EXSYS EX-12297HMS Handleiding
Bekijk gratis de handleiding van EXSYS EX-12297HMS (2 pagina’s), behorend tot de categorie USB Hub. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over EXSYS EX-12297HMS of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2

651
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Anleitun
Vers. 1.0 / 01.10.23
E12297HM
Kompatibilität:USB 1.1, 2.0 & 3.0/3.1/3.2
Betriebssysteme:Alle Betriebssysteme
Anschlüsse:2x USB 3.2 Gen 2x1 CBuchse, 5x USB 3.2 Gen 1 ABuchse--
--- 1x DCBuchse 930V, 1x Terminal Block 930V
Lieferumfang:12297HMS, Netzteil (12V/5A), EX-
- USB 3.2 Gen 2x1 Kabel (verschraubbar) 1 m, DINRail Kit,
Wandmontagehalterung, Anleitung
Zertifikate:
HARDWAREINSTALLATION
DRIVER INSTALLATION
Because there are large differences between PCs, we can give you only a general installation ’
guide for the EX12297HMS. Please refer your computers reference manual whenever in -’
doubt.
1.--Install the EX12297HMS on a mounting rail by using the DINRail Kit or on the wall using
the Wall Mounting Brackets.
2.Connect the USB 3.2 Gen 2x1 cable with the USB 3.2 Gen 2x1 Upstream CPort at the EX--
12297HMS.
4.Now connect the power connector of the supplied power supply to the DC socket of the
hub or connect a compatible DIN rail power supply to the terminal block. Then plug the
mains plug of the power supply unit into a wall socket.
5.--Now connect the other end from the USB 3.2 Gen 2 cable (CPlug) to the USB CPort at
your PC.
All Operating Systems
After the hardware installation the Operating System will recognize the EX12297HMS -
automatically and install the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „USBController-“the following new entry:
If you see this or a similar information the hub is installed correctly.
CONNECTORS
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
Mounting of the DINRail Kit with -
three screws on the rear side
Mounting the Wall Mounting
Bracket with four screws on
each side
Der robuste und industrietaugliche EX12297HMS ist ein USB 3.2 Gen 2x1 MetallHub für bis --
zu sieben Endgeräte, der an der Wand oder auf einer Hutschiene montiert werden kann. Er wird
über ein USBC Kabel mit dem HostPC verbunden und verfügt über zwei USBC 3.2 Gen 2x1 ---
Ports und fünf USBA 3.2 Gen 1 Ports für Endgeräte. Die beiden USBC Ports bieten eine --
hervorragende Performance von bis zu 10 Gbit/s (SuperSpeed USB 10Gbps), während die
Datenübertragung an den fünf USBA Ports bis zu 5 Gbit/s (SuperSpeed USB 5Gbps) beträgt. -
Über die externe Stromversorgung können bei einer Maximalleistung von 56 Watt bis zu 2.5 A
pro Port zur Verfügung gestellt werden. Dies ermöglicht das problemlose Aufladen von iPhone,
iPad, Smartphone und Tablet. Die Stromversorgung erfolgt über das mitgelieferte
Steckernetzteil oder ein optional erhältliches DINRail Netzteil (SelfPower).--
5x USB 3.2 Gen 1
Downstream APorts -
930V DCBuchse für --
mitgeliefertes Netzteil
930V TBlock für optional --
erhältliches Netzteil
Power LED
2x USB 3.2 Gen 2x1
Downstream CPorts -
1x USB 3.2 Gen 2x1
Upstream CPort-
+9V to +30V DCConnector:-
USB 3.2 Gen 2x1 C- Port:
Attention!
Never plug in with
force or in wrong
direction.
USB 3.2 Gen 1 APort:-
D+D-
StdB_SSTX -
StdB_SSTX+
StdB_SSRX+
StdB_SSRX -
GND_DRAIN
GNDVCC
+9V to +30V TBlock:-
- V
-
+
+V
ATTENTION!
Only for use with the power supply included in the
scope of delivery or another compliant power supply!
ATTENTION!
Please pay attention to the correct polarity!
Never connect power to GND it will destroy your
Hardware!
Never connect the power supply to the terminal block
while it is switched on!
Redundant power supply is possible by simultaneous use of DCConnector and Terminal -
Block!
GND
(Ground)
USBVersionNamingMax. data rate-
USB 1.0Full Speed 12 Mbit/s
USB 2.0Hi-Speed480 Mbit/s
USB 3.2 Gen 1
formerly:
USB 3.1 Gen 1
USB 3.0
USB 5Gbps
formerly:
SuperSpeed USB
5 Gbit/s
USB 3.2 Gen 2x1
formerly:
USB 3.2 Gen 2
USB 3.1 Gen 2
USB 10Gbps
formerly:
SuperSpeed USB 10 Gbps
10 Gbit/s
USB 3.2 Gen 2x2USB 20Gbps
formerly:
SuperSpeed USB 20 Gbps
20 Gbit/s
USB 4 (Version 1)
USB 4.0
USB 40Gbps40 Gbit/s
USB 4 Version 2USB 80Gbps80 Gbit/s
USB versions overview:
Product specificaties
| Merk: | EXSYS |
| Categorie: | USB Hub |
| Model: | EX-12297HMS |
Heb je hulp nodig?
Als je hulp nodig hebt met EXSYS EX-12297HMS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding USB Hub EXSYS
8 Juli 2026
8 Juli 2026
4 Mei 2026
13 Maart 2026
12 Maart 2026
2 Maart 2026
25 November 2025
11 November 2025
10 November 2025
23 September 2025
Handleiding USB Hub
Nieuwste handleidingen voor USB Hub
21 Juli 2026
21 Juli 2026
20 Juli 2026
20 Juli 2026
13 Juli 2026
13 Juli 2026
13 Juli 2026
9 Juli 2026
26 Juni 2026
25 Juni 2026