Epcom TT-388DONGLE Handleiding

Epcom Dongle TT-388DONGLE

Lees hieronder de 📖 handleiding in het Nederlandse voor Epcom TT-388DONGLE (2 pagina's) in de categorie Dongle. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

1. Support HDMI1.3, compatible with HDCP1.2.

2. Highest resolution up to 1080p full HD.

3. Strong anti-interference ability by running at 5GHz

operation frequency .

4. Support point to point wireless configuration.

5. Support IR passback with 20-60KHz frequency.

6. 50 meters long range transmission distance.

7. Plug and play, easy installation.

· Package Contents

· Important Safety Notice

· Introduction

· Features

· Installation Requirement

· Panel Description

· Connection

HDMI display

HDMI Extender TX

sender x1pcs

HDMI Extender RX

receiver x1pcs

DC5V/2A power

adapter x1pcs

IR blaster extension

cable x1pcs

IR receiver extension

cable x1pcs

User manual x1pcs

This HDMI wireless extender includes transmitter unit and receiver unit,

allows to transmit and extend HDMI signal up to 50 meters long away

wirelessly, it has strong anti-interference ability by running at 5GHz

operation frequency, and supports point to point connection. IR passback

with 20-60KHz frequency helps to remote control the source device

from the receiver side. It is really a very good solution for meeting,

conference, home entertainment and multi-media education etc.

Note:

1) Transmission distance will be different due to the environment.

2) Wall, brick or glass will shorten the signal cover range or cause big

signal loss.

1. HDMI source device (DVD, PS3, Set top box, PC etc)

2. HDMI display device like SDTV, HDTV, and projector with HDMI port.

1. HDMI Extender TX sender

2. HDMI extender RX receiver

Connection instruction :

1) Connect HDMI input to HDMI source device and connect IR blaster

extension cable to IR OUT interface of the sender (TX).

2) Connect HDMI output to HDMI display device and connect IR

receiver extension cable to IR IN interface.

3) Power on the device (power led lights) and it works.

1) When the wireless signal transmits through wall, glass or other

obstacles, it will cause signal loss. Please install this device in

good environment with few obstacles.

2) The external environment wireless signal will affect transmission,

such as micro waver, wireless mouse and keyboard etc.

Note:

Please read below safety instructions carefully before installation and

operation:

1. Please pay attention to all the warnings and hints on this device.

2. Do not expose this unit to rain, moisture and liquid.

3. Do not put any stuff into the device.

4. Do not repaire the device or open the enclosure without professional

person guidence to avoid electronic shock.

5. Make sure good ventilation openings to avoid product overheating

damage.

6. Shut off power and make sure environment is safe before installation.

7. Do not plug-in/out the network cables and IR cables when it is in using

to avoid cables damage.

8. Use DC5V/2A only. Make sure the specification matched if using 3rd party

DC adapters.

IR blaster extension

cable interface

Connect with IR blaster extension cable. Please

put the IR blaster close to source device to best

transmit the IR signal from receiver

Connect with HDMI source device

HDMI input

Connections

indicator

,LED indicator keep on when HDMI signal input

blink when data is transmitted

Connect with USB power cable

Power input

Power indicator LED indicator turn on when power on

Wireless connections

indicator

It s on when the transmitter and the receiver ’

connect well with each other, otherwise, it s off’

Connect with DC5V/2A power adapterPower input

USB Cable

x1pcs

【】NOTE This device can be powered from the HDMI source device (which

with USB port) directly. However, when the transmission/connection is not

stable, or the output is not fluent, please connect a 5V plug (with USB port)

to the USB cable for power supply.

Connect with HDMI display deviceHDMI output

Data transmission

indicator

Led blinks slowly when it is building connection.

Led blinks fast when it is successfully connected

and transmitting data

Receive wireless signalAntenna

IR receiver extension

cable interface

Connect with IR receiver extension cable. Please

make sure the remote control is within the required

range of IR receiver

HDMI Wireless Extender

· Specification

· FAQ

Q: Transmitter and receiver can t be connected with each other?'

