ESI KeyControl 25 Handleiding

Bekijk gratis de handleiding van ESI KeyControl 25 (3 pagina’s), behorend tot de categorie Controller. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.6 sterren uit 4 reviews. Heb je een vraag over ESI KeyControl 25 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Thank you for choosing KeyControl 25 - a 25-key USB Mobile MIDI Controller.

Connection / Power Supply / Controls

KeyControl 25 gets connected via the included USB cable to your computer. This connection

powers the keyboard and is used to transfer the MIDI data to your computer. In addition, the

MIDI data is sent out via the MIDI output port that you can connect to other devices such as a

sound module. Just connect KeyControl 25, launch and congure your favorite audio software

and start playing!

KeyControl 25 can also be used standalone when connected to an optional 9V DC power

supply (not included). In this case the MIDI data will only be sent out via the MIDI output port.

Preset Select Mode on power-up

When KeyControl 25 is first powered up, the 10 Numeric Pads are used for Preset selection.

Press Pads 0-9 to change to the desired Preset.

MIDI Program Change Mode

If the “Preset/Prog.” button is pressed, “Preset/Prog.” button LED lights up and Numeric Pads

change to Program Change Mode. Input the Program Number using the Numeric Pads and

press Enter. You can Immediately send Program Change messages by using ＋ / - button.

Change Bank (1~8/9~16)

You can change the bank of Knobs and Wheels at right side of front panel by pressing the “1-

8/9-16” button. This toggles between the banks of 1-8 and 9-16.

Panic

Press the “Panic” button if a situation occurs that all notes are stuck. This sends MIDI Note Off

messages.

Edit Mode

You can configure the KeyControl 25 operation with Edit mode using the next 3 steps:

Step1. Press “Edit” button to enter Edit mode. The Edit button LED will light.

Step2. Choose the function that you want to edit using the Numeric Pad.

Step3. Enter a value using Numeric Pad or +/- button and press the “Enter”button. Mode

returns to the initial state of Edit Mode.

* You can exit to the initial state of Edit Mode by pressing “ESC” Key during any step.

Product specificaties