EtherWAN EX19164A Handleiding

Bekijk gratis de handleiding van EtherWAN EX19164A (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over EtherWAN EX19164A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Copyright 2020 EtherWAN Systems, Inc. Page 1

All Rights Reserved

EX19164A

11/04/2020

1

Unpacking

Unpack the items. Your package should include:

One EX19164A Ethernet PoE switch

One AC power cord

Rack-mounting hardware kit

If items are missing or damaged, notify your

EtherWAN representative. Keep the carton and

packing material.

2

What Else You Need

Category 5 or better Ethernet cables

Small form-factor pluggable (SFP) optical

transceiver modules for optional fiber

connectivity

3

Select a Location

Desktop installations: Mount on a flat table

or shelf surface.

Rack installations: Use a 19-inch EIA standard

equipment rack that is grounded and

physically secure.

Identify a power source within 6 feet (1.8

meters).

Choose a dry area with ambient temperature

between 0 and 40ºC (32 and 104ºF).

Do not cover fans on the rear and side.

Keep away from heat sources, sunlight, warm

air exhausts, hot-air vents, and heaters.

Be sure there is adequate airflow.

Keep the switch at least 6 ft (1.83 m) away

from the nearest source of electromagnetic

noise, such as a photocopy machine.

4

Connect to the Data Ports

Sixteen Gigabit RJ45 Ports

The switch is equipped with 16 10/100/1000

Mbps RJ45 ports that provide IEEE802.3at Power

over Ethernet (PoE+), with up to 30W per port

(250W total PoE power budget). These ports can

be connected to PoE devices such as IP

surveillance cameras or Voice Over Internet

Protocol (VoIP) phones.

A.

Insert one end of a Category 5 or better

Ethernet cable into a switch port.

B.

Connect the other end into the Ethernet port

of the device.

C.

Repeat steps A and B for each additional

device you want to connect to the switch.

Four Gigabit Combo/SFP Ports

The RJ45 Ports 13 to 16 can be used as combo

ports along with four 1000Mbps SFP ports.

The SFP ports accommodate standard SFP

modules; wear an ESD-preventive wrist strap

before connecting SFP modules.

These combo ports operate in “either/or”

fashion. This means that attaching to either an

RJ45 or SFP port renders the equivalent partner

port unavailable. See the examples below.

5

Apply AC Power

A.

Connect the female end of the supplied AC

power adapter cable to the power receptacle

on the switch rear panel. Connect the other

end to a grounded 3-pronged AC outlet.

B.

On the switch rear panel, move the ON/OFF

switch to the ON position.

When you apply AC power:

The fans start.

The orange Power LED goes ON.

The Link/ACT LEDs turn on for every port

connected to a powered device.

Connecting

to this port…

…makes this

port unavailable

…connecting

to this port

This port is

unavailable when…

EX19164A PoE Switch Installation Guide

Product specificaties