EverFocus ED335 Handleiding

Bekijk gratis de handleiding van EverFocus ED335 (18 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 31 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over EverFocus ED335 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1/3” CCD Indoor 3-Axis Dual Voltage

True Day/NightIR Dome Camera

Operation Instructions

Model No. ED335

Please read this manual first for correct installation and operation. This manual should be retained for future

reference. The information in this manual was current when published. The manufacturer reserves the right

to revise and improve its products. All specifications are therefore subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio

speakers since the electromagnetic fields generated from these devices may distort the video image.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce

materials other than those recommended herein.

Improper disassembly or introduction of corrosive materials may result in equipment failure or other

damage.

3. Try and avoid facing the camera toward the sun.

In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal

circuits.

4. Keep the power cord away from water and other liquids and never touch the power cord with

wet hands.

Touching a wet power cord with the hands or touching the power cord with wet hands may result in

electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning

Use a damp soft cloth to remove any dirt from the camera body. Use lens tissue or a cotton tipped

applicator and ethanol to clean the camera lens. Please do not use complex solvents, corrosive or

abrasive agents for cleaning.

7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.

Use the camera at temperatures within 0 ~ 40(32℃ ℃℉ ℉~104) and humidity between 20~80%.

The input power source is 12VDC/24VAC.

Product specificaties