Emerson NR30 Handleiding

Emerson Niet gecategoriseerd NR30

Lees hieronder de 📖 handleiding in het Nederlandse voor Emerson NR30 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Thank you… … … … for purchasing this Emerson high quality radio. We realize that many consumers enjoy listening to the

endless variety of music on their favorite radio stations rather than on CDs or tapes. That’s why we created this great

sounding, but economical and simple-to-use radio. We think you will be amazed by the quality of the sound produced by

this compact sized system.

We have taken great care during the manufacturing and testing of this product. Every component in this system was in

perfect working order when it left our factory. It has been designed to provide you with many years of musical enjoyment

and trouble free operation with an absolute minimum of care and maintenance. If you encounter any problems with the

set-up or operation of this system, please do not return it to the retail store. Please call the Emerson Customer Service Hot

Line, toll free, at 800-898-9020. One of our representatives will attempt to solve the problem for you. If it is not possible to

solve the problem by phone, you will be instructed on the procedure to obtain a replacement unit.

Once again, thanks for purchasing this Emerson audio product.

The serial number of your system is located on a label on the back panel of the main unit. Please take a moment now to

record the serial number in the space provided below. You may be asked to supply this number in the unlikely event that

you need to call our Customer Service Hot Line.

Model Number: NR30

Serial Number:

PREPARATION FOR USE

UNPACKING AND SET-UP

• Carefully remove the radio from the display carton and remove all packing materials from the radio.

• Unwind and fully extend the AC power cord and the FM wire antenna located on the back panel.

• Place the main unit on a stable, level surface such as a table, shelf, or stand, out of direct sunlight, and away from

sources of excess heat, dust, vibration, moisture, and humidity.

POWER SOURCE

This system is designed to operate on normal 120V/60Hz AC house current only. Attempting to operate this system on

any other power source could cause damage to the system, and such damage is not covered by your warranty.

Note:This unit has a polarized AC plug with one wide blade and one narrow

blade. This plug will only fit into a matching polarized AC outlet. This is a safety

feature to reduce the possibility of electric shock. If this plug will not fit in your AC

outlet, you probably have an outdated non-polarized outlet. You should have your

outdated outlet changed by a qualified, licensed electrician. Do not file the wide

blade on the plug, or use an adapter to make the plug fit into your outlet. This

defeats the safety feature and could expose you to electric shock.

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls.

These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on

your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause

the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we

strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement

centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden

furniture.

M eod l : NR30

A F RM/ M ad oi

Vi i w i wwws t our eb s t te a . .e e on ad om rs r i com

AC Plug

AC Outlet

NR30_050304.p65 3/5/2004, 14:501

LOCATION OF CONTROLS

OPERATING INSTRUCTIONS

AUX

• Extend and position the FM Wire Antenna to its full length for best FM reception.

• Connect the AC power cord to your household AC outlet.

1.) Set the Power/Band selector to the FM or AM position. The POWER ON indicator light comes ‘On’.

2.) Rotate the Tuning knob to tune to the desired station.

3.) Adjust the VOLUME control to the desired level.

4.) When you are finished listening, set the Power/Band selector to the ‘OFF’ position. The POWER ON indicator

light goes ‘Off’.

Hints For Better Reception

If FM reception is noisy or weak, try changing the position and direction of the FM wire antenna until you find the

position that provides the best reception.

If AM reception is unsatisfactory, try repositioning the main unit slightly until the internal AM bar antenna picks up the

strongest signal.

PHONES Jack

For private listening without disturbing others connect a set of stereo headphones (not included) to the PHONES

jack on the back panel of the main unit. The headphones should have a 3.5mm mini plug. The speaker shuts off

automatically when headphones are connected.

To protect your hearing always set the VOLUME control to a low level before you connect the headphones. Then put

the headphones on and gradually increase the VOLUME control to a comfortable listening level.

AUX IN (Auxiliary Input) Jack

The Auxiliary Input jack allows you to listen to external audio devices, such as a personal CD player for example,

through the speaker of this system.

Connect your external device to the AUX IN jack on the back panel, (connection cables are not included). The AUX

LED indicator lights up.

Operate your external device as you would normally and adjust the VOLUME control of this system to the desired

level.

IMPORTANT NOTE:

You must disconnect your external device from the AUX IN jack of this system in order to listen to the radio

again.

2 3

Front Panel

1.) Speaker.

2.) POWER ON Indicator.

3.) AUX Indicator.

4.) Power OFF / FM / AM Selector.

5.) FM Dial.

6.) Tuning Knob.

7.) AM Dial.

8.) VOLUME Control.

Back Panel

9.) AUX IN Jack.

10.) FM Wire Antenna.

11.) Speaker Port.

12.) AC Power Cord.

13.) PHONES Jack.

13 12

NR30_050304.p65 3/5/2004, 14:502

CARE AND MAINTENANCE

NOTE: There are no user serviceable parts in this system. Any required service must be performed only by qualified

electronics service technicians at Emerson authorized service centers.

If the cabinets become dusty they should be wiped with a soft dust cloth only. Do not use any aerosol dusting sprays or

furniture polish.

If the front panels become smudged with fingerprints they may be wiped with a soft cloth, slightly dampened with a mild

soap and water solution. Do not use any type of abrasive cleaning powders or abrasive cleaning pads, as these will

scratch the finish on your system.

CAUTION:

Disconnect the unit from the AC outlet while cleaning and never allow any water, or any other liquid, to enter the

cabinet.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

L TEI IM D WARRAN YT

Eme arson R d o o p n nu u ng d n o g n n ud ng o g n pi C r . wa arr ts ma fact ri e ecf t is ri i a a e al m t ri l i, cl i ri i al a arts nd o k w r man h p unds i , er

no urmal se a nd ond on o p od o n n y 90 d y o h d o o g n pu h c iti s, f r a eri f i et ( ) a s fr m t e a et f ri i al rc a es i t itn he U. .S W h you d d p oor a et r f

o pu h p ov d p v no h g of rc a e es , w will r i e e r a eir s r i tce a c ar e f r labor and p a a arts t n u ho d a t rize De e a acpot R p ir F ility, o p hr r e l tace e

p odu n ou d on you y o op p op y du ng h n y p od du or ct i r i tisc er . If r s s st ile am f t e a er t r erl ri t e a a w rr t eri e t a a m nufac e ect iur ng d f t, do

no u n h y o h o h on u o v o n o 1 800 898 9020t t re r t e s st tem t e e a r t il t s re ea e ca. Pl s ll t e e Em rs C st me er S r ice H tli e t ll t free a - - - . We will

d gno h p ob nd n u you ho o h v you y p d o p d ou d onia se t e r le am i str ct w t a e r s ste em r a eir r r e lace , at r i tisc er .

Th n y do no ov d g o n g g n u bu d n u o o o op ng n u onis wa arr t es t c er a am e fr m e li e ce, mis se a, se acc, i e t il, fa re t f ll w e ar ti i str cti s,

c e c a e e a e a a a ze acomm r i l us , r nt l, r p irs by n un u hot ri d f ility, , , o p odu pu h dr r cts rc a es u dse s se ce a a ervi d o d r m g d ou t i td oe f he

Un dite St ta es.