ET2 Alumilux E41540-SA Handleiding

ET2 Verlichting Alumilux E41540-SA

Bekijk gratis de handleiding van ET2 Alumilux E41540-SA (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 30 mensen en kreeg gemiddeld 4.6 sterren uit 15.5 reviews. Heb je een vraag over ET2 Alumilux E41540-SA of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
C o n t e m p o r a r y
L i g h t i n g
PRODUCT NAME: Alumilux
ITEM NUMBER: E41540-SA / E41540-WT
Please consult your electrician for hanging fixture and wiring.
MADE IN CHINA
Page 1 of (2)
To prevent water intrusion, caulk around back-plate
where fixture meets the wall using outdoor silicone
sealant. Leave a small gap at the bottom to allow
moisture to exit.
WARNING: Wires need to be connected to driver found
in canopy and should not be connected directly to
power source or a short may occur.
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
2.)
Page 2 of (2)
1.)
3.)
4.)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
C
D
A
B
A
B
C
D
(A)
Backplate
(B)
Mounting bracket
(C)
Wire Nuts (x3)
(D)
Mounting screws (x2)
Step.4: Caulk around fixture with outdoor
silicone sealant to prevent water intrusion.
Leave a small gap at the bottom to allow
moisture to escape. Install fixture to back
plate (B) and tighten mounting screws (D)
to secure.
Step.1: Install Mounting bracket(A) to outlet box.
Step.2: Wire fixture to wires in outlet box.
Green/Copper wire is for Ground.
Step.3: Install Backplate(B) to Mounting
bracket(A).


Product specificaties

Merk: ET2
Categorie: Verlichting
Model: Alumilux E41540-SA

Heb je hulp nodig?

Als je hulp nodig hebt met ET2 Alumilux E41540-SA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden