EXSYS EX-1309-9 Handleiding

EXSYS Kabels voor pc's en randapparatuur EX-1309-9

Lees hieronder de 📖 handleiding in het Nederlandse voor EXSYS EX-1309-9 (8 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Congratulation on your purchasing this high performance 4-port

RS232/422/485 3- -1 to USB2.0 Adapter Cable It supports 1 serial port which in .

can be set in RS232, RS422, RS485-2W, or RS485-4W modes. The UART based

serial port fully compatible with most of the RS232C, RS422 and RS485 is

devices available from the market. It an ideal solution for most of serial is

applications.

Features:

 USB 2.0 Ful Speed (12Mb Compatible l ps)

 Supports 1x -Male-Connector RS232/422/485 3- -1 Serial Port DB9 in

 Supports 4-wire RS422, RS485 and 2-wire RS485 Modes

 Supports RS485 Auto Transceiver Turn Around by Unique Featured ATTA TM

Hardware

 Supports Baud Rate up to 921.6Kpbs

 Supports Win2000, XP, 2003, 2008, Vista, Win 7 .x, 10, Linux and others, 8

EX- -9 1309

RS232/422/485 3-ini-1 to USB2.0 Adapter Cable,

w/ DB9M Connector

1. Introduction

2. Connector Layout

USB Type-A

Plug

DB9M Connector

(R232/422/485)

Mode

Selection

Switch

RS232/422/485 3- -1 to USB2.0 Adapter Cable, w/ DB9M Connectorin

There is an eight 8-pin DIP switch next to the connector for changing the

operating modes, enable/disable terminator and the bias for transmitter and

receiver signals.

1. Mode Settings:

The DIP switch has 8 pins, the first 3 pins (M0, M1, M2) are for mode settings

(RS232, RS485-2wire, RS485-4wire or RS422 modes), pin 4 (TERM) is to enable or

disable terminator. Pin 5 and 6 (T+, T-) is for biasing TX+ and TX- signals. Pin 7

and 8 (R+, R-) is to enable or disable bias for RX+ and RX- signals.

Note: Pin 4 to 8 are designed for RS422 and RS485 only and should be

set to when you are setting the port to RS232 modeOFF .

Modes

Settings

(ON)





RS232

3. Mode Switch Settings

RS232/422/485 3- -1 to USB2.0 Adapter Cable, w/ DB9M Connectorin

RS485- 2W

(Default)

RS485- 4W

RS422

2. Termination Resistor Settings:

The pin 4 of the DIP switch is to enable the 120 Ohm termination resistor

between RX+ and RX- signals.

DIP Switch Pin 4

RS485-2wire mode:

RS485-4wire or RS422 mode:

Product specificaties

Merk:	EXSYS
Categorie:	Kabels voor pc's en randapparatuur
Model:	EX-1309-9
Kleur van het product:	Zwart
Gewicht:	150 g
Snoerlengte:	1.8 m
Gebruikershandleiding:	Ja
Aantal per verpakking:	1 stuk(s)
Temperatuur bij opslag:	-40 - 75 °C
Compatibele besturingssystemen:	Win98SE/ ME/ XP/ 200x/ Vista/ 7/ 8.x/ 10 (32&64) WinCE/ Server 2012R2/ Linux/ Mac OS 10.x
Bedrijfstemperatuur (T-T):	0 - 55 °C
Aansluiting 1:	USB 2.0
Aansluiting 2:	RS-232/422/485
Aansluiting 1 type:	Mannelijk
Aansluiting 2 type:	Mannelijk