EverFocus ED640 Handleiding

Bekijk gratis de handleiding van EverFocus ED640 (9 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over EverFocus ED640 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Indoor DWDR 3-Axis Varifocal

700TVL IR Dome Camera

Operation Instructions

Model No. ED640

Please read this manual first for correct installation and operation. This manual should be

retained for future reference. The information in this manual was current when published.

The manufacturer reserves the right to revise and improve its products. All specifications are

therefore subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and

audio speakers since the electromagnetic fields generated from these devices may distort the

video image or otherwise interfere with camera operation.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce

materials other than those recommended herein. Improper disassembly or introduction of

corrosive materials may result in equipment failure or other damage.

3. Try to avoid facing the camera toward the sun.

In some circumstances, direct sunlight may cause permanent damage to the sensor and/or

internal circuits, as well as creating unbalanced illumination beyond the capability of the camera

to compensate.

4. Keep the power cord away from water and other liquids and never touch the power cord

with wet hands. Touching a wet power cord with your hands or touching the power cord with

wet hands may result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents.

Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning

For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the

hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the

camera lens. Use a damp soft cloth to remove any dirt from the camera body. Please do not use

complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.

7. Do not operate the camera beyond the specified temperature, humidity or power source

ratings. This camera is suitable for indoor operation only. Use the camera at temperatures within

-10° ~ +50°(14~122) and humidity between 30% and 90%. The input power source is

12VDC. Regulated power supply required.

Product specificaties