EtherWAN EDGE 3 Handleiding
Pagina's 3 Niet gecategoriseerd
Bekijk de handleiding van EtherWAN EDGE 3 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

W70G- EDGE3-A- Page 1 Q1
Copyright 2026 EtherWAN Systems, Inc. All Rights Reserved May/6 25/202
Installation Guie
EDGE3 Series | Industrial IoT Wi-Fi Halow Transmitter
Unpacking
Open the carton and unpack the items. Your package should include:
▪One EDGE3-A-(XX), IEEE802.11ah antenna, WiFi antenna and Terminal Block.
Note that the (XX) indicates country models.
If any items are missing or damaged, notify your EtherWAN representative. If
possible, save the carton and packing material in case you need to ship or store
the device in the future.
Management Webpage Login
1.The system is ready 1.5 mins after power-on.
2.Default IP Address: 192.168.1.10/ subnet mask 255.255.255.0
3.Access the EDGE3-A management webpage via a wired ethernet cable or WiFi
5. EDGE3-A default disables DHCP server. Please set a static IP address for
laptop or desktop. (For example, 192.168.1.250/255.255.255.0)
4.Login using secure HTTPS
5.Account: admin
6.Password: (please check the label on the side of the EDGE3-A.)
EDGE3 Halow Network Architecture Setting
1The EDGE3-A connectivity is 1 AP mode connecting 50 Stations.
2All EDGE3-As ship with 11ah Halow disable.
3Choose any EDGE3-A and set it to AP mode.
3.1Web login https://192.168.1.10
3.2Networking/Device IP set static IP
3.3Networking/ WiFi/ 11ah enable and mode AP
3.4Record the AP mode SSID and Password for the STA to connect.
3.5Save/ make sure Save & Apply .
4Configure all other EDGE3-As to 11ah Enable and Station mode, with the
same SSID and Password as the AP device.
4.1Web login https://192.168.1.10
4.2Networking/Device IP set static IP
4.3Networking/ WiFi/ 11ah enable and mode STA, and use the same SSID
and password as the AP device.
4.4Save/ make sure Save & Apply .
5Mode and Display
Setup Procedures:
Modify IP
Save & Apply
Set 11ah mode
Save & Apply
Setup Procedures:
Modify IP
Save & Apply
Set 11ah mode
Save & Apply

W70G- EDGE3-A- Page 2 Q1
Copyright 2026 EtherWAN Systems, Inc. All Rights Reserved May/6 25/202
Installation Guie
EDGE3 Series | Industrial IoT Wi-Fi Halow Transmitter
Reset Button
Press button process
▪0-5 second: restart system (Halow 4 LEDs flashing)
▪more than 6 seconds: automatic entry reset default (Halow 4 LEDs on)
Select a Location and Installation
▪Choose a dry area with an ambient temperature between -30 and ºC (- 7522
and 1ºF). 67
▪The product is indoor use only.
▪Installation: Place the EDGE3-A on the DIN rail from above using the slot.
Push the front of the switch toward the mounting surface until it audibly
snaps into place. If you install two device units at the same time, the gap in
between the units must be 5 cm. ≥
Connect the antenna
The long antenna is used in the Halow socket.
The short antenna is used in the WiFi socket.
Connect Power
The EDGE3-A has two pairs of power inputs. Connect the supply voltage to start
up the device via the terminal block.
Power rating:
▪12 VDC, max.3W –24
▪The power input specification complies with the requirements of SELV (Safety
Extra Low Voltage) and LE (Limited Energy), and the power supply should
comply with UL 61010-1 and UL 61010-2-201.
Terminal Block
The EDGE3-A two power inputs on a 12-VDC provides24and
RS485 terminal block.
Pin
State
Description
Earth Terminal
Power 1
-
12-24V, max. 3W DC
+
Power Ground
Power 2
-
12-24VDC, max. 3W
+
Power Ground
RS485
D+
Data +
D-
Data -
SG
Signal Ground
AI/DI/DO Connect
Pin
State
Description
A1
+
Analog Input Voltage: 0-10VDC ; Current: 4-20mA
-
Negative
A2
+
Analog Input Voltage: 0-10VDC ; Current: 4-20mA
-
Negative
DI
+
“Logic 0”: 0-2VDC, “Logic 1”: 5-30VDC
-
Negative
DO
+
Photo Relay Output ,
current capacity 30VDC/0.5A
-
Negative
LED Indicators
LED
Color
Status
PWR 1 & 2
Green
On: Power on
Off: Power off
Alarm
Red
On: System Alarm
Off: Normal State
WiFi 5
Green
On: WiFi 5 AP mode enable
Flashing: Client link
LAN1 & 2
Green
On: Link active
Flashing: Data transmission
Off: No link
RS485
Green
Flashing: Data transmission
AP
Green
On: 11ah AP mode
Sta
Green
On: 11ah Station mode
Flashing: Waiting link to AP
Halow
Green
11ah signal strength (only for Sta mode)
1 LED: -90dBm~ -80dBm
2 LEDs: -79dBm~ -70dBm
3 LEDs: -69dBm~ -60dBm
4 LEDs:<-60dBm

Copyright 2026 EtherWAN Systems, Inc. All Rights Reserved May/6 25/202
Installation Guie
EDGE3 Series | Industrial IoT Wi-Fi Halow Transmitter
Other Information
Power wiring information:
Use cable type - AWG (American Wire Gauge) 18-22 and corresponding pin type
cable terminals.
The rating of the power wire used must be at least 75°C.
Use Copper conductors only.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
For repair or maintenance needs, contact EtherWAN directly.
Informations de câblage d'alimentation:
Utilisez le type de câble - AWG (American Wire Gauge) 18-22 .
Le calibre du fil d'alimentation utilisé doit être d'au moins 75°C.
Utilisez uniquement des conducteurs en cuivre.
DESTINÉ À ÊTRE UTILISÉ AVEC DES CONDUCTEURS EN CUIVRE SEULEMENT.
Si la méthode d'utilisation de l'équipement diffère de celle décrite par le fabricant,
la protection assurée par l'équipement risque d'être altérée.
Contactez-nous pour l'entretien ou la reparation.
Label clean up:
▪Use a dry cloth to clean the labelling.
▪If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
▪The product is open type, intended to be installed in an industrial control
panel or an enclosure.
▪The installation safety of any system incorporating the equipment is the
responsibility of the assembler of the system.
Nettoyage de l’étiquette:
▪Nettoyez avec un chiffon doux et sec.
▪Si l’équipement est utilisé d’une façon non conforme aux directives du
manufacturier, il peut être endommagé.
▪Le produit est du type ouvert et doit être installé dans un coffret ou panneau
de contrôles industriel.
▪La sécurité d’une l’installation d’un système incorporant l’équipement est la
responsabilité de l’assembleur du système.
Manufacturer information:
EtherWAN Systems, I.nc
33F, No. 93, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City, 221 Taiwan
The full product manual can be downloaded from:
http://www.etherwan.com
Product specificaties
| Merk: | EtherWAN |
| Categorie: | Niet gecategoriseerd |
| Model: | EDGE 3 |
Heb je hulp nodig?
Als je hulp nodig hebt met EtherWAN EDGE 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden