your operating system and start the application which is located in „ “ AX99100_Setup
the respective folder (see picture). Follow the installation instructions and complete the installa-
tion. Restart your PC after the installation.Important!
CHECK INSTALLED DRIVER
Open the . Now you should see at >Device Manager<-„Ports (COM & LPT)“ and at
„ “ Mutlifunction adapter the following new Entries:
If you see these or similar entries, the card is installed correctly.
HARDWARE INSTALLATION
Please note the following installation instructions. Because there are large differences between
the PC s, we can give you only a general installation instructions for the EX 46001. Please refer ’-
your computer s reference manual whenever in doubt.’
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer
and gently slide the cover off.
3. -Locate an available PCI Express expansion slot and insert the card. Make sure that the
card is plugged in correctly.
4. Then attach the card with a screw to the rear panel of the computer.
5. Gently replace your computer s cover and the mounting screws.’
DRIVER INSTALLATION
Linux
After the hardware installation is completed, the operating system automatically recognizes the
EX- -46001. Now insert the driver CD into your CD ROM drive (e.g. drive D:) and open the folder
„ “ „ “ SERIAL&PARALLEL/Ax99100 . The drivers for your Linux system are located in the linux
folder (see picture). Restart your PC after the installation.Important!
2 3
4
TREIBER INSTALLATION
Windows XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx
Nach Abschluss der Hardwareinstallation erkennt das Betriebssystem die EX 46001 automa--
tisch und zeigt Ihnen einen neuen „Paralleler PCI Anschluss-“ an. Legen Sie nun die Treiber
CD in Ihr CD ROM Laufwerk (z.B. Laufwerk D:) ein und öffnen Sie den Ordner -
„ “SERIAL&PARALLEL/Ax99100 . Nun wählen Sie den Ordner Ihres Betriebssystems aus und
starten Sie die Anwendung welche sich im jeweiligen Ordern befindet (siehe „ “ AX99100_Setup
Abbildung). Folgen Sie den Installationsanweisungen und schließen Sie die Installation ab.
Wichtig! Starten Sie Ihren PC nach der Installation neu.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den . Jetzt müssten Sie unter >Geräte Manager<-„Anschlüsse (COM & LPT)“ und
unter folgende neue Einträge sehen:„ “ Multifunktionsadapter
Sind diese oder ähnliche Einträge vorhanden, ist die Karte richtig installiert.
LAYOUT
Manua
Vers. 1.0 / 30.11.22
E 4600
Schweiz:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Deutschland:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
HARDWARE INSTALLATION
Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwischen
PC‘s gibt, können wir Ihnen nur eine generelle Anleitung zum Einbau der EX 46001 geben. Bei -
Unklarheiten halten Sie sich bitte an die Bedienungsanleitung Ihres Computersystems.
1. Schalten Sie Ihren Rechner und alle angeschlossenen Peripheriegeräte aus und ziehen
Sie bei allen Geräten den Netzstecker.
2. Lösen Sie die Schrauben des Gehäuses auf der Rückseite Ihres Computers und entfernen
Sie vorsichtig das Gehäuse.
3. - -Suchen Sie jetzt einen freien PCI Express Steckplatz und stecken Sie die EX 46001
vorsichtig in den ausgewählten PCI Express Steckplatz ein. Beachten Sie, dass die EX- -
46001 korrekt eingesteckt ist und kein Kurzschluss entsteht.
4. - Danach befestigen Sie die EX 46001 mit einer Schraube am Gehäuse.
5. Jetzt das Computergehäuse mit den Schrauben wieder schließen.
DESCRIPTION & TECNICAL INFORMATION
Compatibility: PCI Express p2-x1 to x16 -
Operating System: Windows XP Vista / 7 / 8.x / 10 / 11 / Server 20xx / Linux /
Connectors: 1x 25 Pin D Sub Parallel Connector - -
Extent of Delivery: 46001, Low Profile Bracket, Driver CD, Manual EX-
Certificates:
The EX 46001 PCI Express parallel card provides a parallel SPP/EPP/ECP high performance - -
output. It adds another parallel output to your PC, workstation or server via the PCI-Express
bus. With the EX 46001 there are no conflicts with IRQ and I/O addresses and it is PCIe Plug- -
and-Play compatible. A low profile bracket is included for installation in narrow PC cases.
CONNECTORS
25- - Pin D Sub Parallel Connector:
25- - Pin D Sub Parallel Connector
Pin Signal Pin Signal Pin Signal
1 STROBE ACKNOWLEDGE GROUND 10 19
2 DATA 0 BUSY GROUND 11 20
3 DATA 1 PAPER EMPTY GROUND 12 21
4 DATA 2 SELECT GROUND 13 22
5 DATA 3 AUTO FEED GROUND 14 23
6 DATA 4 ERROR GROUND 15 24
7 DATA 5 INIT GROUND 16 25
8 DATA 6 SELECT INPUT 17
9 DATA 7 GROUND 18
TREIBER INSTALLATION
Linux
Nach Abschluss der Hardwareinstallation erkennt das Betriebssystem die EX 46001 automa--
tisch. Legen Sie nun die Treiber CD in Ihr CD ROM Laufwerk (z.B. Laufwerk D:) ein und öffnen -
Sie den Ordner „SERIAL&PARALLEL/Ax99100 “. Die Treiber für Ihr Linux System befinden
sich im Ordner (siehe Abbildung). Starten Sie Ihren PC nach der Installation „ “ linux Wichtig!
neu.
1x 25 Pin D Dub Parallel Connector- -


Product specificaties

Merk: EXSYS
Categorie: Niet gecategoriseerd
Model: EX-46001

Heb je hulp nodig?

Als je hulp nodig hebt met EXSYS EX-46001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden