EverFocus EPD200A Handleiding

EverFocus Bewakingscamera EPD200A

Lees hieronder de 📖 handleiding in het Nederlandse voor EverFocus EPD200A (10 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

EVERFOCUS

Indoor Pendent Dome Camera

Operation Instructions

Model No. EPD200

Please read this manual first for correct installation and operation. This manual should be retained

for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are therefore

subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,

audio speakers since the magnetic fields generate from above devices will distort the video

images.

2. Never disassemble the camera nor put impurities in it.

Disassembly or impurities may result in trouble or fire.

3. Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4. Keep the power cord away from water and liquid.

Touching the wet power cord may result in electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in failure, electric shock or fire.

6. Cleaning

Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from

the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the

camera lens.

7. Do not operate the camera beyond the specified temperature, humidity or

power source ratings.

Use the camera at temperatures within 0℃~ 50℃/32℉ ℉~122 and humidity between 20%~

80%. The input power source is 12VDC/24VAC.

PREFACE

EPD200 is compact, full functioned CCD Color Cameras for indoor pendent mount. The

dome camera is designed with advanced digital processing circuitry for high resolution 1/3"

CCD sensor, it has DIP switch for FL ON/OFF, BLC ON/OFF, AGC ON/OFF. The dome

camera uses a vari-focal auto iris lens for discreet surveillance or close-up viewing and it

features with iris level volume control for the best viewing quality.

FEATURES

z 1/3” SONY CCD pick up device for more than 380 TV lines of horizontal resolution

z The high sensitivity of 1.0 Lux/F=1.2 is achieved by using 1/3” SONY CCD

z The Electronic Shutter and AGC functions allow the camera to be used in environment

with varying light levels

z Built-in Vari-Focal lens(optional)

z With manual PAN mechanism up to 90 degree

z FL, BLC, AGC On/Off switchable

z Compact size

z System available for NTSC or PAL

CONTENT LIST

1. Camera Unit

2. Operation Instructions (this document)

3. Hex Wrench

4. Power Extension Cable

5. Video Cable for testing Video Connector

OPTIONAL ACCESSORY

• EN220 5.6-inch LCD Test Monitor

SPECIFICATION

Pickup Device 1/3" SONY Super HAD CCD

Video Format

TSC or PAL

Scanning System

TSC: 525 TV lines, 60 fields/sec.

PAL: 625 TV lines, 50 fields/sec.

Picture Elements 510 x 492 (NTSC); 500 x 582 (PAL)

Horizontal Resolution 380 TVL

Sensitivity 0.3 Lux /F=1.2

S/N Ratio Over 48dB(AGC Off)

Electronic Shutter 1/50(1/60)~1/100,000

Lens Vari-Focal or Fixed Lens

Video Output BNC 1.0Vp-p 75ohm

Back Light Comp.. On/Off switch

Auto Gain Control On/Off switch

Flickerless On/Off switch

Auto White Balance Auto

Auto IRIS DC-Drive

Gamma Correction 0.45

Sync. Mode Internal Sync.

Power Source Two types:

12VDC/24VAC

12VDC only

Power Consumption 12VDC:3W max.

24VAC: 1.5W max

Video Output Connector BNC output x 1

2.5mm Lock x 1

AC 24V Power Connector + Video 2.5mm x 2-pin(for DC jack)

2.0mm x 2-pin(for BNC)

DC 12V Power Connector + Video 1.25mm x 4-pin, (1BNC, DC jack)

Weight 0.3 kg ; 0.66 lbs

Dimension 110mm(W)x 125(H)/ 4.33”(W) x4.92”(H)

Pendent Tube Diameter: 26mm/1.06”

Operating Temperature 0~50 ; 32°F~122°F (20%~80% Humidity)

Certifications CE, FCC

Product specificaties

Merk:	EverFocus
Categorie:	Bewakingscamera
Model:	EPD200A
Kleur van het product:	Wit
Gewicht:	270 g
Breedte:	110 mm
Diepte:	110 mm
Hoogte:	125 mm
Gebruikershandleiding:	Ja
Vormfactor:	Dome
Ondersteuning voor plaatsing:	Binnen
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond
Maximum resolutie:	510 x 492 Pixels
Diameter:	26 mm
Stroomuitvoer (volt):	+12V, +12V2
Minimale belichting:	0.3 Lux
Meegeleverde kabels:	BNC
Brandpuntbereik:	3.8 - 9 mm
Certificering:	CE, FCC
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/3 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CCD
Optische zoom:	- x
Camera sluitertijd:	1/100000 s
Interface:	BNC
Witbalans:	Auto
Type camerasluiter:	Elektronisch
Signaal/ruis-verhouding:	48 dB
Aantal TV lijnen:	380
Stroomverbruik (typisch):	3 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
F-nummer (relatieve aperture):	1.2
NTSC resoluties:	510 x 492 Pixels
PAL resoluties:	500 x 582 Pixels