A: 1)Please check if the wireless connection light on product blinks

properly.

2) Re start the transmitter or receiver.

3) Re connect the HDMI c able.

Q: The wifi LED indicator of the transmitter is off, but no s ignal o utput

on display/monitor?

A: 1) please check if there is an HDMI signa l input of sender TX

2) Try to connect the sig nal source directly to display device to see if

there is signal output from sourc e device or c hange the signa l

sourc e, HDMI cables and try again.

Q: Display not fluent and stable

A: 1) Please move the position of sender (TX) and rec eiver (RX) and make

sure th e devic e is within the signal coverage.

2) Re start the transmitter or receiver.

3) Re connect the HDMI c able.

4) Re move other wireless signal disturbance and red uc e the

obstacle on the way.

Disclaimer

The product name and brand name may be registered trademark of

related manufa cturers. TM and ® ma y be omitted on the user manua l.

The pictures on the user manual are jus t for reference, and there may be

some s ligh t difference with t he real products .

We reserve t he rights to make changes wit hout further notice to a

product or sys tem described herein to improve reliability, function or

design.

HDMI

performanc e

and interface

A edudio forma ts Sup por t L R stereo audio/

Maximum transfe r rate 10.2Gbps

Input and output DDC signal 5Vp-p(TTL)

Input and output TMDS signal 0. ～1.5Vp-p(T MDS)7

Input cable length supported ≤5m(AWG2 6 HDMI 1.3c able stand ard)

Output cable length supported ≤5m(AWG2 6 HDMI 1.3c able stand ard)

Transmi ssio n method 5G Wireless transmi ssio n

Electrostatic protection

of the whole machine

1a Contact discharge level 3

Latency ≤200 ms

Wireless

performanc e

and interface

Transmi ssio n dist ance 50 Meters

Protection

level

Work ing temp erat ure 0 4～ 0℃

Storage tempera ture - 0～70℃2

Humidity (n o cond ensation ) 0～90%

Material RX: Iron alloy ma terial + c rystal pan el

TX Plastic:

Operating

Environment

Dimension

Finishin g Grit blast

Color Black

Weig ht TX： g， RX： g 30 220

Body

properties

TX: 88.90(W) x 3 8.99 (D) x15.17 (H)mm

RX: 131.65(W) x 95(D ) x 19.9 0(H)mm

1b Air discharge level 3

Standard: IEC61000-4-2

Mean time between failures

(MTBF) >30000 Hour sRelia bili ty

Power

Supply

Voltage/Current

Power consumption

TX DC5V 1 A RX 5V/2 A: / :DC

HDMI

Performance

A Ind nterface

HDCP1.2

HDMI resolution sup por te d

480i@60Hz 480p@60Hz、、

576i@50Hz 576p@50Hz、、

720p@50/60Hz 1080i@50/60Hz、、

1080p@50/60Hz

HDMI compli ance HDMI1.3

HDCP compliance

T 3 R 5 WX＜ W X＜

performanc e

and interface

Support IR pas sback with

20-60KHz frequency

IR remote control

Product specificaties

Merk:	Epcom
Categorie:	Dongle
Model:	TT-388DONGLE
Kleur van het product:	Zwart
Gewicht:	528 g
Breedte:	195.4 mm
Diepte:	137 mm
Hoogte:	30.8 mm
Stroombron:	Interfacepoort
Interne opslagcapaciteit:	- GB
Frequentieband:	5 GHz
Ondersteunde video-modi:	1080p
DC voltage input:	5 V
HDCP:	Ja
Maximale videoresolutie:	1920 x 1080 Pixels
HD type:	Full HD
Intern geheugen:	- MB
HDMI:	Ja
HDMI versie:	1.3
Plug and play:	Ja
Aansluiting:	HDMI
Bedrijfstemperatuur (T-T):	0 - 60 °C
Werkzame stroming:	2 A