Epson ELPCB03N Handleiding
Bekijk gratis de handleiding van Epson ELPCB03N (3 pagina’s), behorend tot de categorie Beamer. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 1.5 reviews. Heb je een vraag over Epson ELPCB03N of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3
Connection & Control Box Operation Guide
1
■
How To Switch Input Sources
1
2 3
■
Part Names and Functions
Connect devices Change sources Projection starts
Temporarily interrupts video and audio output from
the projector or speakers, except for the [Mic] port
and the [AUX In] port.
Turns the projector power on or o.
Switches the source.
Turns the power on or o.
Adjusts the volume of the projector or the external
speakers.
Temporarily mutes the audio. While audio is muted,
the indicator of the mute button turns blue.
■
Input Ports
• When using a commercially available dynamic microphone, connect to the [Mic] port.
Plug-in power is not supported.
• When inputting audio from a portable audio player and such, connect the audio cable to
[AUX In] port. The audio input from
[AUX In] port is always played regardless of the select-
ed source.
• When the projector's source is set to HDMI, USB display, or LAN, audio from audio devices
connected to the [Mic] or [AUX In] ports cannot be simultaneously output from the projector's
built-in speakers.
• When connecting a recording device, connect the audio cable to
[REC Out] port. The audio
input from the audio input ports, the Aux In, and the Mic port is output. Audio is output in a
constant level and cannot be adjusted.
[Computer2] input port
[A/V Mute] button
[Projector] button
Input source
buttons
Input interface
cover
Operation indicator
Output ports
[Audio Mute] button
[Volume] dial
Power switch
[HDMI1] port
[HDMI2] port
[USB-A] port
[Mic] port (φ 6.3 mm stereo pin jack, 2 plugs)/
[Audio1] port
[Audio-L/R] port (RCA jack)
[Video] input port (RCA jack)
[USB-B] port
(Φ 3.5 mm stereo mini pin jack, 3 plugs)
[Volume] dial (mic input)
(Mini D-Sub 15-pin (female))
Connect cables according to your devices to use.
We recommend using a shielded cable.
[Computer1] input port
[Audio2] port
[AUX In] port
[REC Out] port
You can stop this device from entering sleep mode. Turn On the power switch while simultane-
ously holding down the [Projector] and the [LAN] buttons. To return to the original status, turn On
the po
wer switch while simultaneously holding down the [Projector] and the [A/V Mute] buttons.
Indicates the status of the Connection & Control Box.
(This does not indicate the status of the projector.)
Blue
:
Operating normally.
Orange
:
Sleep mode.
This device enters sleep mode after eight hours
of inactivity. Press any button to resume.
Blue
:
An error has occurred.
Unplug the Connection & Control Box, and con-
tact your dealer.
For inquiries:
Projector's “User's Guide”
Connects the projector to this device. See the Instal-
lation Manual for more details.
HDMI
2
■
Connection Examples
• When the projector only has one HDMI port, make sure you connect the HDMI cable to
the [HDMI1] port.
• If you switch the HDMI1 source and the HDMI2 source while playing a movie, the movie
may freeze. Stop the movie before switching sources.
Connect the ports in either of the following combinations.
When using [Computer1] input port
[Audio1] port
When using [Computer2] input port
[Audio2] port
Be sure to connect the projector and the computer directly, not via a USB hub.
Connecting with HDMI Cables
If you use a thick HDMI cable, it may disconnect under its own weight.
Use the HDMI cable clamp to secure the cable.
Connecting Using a Computer Cable
Connecting Using a USB Cable
If you output
audio
3
■
Switching Images
Input Source Button Image Input Audio Input*
Computer1 Computer1 Audio1
HDMI1 HDMI1 HDMI1
USB USB Display
⇔
USB-A USB Display/Audio2**
Computer2 Computer2 Audio2
HDMI2 HDMI2 HDMI2
HDMI3 HDMI3*** HDMI3***
Video Video Audio-L/R
LAN LAN LAN/Audio2**
Names and Functions of the Input Source Buttons
Press the Input Source buttons to input images and audio from the device connected to the port as
shown in the following table.
Switching sources may take a while.
*Audio from the [Mic] port or [AUX In] port on this device is also input.
**If the projector supports audio transfer using USB display or over a network, audio is input
through USB Display or LAN. When you use a projector that does not support audio transfer,
[Audio2] is input.
***Inputs images and audio from the device connected to the projector's HDMI3 port.
■
Troubleshooting
No images appear
Did you turn on the connected device? Turn on the power of the connected device.
Did you turn on the projector? Press the [Projector] button.
Did you press the correct Input Source button
for the connected device you want to play?
When no specic input source is selected, [Computer1] button is
automatically selected and images from the [Computer1] input port
are displayed. Press the correct Input Source button corresponding
to the connected device.
Did you press the [A/V Mute] button? Press the [A/V Mute] button again.
Is the operation indicator light on
Orange
? This device enters sleep mode after eight hours of inactivity. Press
any button and the indicator turns to
Blue
, press the Input Source
button.
The source can not be switched
Did you press the correct Input Source button
corresponding to the connected device?
Press the correct Input Source button.
Is the Message Broadcasting dialog dis-
played?
P
ress the [Projector] button and restart the projector.
The Connection & Control Box is not operating
Is the power of this product on? Turn on the power switch.
Is the power cable plugged? Plug in the power cable of the Connection & Control Box.
Is the operation indicator ashing
Blue
?
Unplug the power cable of the Connection & Control Box, and con-
tact your dealer.
F
or inquiries:
Projector's “User's Guide”
No sound comes out or the sound is faint
Is the projector's audio input setting correct? Check the projector's "A/V Output" or "Audio Settings".
Projector's “User's Guide”
Did you turn down the audio volume of the
projector or speakers too much?
Turn up the volume with the [Volume] dial.
Projector's or Speakers' “ ”User's Guide
Is the microphone level appropriately set for
the projector or this device?
Adjust the input level of the microphone.
Projector's “ ”, “Input Ports”User's Guide
Is the audio cable of the connected device
correctly connected?
Check the connection of the audio cable.
"Input Ports", " " - "Connection example for Installation Manual
outputting audio"
Is there a cable connected to the projector's
audio output port?
If a cable is connected to the projector's audio output port, sound
does not come out from the built-in speaker.
Product specificaties
| Merk: | Epson |
| Categorie: | Beamer |
| Model: | ELPCB03N |
Heb je hulp nodig?
Als je hulp nodig hebt met Epson ELPCB03N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Beamer Epson
4 Juli 2025
4 Juli 2025
3 Juni 2025
23 Mei 2025
12 Maart 2025
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024
Handleiding Beamer
- Smart Tech
- XGIMI
- Fun Generation
- Philips
- Sony
- Smart
- Atlantis Land
- Smartwares
- Sanyo
- Easymaxx
- Dahua Technology
- DTS
- Samsung
- Cameo
- Strong
Nieuwste handleidingen voor Beamer
6 Juli 2025
5 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
2 Juli 2025